Utgått

DB9M to DB25M Serial Adapter

Convert a DB9 female port to a DB25 male port

Produkt ID: AT925MM

This convenient Serial Adapter features a DB9 (9 pin) Male connector and a DB25 (25 pin) Male connector, allowing you to link a device with a 9 pin female connector to a serial device with a 25 pin female connector.

Användning

  • Converts a 25 pin serial port to a 9 pin

Fördelarna med StarTech.com

  • A cost-effective way of converting a 9-pin female serial port to a 25-pin male port
  • Easy to use and intall
  • Backed by StarTech.com's lifetime warranty

Partnernummer

  • UPC 065030200936

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Length 82 mm [3,2 in]
Package Width 21 mm [0,8 in]
Package Height 15,2 cm [6,0 in]
Fraktvikt (förpackning) 0,0 kg [0,1 lb]
Kontakt(er) 1 - Connector A DB-9 (9-stifts, D-Sub)
1 - Connector B DB-25 (25-stifts, D-Sub)
Utseende Färg Grå
Vad det är i lådan 1 - Ingår i paketet 9 to 25 Pin Adaptor M/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

A straight-through serial cable is the most common type of serial cable, used to connect a Data Terminal Equipment (DTE) device (for example, a computer) to a Data Communications Equipment (DCE) device (for example, a modem). The pinout of the serial connectors on both sides of the cable are exactly the same with a straight-through serial cable.

A null modem serial cable (frequently called a crossover cable) is used to connect two DTE devices together without the use of a DCE device in between. For this to happen, the Transmit (TXD) and Receive (RXD) pins on one of the serial connectors are flipped.

To confirm the type of serial cable that is required for your device or configuration, refer to the information provided by the manufacturer.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen