12in Fan Adapter - TX3 to 2x LP4 Power Y Splitter Cable

Connect a TX3 fan directly to the power supply

Produkt ID: CPUFANADAPT

Ditt pris
€1,99 EUR excl. VAT
€2,49 EUR incl. VAT

This 12in 3-pin (TX3) to LP4 Power Y-cable lets you connect your CPU fan directly to the computer power supply, instead of connecting it to the designated motherboard port.

The adapter cable features a TX3 connector for connecting to the CPU fan, as well as a female LP4 connection to the computer power supply and an extra LP4 male connector that compensates for the used of the LP4 connector used to connect to the power supply.

This high quality adapter is backed by StarTech.com's Lifetime Warranty.

Användning

  • Allows a fan with a TX3 motherboard connector (2 pins connected) to draw power from a standard LP4 power supply connector

Fördelarna med StarTech.com

  • Connect a TX3 fan directly to the power supply, allowing for installation of extra fans in your system
  • Easy to use and install
  • Backed by StarTech.com's lifetime warranty

Partnernummer

  • UPC 065030783293

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 12 mm [0,5 in]
Package Length 12,5 cm [4,9 in]
Fraktvikt (förpackning) 14 g [0,5 oz]
Package Width 90 mm [3,5 in]
Kontakt(er) 1 - Connector A LP4 (4-stift, Molex-type Large Drive Power)
1 - Connector B Molex-fläkt (3-stifts, TX3)
LP4 (4-stift, Molex-type Large Drive Power)
Utseende Produktvikt 12 g [0,4 oz]
Kabellängd 0 mm [0,0 in]
Produktlängd 0 mm [0,0 in]
Vad det är i lådan 1 - Ingår i paketet 6" 3 Pin to Large Internal Power CPU Fan

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen