1 ft DVI-D to DVI-D & HDMI Splitter Cable - M/F

Display a DVI-D signal on a DVI and HDMI®-equipped monitor simultaneously

Produkt ID: DVISPL1DH

  • Compatible with computers and HDTV video sources (satellite receivers, DVD players, etc) with DVI outputs
  • Support for high-resolution images
  • Lifetime warranty and FREE LIFETIME tech support
Ditt pris
€20,99 EUR excl. VAT
€26,24 EUR incl. VAT

This 1ft DVI to DVI+HDMI Splitter Cable splits the digital DVI signal output by a computer or satellite receiver into one DVI and one HDMI output, allowing you to view content on one DVI display and one HDMI display simultaneously.

Backed by lifetime warranty, our DVI to DVI + HDMI splitter cable offers guaranteed durability and reliability.

Användning

  • This DVI-D splitter cable makes things easy with being able to instantly connect 1-DVI-D and 1-HDMI displays to a single digital DVI source
  • Ideal for use LCD TV, LCD Projectors, Plasma TV, HDTV and DVD Player and set-top box

Fördelarna med StarTech.com

  • Lifetime warranty and FREE LIFETIME tech support
  • Saves money and reduces clutter by combining high bandwidth video with digital audio connections in a single cable

Partnernummer

  • UPC 065030825887

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 47 mm [1,9 in]
Package Length 22,5 cm [8,9 in]
Fraktvikt (förpackning) 0,1 kg [0,3 lb]
Package Width 12,5 cm [4,9 in]
Kontakt(er) Connector A 1 - DVI-D (25-stifts)
Connector B 1 - DVI-D (25-stifts)
1 - HDMI (19-stifts)
Prestanda Maximal digital upplösning 2560 × 1600 @ 60Hz
Särskilda anmärkningar/krav Obs. This product will split your video signal to deliver two identical images of the same resolution. It cannot be used to span an image across two displays, or to show different images on each display.
Utseende Produktvikt 141 g [5,0 oz]
Färg Svart
Tråddimension 28 AWG
Kabellängd 304,8 mm [12,0 in]
Produktlängd 30,5 cm [12,0 in]
Vad det är i lådan Ingår i paketet 1 - 1 ft DVI-D to DVI-D & HDMI Splitter Cable - M/F

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video splitter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.

Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.

If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:

  1. Unplug all of the video connections.

  2. If the splitter is powered, power cycle the splitter.

  3. Plug in all of the video connections again.

  4. Make sure that the first video connection plugged in is the one that you want to be the master port.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen