DVI till VGA-kabeladapter – Svart- F/M

Använd din DVI-I-skärm med ett VGA-videokort

Produkt ID: DVIVGAFMBK

  • Gjutna kontakter med tumskruvar
  • Snabb och enkel installation Inga inställningar eller program behövs.
Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT

DVIVGAFMBK DVI-A till VGA-skärmadaptern (F/M) används för att konvertera en DVI-hankontakt till en VGA-hankontakt.

Adaptern för anslutning mellan DVI och VGA är tillverkad i material av högsta kvalitet för att garantera pålitlighet och täcks av StarTech.coms livstidsgaranti.

Obs.: Denna produkt är avsedd för anslutningar mellan DVI-I-enheter för att skicka analoga signaler till VGA-enheter. Om din enhet använder en DVI-D-kontakt, se StarTech.coms DVI till VGA-konverterare DVI2VGACON.

Användning

  • Anslut en DVI-I-skärm till ett VGA-videokort (plattskärmar, projektorer och HDTV-apparater)

Fördelarna med StarTech.com

  • Kostnadseffektiv lösning för anslutning av en analog plattskärm till en PC eller Mac® med VGA-utgång
  • Täcks av StarTech.coms livstidsgaranti

Partnernummer

  • Ingram Micro Sweden V931274
  • ALSO Sweden 000000000002763871
  • UPC 065030841689

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 1,6 cm [0,6 in]
Package Length 12,5 cm [4,9 in]
Fraktvikt (förpackning) 36,0 g [1,3 oz]
Package Width 9,0 cm [3,5 in]
Hårdvara Active or Passive Adapter Passive
Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er) 1 - Connector A VGA (15 pin, High Density D-Sub)
1 - Connector B DVI-I (29 pin)
Utseende Produktvikt 34,0 g [1,2 oz]
Produktlängd 5,3 cm [2,1 in]
Produktbredd 4,1 cm [1,6 in]
Produkthöjd 1,5 cm [0,6 in]
Färg Black
Kontakttyp Straight
Vad det är i lådan 1 - Ingår i paketet DVI till VGA-kabeladapter – Svart- F/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

This is a passive video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen