DVI till VGA-kabeladapter - M/F

Anslut din VGA-skärm till en DVI-I-källa

Produkt ID: DVIVGAMF

  • DVI-I-kontakt (hane) till VGA-kontakt (hona)
Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT

DVIVGAMF DVI-I till VGA skärmadapter (m/f) används till att konvertera en DVI hankontakt till en VGA honkontakt och möjliggör anslutning av en plattskärm till en PC eller MAC® med DVI-I-uttag.

Adaptern för anslutning mellan DVI och VGA är tillverkad i material av högsta kvalitet för att garantera pålitlighet och täcks av StarTech.coms livstidsgaranti.

Obs.: Denna produkt är avsedd för anslutningar mellan DVI-I- och VGA-enheter. Om din enhet använder en DVI-D-anslutning, se StarTech.coms DVI till VGA-konverterare DVI2VGACON.

 

Användning

  • Anslut en VGA-skärm till ett DVI-I-videokort

Fördelarna med StarTech.com

  • Kostnadseffektiv lösning för att ansluta en VGA-skärm till ett DVI-I-videokort
  • Täcks av StarTech.coms livstidsgaranti

Partnernummer

  • Ingram Micro Sweden V930363
  • ALSO Sweden 000000000002764249
  • UPC 065030787598

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 15 mm [0.6 in]
Package Length 12.5 cm [4.9 in]
Fraktvikt (förpackning) 32 g [1.1 oz]
Package Width 90 mm [3.5 in]
Hårdvara Active or Passive Adapter Passiv
Kontakt(er) 1 - Connector A DVI-I (29-stifts)
1 - Connector B VGA (15-stifts, High Density D-Sub)
Utseende Produktvikt 28 g [1.0 oz]
Färg Beige
Vad det är i lådan 1 - Ingår i paketet DVI till VGA-adapter M/F

Tillbehör

MXT101MMHQ3

3 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€14,99 EUR excl. VAT
€18,74 EUR incl. VAT
MXT101MMHQ25

7,6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
MXT101MMHQ30

30 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€29,99 EUR excl. VAT
€37,49 EUR incl. VAT
MXT101MMHQ35

10,6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€36,99 EUR excl. VAT
€46,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

This is a passive video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

In order for this DVI to VGA adapter to operate correctly in your setup, make sure that the following is true:

  • The video source is DVI-I or DVI-A (analog signals must be present).

  • The video destination is VGA.

DVI to VGA adapter cables are passive and simply use the pins from a DVI-I source to convert to VGA.

If you are using a DVI-D source and want to convert to VGA, you need an active adapter, such as the DVI2VGAE. You can find more DVI-D adapters at http://www.startech.com/AV/Converters/Video/.

Note: The analog VGA signal (DVI-A) must be present on the DVI-I interface. Some DVI-I receptacles may have all 29 pins for DVI-I, but only have a DVI-D signal present. To determine what type of DVI port you have, refer to http://www.startech.com/faq//video_signal_converters_dvi_interface.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...