1,8 m skärmad extern eSATA-kabel M/M

Anslut dina externa SATA-lagringsenheter till din bärbara eller stationära dator.

Produkt ID: ESATA6

  • Kompatibel med seriell ATA III-specifikationer<br /> Snabba dataöverföringshastigheter på upp till 6 Gbps
Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT

Denna skärmade eSATA-kabel ger en anslutning på 1,8 m av hög kvalitet mellan en stationär eller en bärbar dator och externa SATA-lagringsenheter så att du kan "externalisera" de imponerande förmågorna med seriell ATA.

Fördelarna med StarTech.com

  • Upp till sex gånger snabbare än samtida externa lagringslösningar: USB 2.0 och FireWire (IEEE 1394)
  • Robust och användarvänlig extern anslutning
  • Högpresterande, kostnadseffektiv förlängning

Partnernummer

  • UPC 065030818476

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 10 mm [0,4 in]
Package Length 25,5 cm [10,0 in]
Fraktvikt (förpackning) 136 g [4,8 oz]
Package Width 12,5 cm [4,9 in]
Kontakt(er) 1 - Connector A eSATA (7-stifts, data)
1 - Connector B eSATA (7-stifts, data)
Utseende Produktvikt 131 g [4,6 oz]
Färg Svart
Kabellängd 1,8 m [6,0 ft]
Produktlängd 1,8 m [6,0 ft]
Vad det är i lådan 1 - Ingår i paketet 1,8 m skärmad extern eSATA-kabel M/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen