Produkt ID: ESATAPLT18IN
ESATAPLT18IN SATA till eSATA-täckplåtsadaptern på 45 cm med 1 port lägger till externt datastöd genom att använda en befintlig seriell ATA-kontroller på moderkortet. Montera helt enkelt täckplåten på bakpanelen på chassit som en förlängning av moderkortets SATA-datakontakt för att lägga till en port för anslutning av externa SATA-lagringsenheter (t.ex. extern eSATA-hårddisk).
SATA-eSATA-adaptern är designad att dra nytta av den ökade dataintegriteten från externa hårddiskar eller RAID-enheter som stöder eSATA-anslutningar och stöder dataöverföringshastigheter på upp till 6 Gbps samt täcks av StarTech.coms livstidsgaranti.
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 22,0 cm [8,7 in] |
Package Length | 0,7 mm [0,0 in] | |
Fraktvikt (förpackning) | 280,0 g [9,9 oz] | |
Package Width | 12,8 cm [5,0 in] | |
Förpackningsantal | 1 | |
Hårdvara | Kabelmanteltyp | PVC - Polyvinyl Chloride |
Kontakt(er) | 1 - Connector A | eSATA (7-stifts, data) |
1 - Connector B | SATA (7-stifts, data) | |
Miljö | Drifttemperatur | 0°C to 50°C (32°F to 122°F) |
Förvaringstemperatur | -20°C to 70°C (-4°F to 158°F) | |
Luftfuktighet | 0% to 90% RH | |
Utseende | Produktvikt | 270,0 g [9,5 oz] |
Färg | Röd | |
Kontakttyp | Rak | |
Kabellängd | 45,7 cm [18,0 in] | |
Produktlängd | 45,7 cm [18,0 in] | |
Produktbredd | 12,0 cm [4,7 in] | |
Produkthöjd | 21,0 mm [0,8 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 45 cm SATA till eSATA PCI-täckplåtsanslutning med 1 port |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
SATA cable
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.