Utgått

DisplayPort könbytare - f/f

Koppla ihop två DisplayPort®-kablar till en lång kabel

Produkt ID: GCDPFF

DisplayPort könbytaren har två DisplayPort honkontakter - en enkel och kostnadseffektiv lösning för att koppla ihop två kort DisplayPort-kablar till en lång kabel.

Könbytaren är hållbart konstruerad med gulpläterade kontakter och en låsdesign för att undvika glidningar. Täcks av livstidsgaranti.

Användning

  • Förläng enkelt räckvidden på DisplayPort-kablar

Fördelarna med StarTech.com

  • Enkel att använda och att installera
  • Täcks av StarTech.coms livstidsgaranti

Partnernummer

  • UPC 065030835572

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Fraktvikt (förpackning) 0 g [0,0 oz]
Package Length 0 mm [0,0 in]
Package Width 0 mm [0,0 in]
Package Height 0 mm [0,0 in]
Hårdvara Antal ledare 20
Kontaktplätering Guld
Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er) 1 - Connector A DisplayPort (20-stifts)
1 - Connector B DisplayPort (20-stifts)
Utseende Produkthöjd 0 mm [0,0 in]
Produktvikt 0 g [0,0 oz]
Produktbredd 0 mm [0,0 in]
Färg Blå
Produktlängd 0 mm [0,0 in]
Vad det är i lådan 1 - Ingår i paketet DisplayPort könbytare - f/f

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen