Utgått

4ft Retractable High Speed HDMI Cable -HDMI to HDMI Mini - M/M

Connect next-generation cameras, tablets and other devices incorporating HDMI® Mini Connector technology anywhere you go

Produkt ID: HDACRET4

  • High quality, gold-tipped connectors
  • Retractable cable design

The HDACRET4 4-foot Retractable High Speed HDMI® Cable lets you connect devices with an HDMI Connector (type A) to a display or device with an HDMI Mini (type C) Connector.

This cost-saving solution connects cutting-edge and next-generation devices that incorporate HDMI technology; an on-the-go solution, this compact, lightweight cable fits nicely into any camera or laptop bag.

Användning

  • A single-cable solution for quickly connecting your HDMI®-capable A/V devices
  • Supports the full HDMI High Speed specification
  • Provides for optimal resolution

Fördelarna med StarTech.com

  • Gold-plated conductors provide high-frequency responses, for optimal resolution
  • Retractable HDMI® cable eliminates the bulk and inconvenience of carrying your audio/video cables inside camera bags, laptop bags and other carrying cases
  • Backed by StarTech.com Lifetime Warranty

Partnernummer

  • UPC 065030844628

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Förpackningsantal 1
Package Length 22,5 cm [8,9 in]
Package Width 12,5 cm [4,9 in]
Package Height 20 mm [0,8 in]
Fraktvikt (förpackning) 69 g [2,4 oz]
Hårdvara Kontaktplätering Guld
Kabelmanteltyp PVC - Polyvinyl Chloride
Kabelskärmning Aluminiummylarfolie med jord-tråd
Kontakt(er) 1 - Connector A HDMI (19-stifts)
1 - Connector B Mini HDMI (19-stifts)
Utseende Färg Svart
Tråddimension 36 AWG
Kabellängd 1,2 m [4,0 ft]
Produktlängd 1,2 m [4,0 ft]
Produktbredd 60 mm [2,4 in]
Produkthöjd 20 mm [0,8 in]
Produktvikt 64 g [2,3 oz]
Vad det är i lådan 1 - Ingår i paketet 4ft Retractable High Speed HDMI® Cable -HDMI to HDMI Mini - M/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with an HDMI cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • HDMI cable

  • Video source

  • Video destination

To test your setup components, try the following:

  • Use the HDMI cable, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different HDMI cable, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the HDMI cable, video source, and video destination, it is recommended that you do the following:

  • Verify that the source resolution matches the capabilities of the video source destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p or 1920 x 1080, as that exceeds the capabilities of the video source destination.

  • Test at a lower resolution, for example, 1024 x 768.

  • If you are using 4K resolutions, test with a shorter cable.

If you are experiencing issues with audio over HDMI, ensure that the following is true:

  • The source is set up to output audio over HDMI.

  • The destination is compatible with the source's audio format.

  • The destination's volume was raised.

Note: HDMI to DVI cables, adapters and converters do not support audio unless otherwise noted in the Technical Specifications tab on the product page on the StarTech.com website.

Before You Buy

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...