HDMI till DVI-D-videokabeladapter - F/M

Anslut DVI-enheter till HDMI®-enheter och tvärtom

Produkt ID: HDMIDVIFM

  • Konvertera DVI-D till HDMI®
  • Konvertera HDMI till DVI-D
Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT

HDMIDVIFM HDMI® till DVI-D-videokabeladapter har en HDMI-honkontakt och en DVI-D-hankontakt som möjliggör en dubbelriktad anslutning mellan HDMI-enheter och DVI-D-enheter för att slippa kompatibilitetsproblem.

Denna högkvalitativa kabel är framtagen och tillverkad för att ge pålitlig HDMI till DVI-anslutning och täcks av StarTech.coms livstidsgaranti.

Användning

  • Anslut HDMI®-enheter till DVI-D-enheter
  • Anslut DVI-D-enheter till HDMI-enheter

Fördelarna med StarTech.com

  • Eliminerar behovet av flera kablar och kabelhärvor genom att den har dubbelriktad anslutning mellan HDMI- och DVI-D-kompatibla enheter
  • Täcks av StarTech.coms livstidsgaranti

Partnernummer

  • Ingram Micro Sweden V930491
  • ALSO Sweden 000000000002764170
  • UPC 065030811385

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 17 mm [0,7 in]
Package Length 12,5 cm [4,9 in]
Fraktvikt (förpackning) 37 g [1,3 oz]
Package Width 90 mm [3,5 in]
Hårdvara Active or Passive Adapter Passiv
Kontaktplätering Guld
Kontakt(er) 1 - Connector A HDMI (19-stifts)
1 - Connector B DVI-D (25-stifts)
Prestanda Maximal digital upplösning 1920x1200
Utseende Produktvikt 35 g [1,2 oz]
Färg Svart
Produktlängd 50 mm [2,0 in]
Produktbredd 43 mm [1,7 in]
Produkthöjd 15 mm [0,6 in]
Vad det är i lådan 1 - Ingår i paketet HDMI till DVI-D-videokabeladapter - F/M

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Before You Buy

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

This is a passive video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

The HDMI to DVI-D adapter or cable is a bi-directional adapter or cable, which allows both HDMI and DVI to be the source or destination.

HDMI contains digital video and audio, while DVI usually only carries video. If you use these adapters or cables, they will transmit video but not audio.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen