Utgått

18in Latching Round SATA Cable

Connect latching SATA drives while helping to ensure optimal airflow throughout a desktop or server case

Produkt ID: LSATARND18

  • Round cable with straight latching connections
  • Supports fast data transfer rates of up to 6 Gbps when used with SATA 3.0 compliant drives
  • Compliant with SATA 6Gb/s Specifications

The LSATARND18 18-inch latching round SATA cable is a high quality SATA 6Gbps cable that features a rounded design to help improve airflow inside a computer or server case by providing less resistance as air passes around the cable, in turn helping to ensure optimal cooling for optimized system performance.

This durable cable also features latching connectors, which lock when connected to a supporting (latchable) SATA port to, ensuring a snug, secured data connection every time to prevent accidental disconnects.

Backed by Lifetime Warranty.

Användning

  • Connecting servers, SATA drive arrays and storage subsystems
  • Compatible with Serial ATA Hard Drives, CD-RW, DVDs, and other devices

Fördelarna med StarTech.com

  • Rounded cable design provides less airflow resistance than standard designs, which helps improve air flow within a computer/server case for optimum system performance
  • Latching connectors secure the cable against accidental disconnection
  • Backed by StarTech.com Lifetime Warranty

Partnernummer

  • UPC 065030845854

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 10 mm [0,4 in]
Package Length 22,5 cm [8,9 in]
Fraktvikt (förpackning) 16 g [0,6 oz]
Package Width 12,5 cm [4,9 in]
Förpackningsantal 1
Hårdvara Kabelmanteltyp PVC
Kontakt(er) 1 - Connector A SATA (7-stifts, data)
1 - Connector B SATA (7-stifts, data)
Prestanda Typ och hastighet SATA III (6 Gbps)
Utseende Produktvikt 11 g [0,4 oz]
Färg Svart
Kontakttyp Med lås
Tråddimension 30 AWG
Kabellängd 45,7 cm [18,0 in]
Produktlängd 45,7 cm [18,0 in]
Produktbredd 14 mm [0,6 in]
Produkthöjd 8 mm [0,3 in]
Vad det är i lådan 1 - Ingår i paketet 18in Round Latching SATA Cable

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...