Produkt ID: PYO2LP4SATA
Denna 30 cm LP4 till SATA ström Y-kabeladapter har två seriella ATA-strömkontakter (honkontakt) och en LP4 hankontakt - en pålitlig lösning som låter dig använda två SATA-enheter med en enda LP4-anslutning till nätaggregatet.
Denna hållbara LP4/SATA Y-kabeladapter är 30 cm lång vilket ger dig tillräcklig räckvidd för att placera enheter i chassit och samtidigt slippa kostnaden och besväret med att uppgradera nätaggregatet för kompatibilitet med seriella ATA-enheter.
LP4/SATA-strömkabeln är professionellt utformad och tillverkad av material av högsta kvalitet och täcks av StarTech.coms livstidsgaranti.
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 22,0 cm [8,7 in] |
Package Length | 0,7 mm [0,0 in] | |
Fraktvikt (förpackning) | 33,0 g [1,2 oz] | |
Package Width | 12,8 cm [5,0 in] | |
Hårdvara | Kabelmanteltyp | PVC - Polyvinyl Chloride |
Kontakt(er) | 1 - Connector A | LP4 (4-stift, Molex-type Large Drive Power) |
2 - Connector B | SATA-ström (15-stifts) | |
Utseende | Produkthöjd | 21,6 mm [0,9 in] |
Produktvikt | 25,0 g [0,9 oz] | |
Produktbredd | 24,6 mm [1,0 in] | |
Kabellängd | 30,5 cm [12,0 in] | |
Produktlängd | 30,5 cm [12,0 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 30 cm LP4 till 2x SATA ström Y-kabeladapter |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.