Produkt ID: PYO2LSATA
The PYO2LSATA 6" SATA Power Splitter Cable features a SATA 15-pin plug that connects to a single computer power supply SATA connector and breaks out into two latching SATA 15-pin receptacles, which enables you to connect two Serial ATA drives to a single SATA power connection on the computer power supply.
The latching SATA power connectors ensure a secured connection to the drives, preventing accidental disconnects, while the Y-adapter power split eliminates the cost of having to upgrade the power supply to accommodate an additional SATA drive.
Backed by our lifetime warranty, the PYO2LSATA is constructed of only top quality materials and designed for optimum performance and reliability.
|Förpackning||Package Height||8 mm [0,3 in]|
|Package Length||22,5 cm [8,9 in]|
|Fraktvikt (förpackning)||30 g [1,1 oz]|
|Package Width||12,5 cm [4,9 in]|
|Hårdvara||Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Kontakt(er)||1 - Connector A||SATA-ström (15-stifts)|
|2 - Connector B||SATA-ström (15-stifts)|
|Utseende||Produktvikt||25 g [0,9 oz]|
|Kabellängd||15,2 cm [6,0 in]|
|Produktlängd||15,2 cm [6,0 in]|
|Vad det är i lådan||1 - Ingår i paketet||6in Latching SATA Power Y Splitter Cable Adapter - M/F|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.