Produkt ID: PYO2SATA
PYO2SATA SATA-strömdelarkabeln har en SATA hane-strömkontakt som ansluter till en enda SATA-nätaggregatskabel och delas upp i två SATA hona-strömkontakter.
SATA-strömdelare/Y-kabeln överskrider antalet SATA-enheter som kan installeras i ett system baserat på tillgängliga PSU-strömanslutningar och du slipper kostnaden för att uppgradera nätaggregatet för att koppla in en extra SATA-enhet.
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 0,6 mm [0,0 in] |
Package Length | 12,8 cm [5,0 in] | |
Fraktvikt (förpackning) | 32,0 g [1,1 oz] | |
Package Width | 22,0 cm [8,6 in] | |
Förpackningsantal | 1 | |
Hårdvara | Kabelmanteltyp | PVC - Polyvinyl Chloride |
Kontakt(er) | 1 - Connector A | SATA-ström (15-stifts) |
2 - Connector B | SATA-ström (15-stifts) | |
Miljö | Drifttemperatur | 20°C to 80°C (68°F to 176°F) |
Förvaringstemperatur | 24°C to 25°C (75.2°F to 77°F) | |
Luftfuktighet | 40%-60% | |
Utseende | Produkthöjd | 0,0 mm [0,0 in] |
Produktvikt | 28,0 g [1,0 oz] | |
Produktbredd | 0,0 mm [0,0 in] | |
Kabellängd | 15,2 cm [6,0 in] | |
Produktlängd | 16,0 cm [6,3 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 15 cm SATA ström Y-splitterkabeladapter – M/F |
Förläng en SATA-strömanslutning med upp till 30 cm
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.