Produkt ID: SATA6
The SATA6 Serial ATA Cable features two 7-pin data receptacles and supports full SATA 3.0 bandwidth of up to 6Gbps when used with SATA 3.0 compliant drives.
Featuring a low profile, yet durable construction, the flexible design improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.
Constructed of only top quality materials and designed for optimum performance and reliability this 6" SATA cable is backed by our lifetime warranty.
|Förpackning||Fraktvikt (förpackning)||11,0 g [0,4 oz]|
|Package Length||12,8 cm [5,0 in]|
|Package Width||22,0 cm [8,6 in]|
|Package Height||0,6 mm [0,0 in]|
|Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Kontakt(er)||1 - Connector A||SATA (7 pin, Data)|
|1 - Connector B||SATA (7 pin, Data)|
|Miljö||Drifttemperatur||20°C to 80°C (68°F to 176°F)|
|Förvaringstemperatur||24°C to 25°C (75.2°F to 77°F)|
|Luftfuktighet||50% relative humidity|
|Prestanda||Typ och hastighet||SATA III (6 Gbps)|
|Utseende||Produktvikt||6,0 g [0,2 oz]|
|Produkthöjd||82,1 cm [32,3 in]|
|Produktbredd||2,0 cm [0,8 in]|
|Tråddimension||26 AWG (0.404 mm)|
|Kabellängd||152,4 mm [6,0 in]|
|Produktlängd||12,8 cm [5,0 in]|
|Vad det är i lådan||1 - Ingår i paketet||6in SATA Serial ATA Cable|
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.