0.3m SATA Extension Cable

Extend SATA Data Connections by up to 30cm (12in)

Produkt ID: SATAEXT30CM

  • Offers 30 centimeters (12in) in length for greater flexibility
  • Compliant with Serial ATA III Specifications
  • Supports data transfer rates up to 6 Gbps
Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT

The SATAEXT30CM 0.3-meter (30cm) SATA Data Extension Cable enables you to extend the reach between internal SATA drive connections by up to 30 cm (11.81 in).

The extension simplifies drive installation by overcoming typical connection limitations, and it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.

Constructed of only high quality materials and expertly designed for reliability and peak performance, the SATAEXT30CM cable is backed by StarTech.com's Lifetime Warranty.

Användning

  • Allows flexibility in cable placement when building or upgrading systems
  • Extend SATA Data connections with a cable long enough to make the necessary connection but short enough to prevent excess cable from creating unnecessary clutter
  • For use in servers and storage subsystems
  • Mini tower computers

Fördelarna med StarTech.com

  • Eliminates the need to bend or strain the cable to account for a lack of space
  • Backed by a StarTech.com lifetime warranty

Partnernummer

  • Ingram Micro Sweden V931963
  • UPC 065030846813

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 10 mm [0.4 in]
Package Length 16.8 cm [6.6 in]
Fraktvikt (förpackning) 16 g [0.6 oz]
Package Width 12.4 cm [4.9 in]
Förpackningsantal 1
Hårdvara Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er) 1 - Connector A SATA (7-stifts, data)
1 - Connector B SATA (7-stifts, data)
Prestanda Typ och hastighet SATA III (6 Gbps)
Utseende Produktvikt 10 g [0.4 oz]
Färg Röd
Tråddimension 26 AWG (0.404 mm)
Kabellängd 30 cm [11.8 in]
Produktlängd 30 cm [11.8 in]
Vad det är i lådan 1 - Ingår i paketet 30 cm SATA Data Extension Cable

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...