Produktsökning

6in 4 Pin LP4 to Right Angle SATA Power Cable Adapter

Power a Serial ATA hard drive from a conventional LP4 power supply connection

Produkt ID: SATAPOWADAPR

  • Provides 6 inches in cable length
  • Connects a Serial ATA Hard Drive to a standard internal power connector – SATA (15 pin) to 4 pin Molex (LP4)
  • Provide power to your Serial ATA hard drive through a standard Molex connection from your power supply
Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT

This 6-inch 4-Pin LP4 to Right Angle SATA power adapter features one 4-Pin LP4 male connector and one (female) right angle SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive.

This LP4 to Right Angle SATA adapter is backed by StarTech.com's Lifetime Warranty.

Användning

  • Ideal for desktop computers or servers that use Serial ATA Hard Drives

Fördelarna med StarTech.com

  • Compatible with both 2.5” and 3.5” Serial ATA Hard Drives Allows the use of newer hard drives with older power supplies
  • Right-angled connector allows this SATA cable to be used where normal straight connector cables cannot
  • Backed by a StarTech.com lifetime warranty and free technical support

Partnernummer

  • Ingram Micro Sweden V931228
  • UPC 065030841771

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 0,1 mm [0,0 in]
Package Length 22,5 cm [8,9 in]
Fraktvikt (förpackning) 17,0 g [0,6 oz]
Package Width 12,5 cm [4,9 in]
Förpackningsantal 1
Hårdvara Kabelmanteltyp PVC - Polyvinyl Chloride
Kontakt(er) 1 - Connector A LP4 (4-stift, Molex-type Large Drive Power)
1 - Connector B SATA-ström (15-stifts)
Utseende Produkthöjd 0,0 mm [0,0 in]
Produktvikt 11,5 g [0,4 oz]
Produktbredd 0,0 mm [0,0 in]
Kontakttyp Rak till högervinklad
Tråddimension 18 AWG
Kabellängd 15,2 cm [6,0 in]
Produktlängd 15,2 cm [6,0 in]
Vad det är i lådan 1 - Ingår i paketet 6 inch LP4 Male to SATA Power Adapter

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen