Produkt ID: SATAPOWADPL
SATAPOWADPL LP4 kontakt till 90 graders SATA-strömadapter har en hankontakt LP4 med 4 stift och en vänstervinklad, 90 graders SATA-strömkontakt (hona) som gör att du kan strömsätta en seriell ATA-hårddisk via en konventionell LP4-kontakt och slipper uppgradera datorns nätanslutning för att den ska bli kompatibel med SATA-hårddisken.
Den 90-gradiga (vänstervinklade) SATA-nätkontakten gör det enklare att ansluta en SATA-hårddisk i svåråtkomliga utrymmen och man slipper påfrestningar på både kontakten och kabeln.
Denna LP4 till SATA-adapter täcks av StarTech.coms livstidsgaranti
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 22,0 cm [8,7 in] |
Package Length | 0,7 mm [0,0 in] | |
Fraktvikt (förpackning) | 23,0 g [0,8 oz] | |
Package Width | 12,8 cm [5,0 in] | |
Förpackningsantal | 1 | |
Kontakt(er) | 1 - Connector A | LP4 (4 pin; Large Drive Power) |
1 - Connector B | SATA-ström (15-stifts) | |
Utseende | Produkthöjd | 21,6 mm [0,9 in] |
Produktvikt | 15,0 g [0,5 oz] | |
Produktbredd | 24,6 mm [1,0 in] | |
Kontakttyp | Vänstervinklad | |
Kabellängd | 15,2 cm [6,0 in] | |
Produktlängd | 15,2 cm [6,0 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 15 cm 4-stifts LP till vänstervinklad SATA-strömkabeladapter |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.