Produkt ID: SATAPOWEXT12
Med SATAPOWEXT12 SATA-förlängningsströmkabel (15 stift, 30 cm lång) kan du förlänga räckvidden mellan interna SATA- och enhetsströmanslutningar med upp till 30 cm.
Förlängningskabeln gör hårddiskinstallation lättare genom att man slipper typiska anslutningsbegränsningar och minskar risken för skador på enheten och moderkortets SATA-kontakter genom att man inte behöver dra eller pressa på kabeln när man ansluter den.
SATA-förlängningsströmkabeln täcks av StarTech.coms livstidsgaranti
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 8 mm [0,3 in] |
Package Length | 22,5 cm [8,9 in] | |
Fraktvikt (förpackning) | 28 g [1,0 oz] | |
Package Width | 12,5 cm [4,9 in] | |
Förpackningsantal | 1 | |
Kontakt(er) | 1 - Connector A | SATA-ström (15-stifts) |
1 - Connector B | SATA-ström (15-stifts) | |
Utseende | Produktvikt | 23 g [0,8 oz] |
Tråddimension | 18 AWG | |
Kabellängd | 30,5 cm [12,0 in] | |
Produktlängd | 30,5 cm [12,0 in] | |
Produktbredd | 25 mm [1,0 in] | |
Produkthöjd | 10 mm [0,4 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 30 cm 15 stifts SATA-strömförlängningskabel |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.