Produkt ID: SATAPOWEXT8
The SATAPOWEXT8 8-inch, 15-Pin SATA Power Extension Cable enables you to extend the reach between internal SATA power and drive connections by up to 8 inches.
The extension simplifies drive installation by overcoming typical connection limitations, and it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.
|Förpackning||Package Height||8 mm [0.3 in]|
|Package Length||22.5 cm [8.9 in]|
|Fraktvikt (förpackning)||22 g [0.8 oz]|
|Package Width||12.5 cm [4.9 in]|
|Hårdvara||Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Kontakt(er)||1 - Connector A||SATA-ström (15-stifts)|
|1 - Connector B||SATA-ström (15-stifts)|
|Utseende||Produktvikt||17 g [0.6 oz]|
|Kabellängd||20.3 cm [8.0 in]|
|Produktlängd||20.3 cm [8.0 in]|
|Produktbredd||30 mm [1.2 in]|
|Produkthöjd||8 mm [0.3 in]|
|Vad det är i lådan||1 - Ingår i paketet||8in 15 Pin SATA Power Extension Cable|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.