Produkt ID: SLSATAF36
SLSATAF36 LP4-strömkabel (91 cm) för anslutning mellan slimline SATA och SATA har en SATA-datakontakt och en LP4 strömanslutning i ena änden och en slimline seriell ATA-kontakt i den andra. Den gör det möjligt att ansluta en slimline SATA-enhet till ett moderkort som inte har en ledig slimline-kontakt.
Denna innovativa kabeladapter har stöd för full SATA 3.0-bandbredd på upp till 6 Gbps vid användning med SATA 3.0-kompatibla enheter och ger dig de anslutningar som du behöver för att enkelt göra överföringar till enheter utrustade med slimline SATA.
SLSATAF36 är tillverkad av material av högsta kvalitet och utformad för optimal prestanda och pålitlighet och täcks av vår livstidsgaranti.
Warranty Information | Warranty | Lifetime |
---|---|---|
Förpackning | Package Height | 28 mm [1,1 in] |
Package Length | 22,5 cm [8,9 in] | |
Fraktvikt (förpackning) | 37 g [1,3 oz] | |
Package Width | 12,5 cm [4,9 in] | |
Hårdvara | Kabelmanteltyp | PVC - Polyvinyl Chloride |
Kontakt(er) | 1 - Connector A | Slimline SATA (13-stifts, data & ström) |
1 - Connector B | LP4 (4-stift, Molex-type Large Drive Power) | |
SATA (7-stifts, data) | ||
Prestanda | Typ och hastighet | SATA III (6 Gbps) |
Utseende | Produktvikt | 32 g [1,1 oz] |
Färg | Röd | |
Kabellängd | 91,4 cm [36,0 in] | |
Produktlängd | 91,4 cm [36,0 in] | |
Produktbredd | 7,8 mm [0,3 in] | |
Produkthöjd | 91,5 cm [36,0 in] | |
Vad det är i lådan | 1 - Ingår i paketet | 36in Slim SATA to SATA & LP4 cable |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
SATA cable
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.