Utgått

6in Coax High Resolution VGA Port Saver Cable - HD15 M/F

Protect a Video card or monitor's VGA interface from damage and wear

Produkt ID: VGAEXTAA6IN

  • Molded connectors with strain relief

The VGAEXTAA6IN 6-inch VGA Port Saver Cable/coupler avoids expensive repairs to a computer or display. It does this by extending the port by 6in, thereby eliminating the weight and stress that would typically be placed on the port by a VGA cable. This is especially useful in an environment where cables are unplugged and re-inserted frequently.

Användning

  • Extend a VGA interface by 6in
  • Protect the video card or monitor's VGA port from wear and tear caused by frequent connect/disconnects

Fördelarna med StarTech.com

  • Prevents repairs to your computer or display by extending the port to eliminate the stress that would be placed on the port by a VGA cable

Partnernummer

  • UPC 065030840668

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Length 12,5 cm [4,9 in]
Package Width 1,9 cm [0,7 in]
Package Height 215 mm [8,5 in]
Fraktvikt (förpackning) 0,1 kg [0,2 lb]
Hårdvara Kontaktplätering Nickel
Kabelmanteltyp PVC - Polyvinyl Chloride
Brandteknisk klass CMG-klass (General Purpose)
Kontakt(er) Connector A 1 - VGA (15-stifts, High Density D-Sub)
Connector B 1 - VGA (15-stifts, High Density D-Sub)
Utseende Färg Svart
Tråddimension 28 AWG
Kabellängd 152,4 mm [6,0 in]
Produktvikt 90 g [3,2 oz]
Vad det är i lådan Ingår i paketet 1 - 6in Coax High Resolution VGA Port Saver Cable

Tillbehör

MXT101MMHQ1

1 ft Coax High Resolution Monitor VGA Video Cable - HD15 to HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
MXT101MMHQ

1,8 m koaxialvideokabel för VGA-skärm med hög upplösning - HD15 till HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ20

6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a VGA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video destination

To test your setup components, try the following:

  • Use the video cables, source, and destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

There are several issues that could be causing you to experience an issue with the color on your VGA display when you use a StarTech.com VGA cable. Issues with the color include an image that is a solid color or is missing colors (typically red, green, or blue).

To prevent issues, make sure that the following is true: 

  • The cable is tightly screwed into each of the ports.

  • The female connectors/ports are free of debris or anything that may prevent electrical conductivity.

  • No pins are bent or missing in male VGA connectors/ports.

Note: VGA cables come in 14-pin and 15-pin variants. For more information about VGA cables, refer to the following FAQs:

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen