Produktsökning

Industrial RS232 to RS422/485 Serial Port Converter with 15KV ESD Protection

Convert an RS232 data signal to either RS485 or RS422 with this wall-mountable, ESD-protected adapter

Produkt ID: IC232485S

  • RS232 to 2/4-wire RS485 or RS422 conversion
  • Supports RS422 and RS485 auto detect and manual switching
  • ±15KV ESD protection on all signal pins
Ditt pris
€122,99 EUR excl. VAT
€153,74 EUR incl. VAT

The IC232485S Industrial RS232 to RS-422/485 Serial Converter is a bi-directional adapter that lets you adapt an RS232 data signal to either RS485 (2 or 4-wire) or RS422 and vice-versa, with support for baud rates up to 921.6 Kbps.

Ideal for industrial environments, the serial port converter provides 15KV ESD protection on all signal pins to protect costly and often sensitive control equipment against electrical damage. The serial converter also features a sturdy wall-mountable metal housing with Power, Tx and Rx LED indicators for simple status monitoring.

The adapter supports auto baud rate detection as well as RS-422 and RS485 mode detection, with an integrated dip switch for manual mode selection if needed, and supports connection distances of up to 4000ft (1200m).

Backed by a 2-year StarTech.com warranty and free lifetime technical support.

Användning

  • Adapt and connect a scale, meter, scanner or one of several other control peripherals to a computer system with only RS232
  • Monitor or control RS-422/485 serial devices like PLCs and other industrial equipment

Fördelarna med StarTech.com

  • Protect sensitive industrial equipment with integrated ESD protection
  • Communicate efficiently with connected devices through high-speed 921Kbps support
  • Suitable for industrial environments with a rugged, wall-mountable enclosure

Partnernummer

  • Ingram Micro Sweden V932905
  • UPC 065030852555

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 41 mm [1,6 in]
Package Length 14,6 cm [5,7 in]
Fraktvikt (förpackning) 351 g [12,4 oz]
Package Width 20,8 cm [8,2 in]
Hårdvara Portar 2
Gränssnitt Seriell
Porttyp Kabeladaptrar
Indikatorer 1 - LED-indikatorer Power (Green)
Rx (Yellow)
Tx (Yellow)
Kontakt(er) 1 - Kontakttyp(er) DB-9 (9-stifts, D-Sub)
DB-9 (9-stifts, D-Sub)
Miljö Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 5~85% RH
Prestanda Maximal kabellängd 1200 m [3936,0 ft]
Seriellt protokoll RS-232/422/485
Maximal överföringshastighet 921,6 kbps
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.5 A
Utspänning 5 DC
Utström 1 A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 5
Utseende Produktvikt 143 g [5,0 oz]
Färg Svart
Kabinettyp Stål
Produktlängd 11,7 cm [4,6 in]
Produktbredd 59 mm [2,3 in]
Produkthöjd 22 mm [0,9 in]
Vad det är i lådan 1 - Ingår i paketet RS-232 to RS-422/485 Converter
Universal Power Adapter (NA/EU/UK)
Instruction Manual

Tillbehör

SVA5M3NEUA

DC-strömadapter - 5 V, 3 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen