USB till seriell adapterhubb med 16 portar

Konvertera en USB-port till 16 seriella RS232-portar i ett industriellt hyllmonterbart chassi - och kedjekoppla flera hubbar för en skalbar lösning

Produkt ID: ICUSB23216FD

  • Få 16 seriella RS232-portar genom en enda USB-port
  • Koppla ihop flera hubbar genom kedjekoppling
  • Överföringshastighet på 921,6 kbps per port
Ditt pris
€606,99 EUR excl. VAT
€758,74 EUR incl. VAT

Här är ett enkelt och kostnadseffektivt sätt att lägga till seriell RS232-förmåga till din industrimiljö. Denna USB till seriell adapterhubb med 16 portar har ett kraftigt, hyllmonterbart chassi och stöder kedjekoppling så att du kan koppla ihop flera hubbar för att öka antalet seriella enhetsportar.

En skalbar lösning för förändrade behov

Med denna hyllmonterbara seriella USB-hubb (FTDI) kan du lägga till 16 seriella portar (RS232), med full kontroll från din stationära eller bärbara dator med hjälp av en enda USB-port. Kedjekopplingsfunktionen ger dig ett kostnadseffektivt och skalbart sätt att öka antalet seriella portar och växer tillsammans med dina behov utan att du behöver investera i en dyrare seriell hubb.

Den seriella USB-hubben ger dig full kontroll över dina seriella komponenter från en enda enhet och är idealisk för många applikationer, inklusive: industriell automation, automatiska kiosker med självbetjäning och övervakning av kameror och säkerhetssystem.

Inbyggd behändighet

Hubben har COM-portbevaring som bevarar de tilldelade värdena på seriella COM-portar. Detta ser till att samma värden automatiskt tilldelas porten på adaptern igen om den skulle kopplas från och återanslutas till värddatorn.

Hubben har ett tillförlitligt FTDI USB till seriellt chipset som ger enkel installation i många olika operativsystem.

Möter kraven i industrimiljöer

Med sitt chassi helt i metall passar denna tåliga och hyllmonterbara hubb i standardhyllor på 19" för serverförvaring för att ge en effektiv, industriell och seriell lösning. Den stöder ett utökat intervall för driftstemperatur på -40°C till 85°C för att garantera tillförlitlig prestanda även i de tuffaste miljöerna. Den seriella USB-hubben har både en AC-adapter och ström via uttagsplint för mångsidiga strömalternativ.

ICUSB23216FD täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Idealisk för industriell automation på fabriks- och tillverkningsgolv
  • Ger full kontroll över dina seriella komponenter i serverrummet från en enda enhet
  • Kontrollera och övervaka övervaknings- och säkerhetskameror och -system
  • Automater och kiosker med självbetjäning (mataffärer, flygplatser) för att kontrollera seriella enheter som vågar, pekskärmar, magnetiska kortläsare, streckkodsskannrar, kvittoskrivare, etikettskrivare
  • POS-kontroll av tangentbord, kassalådor, kvittoskrivare, kortläsare och magnetremseläsare, vågar och upphöjda skärmar på stolpar
  • Bankkassor i antingen helprofil eller lågprofil för att kontrollera seriella enheter som kassalådor, kortläsare och magnetremseläsare, skrivare, knappsatser, pennplattor

Partnernummer

  • Ingram Micro Sweden V933735
  • UPC 065030864763

Kompatibilitet

  • Windows 8 logo
  • Linux logo
  • Windows 7 logo
  • Windows Server 2012 logo
  • Windows 10 logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • Windows Server 2019 logo
  • macOS High Sierra (10.13) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows®; CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
macOS 10.6 till 10.15
Linux Kernel 3.0.x till 5.4.x (Endast LTS-Versioner)

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 61 mm [2,4 in]
Package Length 45,1 cm [17,8 in]
Fraktvikt (förpackning) 2,3 kg [5,1 lb]
Package Width 21,5 cm [8,5 in]
Hårdvara Portar 16
Gränssnitt Seriell
Busstyp USB 2.0
Porttyp Extern hubb
Chipset-ID FTDI - FT232RL
Indikatorer 16 - LED-indikatorer Datamottagning
Datasändning
Kontakt(er) 16 - Kontakttyp(er) DB-9 (9-stifts, D-Sub)
1 - Kontakttyp(er) USB B (4-stifts)
Miljö Drifttemperatur -40°C to 85°C (-40°F to 185°F)
Förvaringstemperatur -65°C to 150°C (-85°F to 302°F)
Luftfuktighet 20~80% RH (Non-condensing)
Mjukvara OS-kompatibilitet Windows®; CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
macOS 10.6 till 10.15
Linux Kernel 3.0.x till 5.4.x (Endast LTS-Versioner)
Prestanda Maximal dataöverföringshastighet 480 Mbps
Seriellt protokoll RS-232
Maximal överföringshastighet 921,6 kbps
Databitar 7, 8
FIFO 256 Bytes
Paritet Odd, Even, Mark, Space, None
Stoppbitar 1, 2
Medeltid mellan fel (MTBF) 49,337 hours
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 1.5 A
Utspänning 12V DC
Utström 3 A
Polaritet på mittpol Positiv
Kontakttyp N
Strömförbrukning 36
Utseende Färg Svart
Kabinettyp Stål
Produktlängd 43 cm [16,9 in]
Produktbredd 12 cm [4,7 in]
Produkthöjd 45 mm [1,8 in]
Produktvikt 1,6 kg [3,4 lb]
Vad det är i lådan 1 - Ingår i paketet USB 3.0 till RS232-hubb med 16 portar
USB-kabel
2 - Ingår i paketet fästen för hyllmontering
8 - Ingår i paketet skruvar för hyllmontering
2 - Ingår i paketet Monteringsfästen för DIN rail
4 - Ingår i paketet Monteringsskruvar för DIN rail
Brickor
Muttrar
1 - Ingår i paketet Universell strömadapter (NA/JP, EU, UK, ANZ)
Drivrutin CD
kontakt för uttagsplint
snabbstartsguide

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Problemsökning

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...