Produkt ID: PCI1S950DV
The PCI1S950DV 1 Port PCI RS232 Serial Adapter Card w/ 16950 UART - Dual Voltage offers a high performance 16950 UART channel/port for connecting any new or legacy serial peripheral, with data transfer rates of up to 460Kbps.
A cost-effective solution for connecting serial modems, POS devices, printers, ISDN terminal adapters and more, and offers dual voltage support, allowing you to use a PCI (5V) or PCI-X (3.3V) slot for installation.
A versatile solution, the PCI Serial card supports several current and legacy versions of Windows®, plus IRQ sharing and a PCI plug and play interface to guarantee convenient, hassle-free serial device connections. Suitable for installation in standard or small form factor PC cases, the PCI serial card includes an optional low profile/half-height bracket for easy installation.
Backed by a StarTech.com Lifetime Warranty and free lifetime technical support.
|Förpackning||Package Length||14,8 cm [5,8 in]|
|Package Width||58 mm [2,3 in]|
|Package Height||19,5 cm [7,7 in]|
|Fraktvikt (förpackning)||0,2 kg [0,3 lb]|
|Busstyp||PCI / PCI-X (5 / 3.3V)|
|Korttyp||Standardprofil (inkl. LP-fäste)|
|Porttyp||Inbyggd på kort|
|Chipset-ID||PLX/Oxford - OX16PCI952|
|Kontakt(er)||1 - Kontakttyp(er)||PCI/PCI-X (universell 3,3 & 5 V, 32-bitars)|
|1 - Externa portar||DB-9 (9-stifts, D-Sub)|
|Miljö||Drifttemperatur||-10°C to 80°C (14°F to 176°F)|
|Förvaringstemperatur||-20°C to 100°C (-4°F to 212°F)|
|Mjukvara||OS-kompatibilitet||Windows® 95, 98SE, ME, 2000, XP, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012
Linux 2.6.x to 4.4.x LTS Version only
|Prestanda||Maximal dataöverföringshastighet||460Kbps (Note: Crystal will need to be adjusted to achieve 460Kbps)|
|Utseende||Produktlängd||12 cm [4,7 in]|
|Produktbredd||20 mm [0,8 in]|
|Produkthöjd||12 cm [4,7 in]|
|Produktvikt||60 g [2,1 oz]|
|Vad det är i lådan||1 - Ingår i paketet||PCI / PCI-X Serial Card|
|Low Profile Bracket|
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, click Start. Right-click Computer, and then click Properties.
Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file. Click OK, and then click Next.
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If you do not see the COM port number in Device Manager see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Yes. This PCI card uses a universal connector keyed for both 3.3V and 5V that can be used with PCI and PCI-X. This type of connector is identified as having 2 separate notches, instead of just one.