Utgått

PCI Express RS232 seriell-kortadapter med lågprofil, 8 portar och 161050 UART

Lägg till 8 RS-232 serieportar till datorn genom en enda PCI Express-utbyggnadskortplats i lågprofil

Produkt ID: PEX8S1052

  • RS232-kort med 8 portar
  • Seriell dataöverföringshastighet på upp till 460,8 kbps
  • 256 byte FIFO per sändare och mottagare

Den PEX8S1052 RS232 seriella kortadaptern med 8 portar och 161050 UART för PCI express i lågprofil låter dig lägga till 8 RS232 serieportar till datorn genom en enda PCI express-kortplats i lågprofil.

Serieportskortet för PCI express stöder datahastigheter på upp till 460,8 kbps och har en högpresterande 16C1050 UART och en stor 256-byte FIFO-buffer för transit/mottagning som arbetar tillsammans för att ge seriell kommunikation i hög hastighet och reducera CPU:ns belastning.

Det seriella kortet med 8 portar passar nästan alla chassin och har en design i lågprofil/halvhöjd och ett valfritt fäste i helhöjd. Den medföljande breakout-kabeln använder en enda kontakt på kortet för att ge 8 portar vilket undviker trånga anslutningar som kan förekomma vid fixerade/statiska portar.

Täcks av StarTech.coms livstidsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Övervaka och kontrollera industriella maskiner vid monteringsband eller i produktionsmiljö
  • POS-användning i livsmedelsbutiker och andra butiker för att kontrollera tangentbord, kassalådor, kvittoskrivare, kortläsare/magnetremseläsare, vågar och upphöjda skyltar och stolpar
  • Bankkassor i antingen helprofil eller lågprofil för att kontrollera seriella enheter så som kassalådor, kortläsare/magnetremseläsare, skrivare, knappsatser, pennplattor
  • Automater och kiosker för att kontrollera serieenheter så som vågar, pekskärmar, magnetiska kortläsare, streckkodsskannrar, kvittoskrivare, etikettskrivare

Fördelarna med StarTech.com

  • Breakout-kabeln använder en enda PCIe-kortplats för att lägga till 8 serieportar
  • Medföljande fästen i låg- och helprofil passar i nästan alla chassin

Partnernummer

  • UPC 065030850803

Kompatibilitet

  • Windows 7 logo
  • Windows 8 logo
  • Windows Server 2012 logo
  • Windows 10 logo
  • Windows Server 2016 logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 50 mm [2,0 in]
Package Length 21,2 cm [8,3 in]
Package Width 14,5 cm [5,7 in]
Fraktvikt (förpackning) 551 g [19,5 oz]
Hårdvara Portar 8
Gränssnitt Seriell
Busstyp PCI Express
Korttyp Lågprofil (SP-fästen ingår)
Porttyp Dongel (medföljer)
Chipset-ID SystemBase - SB16C1052PCI
Kontakt(er) 1 - Kontakttyp(er) PCI Express x1
8 - Externa portar DB-9 (9-stifts, D-Sub)
Miljö Drifttemperatur 0°C to 100°C (32°F to 212°F)
Förvaringstemperatur -65°C to 150°C (-85°F to 302°F)
Luftfuktighet 20~80% RH
Mjukvara OS-kompatibilitet Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Prestanda Seriellt protokoll RS-232
Maximal överföringshastighet 460.8 kbps
Databitar 5, 6, 7, 8
FIFO 256 Bytes
Flödeskontroll Ingen, Xon/Xoff, RTS/CTS
Paritet None, Odd, Even
Stoppbitar 1, 1.5, 2
Särskilda anmärkningar/krav System- och kabelkrav Tillgänglig PCI express-kortplats
Utseende Produktlängd 17,5 cm [6,9 in]
Produktbredd 18 mm [0,7 in]
Produkthöjd 69 mm [2,7 in]
Produktvikt 66 g [2,3 oz]
Vad det är i lådan 1 - Ingår i paketet RS232-kort med 8 portar
Breakout-kabel
Standardprofilfäste
Drivrutin CD
Instruktionsbok

Tillbehör

MXT100

1,8 m standard seriell kabel - DB9 M/F

Förläng din EGA-bildskärmskabel eller muskabel med 1,8 meter

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MXT10010

10 ft Straight Through Serial Cable - M/F

Extend your EGA monitor cable or mouse cable by 10ft

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
SCNM9FF

3 m DB9 RS232 seriell nollmodemskabel F/F

Överför filer via en seriell anslutning

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Before you install this device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Downloads. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be trying to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.
  2. After your computer restarts, connect the fax modem to your computer.

Your computer automatically finishes installing the driver and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Downloads. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer automatically finishes installing the driver and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the Windows folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the sbserial.inf file. Click OK, and then click Next. Additional device listings will appear in Device Manager.
  2. Complete steps 4 to 11 for each of the new device listings.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Windows folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the sbserial.inf file. Click OK, and then click Next. Additional device listings will appear in Device Manager.
  2. Complete steps 4 to 12 for each of the new device listings.

Problemsökning

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen