SATA 6 Gbps PCI Express SATA-kontrollerkort med 2 portar

Lägg till två SATA 6 Gbps-portar för höghastighetsåtkomst till stora interna lagringslösningar

Produkt ID: PEXSAT32

  • Stödjer SATA Rev 3.0-överföringshastigheter på upp till 6,0 Gbps och är bakåtkompatibel med SATA I/II vid 1,5/3,0 Gbps
  • Med stöd för portmultiplicering samt FIS-baserad och kommandobaserad växling
  • Stödjer RAID 0- och 1-lägen
Ditt pris
€48,99 EUR excl. VAT
€61,24 EUR incl. VAT

Kontrollerkortet PEXSAT32 PCI Express SATA 6 Gbps (SATA 3.0) med 2 portar ger enkel anslutningsbarhet mellan en värddator och SATA 3.0-enheter – en kostnadseffektiv lösning för att ansluta höghastighetslagring som High rpm-hårddiskar och sollid state-hårddiskar (SSD), vilket i sin tur gör det lättare att säkerhetskopiera och arkivera data.

Adapterkortet har fullt stöd för SATA 3.0-hårddiskar och överföringshastigheter på upp till 6 Gbps samt ett ursprungligt PCI Express-chipset som ger förbättrad kompatibilitet, pålitlighet och prestanda för externa SATA 600 MB/s-lagringsbehov.

Kontrollerkortet är bakåtkompatibelt med SATA 2.0-enheter, vilket gör det mångsidigt så att det kan användas med äldre lagringsenheter. Det stödjer RAID 0- och 1-lägen så väl som portmultiplicering med kommandobaserad och FIS-baserad växling för att ansluta flera olika externa hårddiskar till en värddator via en enda SATA-anslutning.

En dubbel profillösning, SATA 3.0-kontrollerkortet har ett lågprofils-/halvhöjdsfäste för installation i kompakta datorchassin eller datorchassin med liten formfaktor.

Användning

  • Lägg till två interna SATA 6 Gbps-portar för att kunna lägga till SATA-revision 3.0-hårddiskar (6 Gbps)
  • Intern SATA-lagringslösning med hög prestanda
  • Multimediaströmning eller videoredigering
  • Perfekt lösning för RAID-lagring med flera enheter

Fördelarna med StarTech.com

  • Dubbelt så snabbt som SATA II (3 Gbps)
  • Levereras med monteringsfästen för helprofil, lågprofilsfästen medföljer

Partnernummer

  • Ingram Micro Sweden V931056
  • ALSO Sweden 000000000002763880
  • UPC 065030838955

Kompatibilitet

  • Windows 8 logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows 10 logo
  • macOS Sierra (10.12) logo
  • Windows Server 2016 logo
  • macOS High Sierra (10.13) logo
  • macOS Mojave (10.14) logo
  • Windows Server 2019 logo
  • Windows Server 2019 logo
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.6 till 10.14
Linux 3.5.x till 4.11.x Endast LTS-versioner
Obs: Anslutna enheter kan inte användas som system/primär enhet i Windows Server 2012, 2012 R2, 2016

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 32 mm [1,3 in]
Package Length 17,5 cm [6,9 in]
Fraktvikt (förpackning) 0,1 kg [0,3 lb]
Package Width 14,5 cm [5,7 in]
Hårdvara Portar 2
Gränssnitt SATA
Busstyp PCI Express
Korttyp Standardprofil (inkl. LP-fäste)
Chipset-ID Marvell - 88SE9128
Kontakt(er) Kontakttyp(er) 1 - PCI Express x1
Interna portar 2 - SATA (7-stifts, data)
Miljö Drifttemperatur 5°C to 50°C (41°F to 122°F)
Förvaringstemperatur -25°C to 70°C (-13°F to 158°F)
Luftfuktighet 15~90% RH
Mjukvara OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.6 till 10.14
Linux 3.5.x till 4.11.x Endast LTS-versioner
Obs: Anslutna enheter kan inte användas som system/primär enhet i Windows Server 2012, 2012 R2, 2016
Microsoft WHQL-certifierad Ja
Prestanda Maximal dataöverföringshastighet 6 Gbps
Typ och hastighet SATA III (6 Gbps)
Port Multiplier Ja
Number of Ports That Support Port Multiplier 2 (can only use 1 PM at a time)
Number of Drives Supported Through Port Multiplier 1 to 5
Bootable Ja
RAID Ja
RAID-lägen som stöds RAID 0 (stripade enheter)
RAID 1 (speglade enheter)
ATAPI Support Ja
RAID-lägen som stöds JBOD - (Just a Bunch of Disks)
Särskilda anmärkningar/krav Obs. Kortets maximala datagenomströmning begränsas av bussens gränssnitt. Om det används med PCI Express generation 1.0-datorer är maxgenomströmningen 2.5 Gbps. Om det används med PCI Express generation 2.0-datorer är maxgenomströmningen 5 Gbps.

Endast en port kan använda port-multipliceringsfunktionen åt gången.

Port Multiplier stöds ej av Mac OS®️
Larmfunktionen stöds ej i MSU-program.
Marvell Storage Utility-applikationen kräver macOS 10.9 till 10.14.
Utseende Produktvikt 33 g [1,2 oz]
Produktlängd 6,8 cm [2,7 in]
Produktbredd 64,5 mm [2,5 in]
Produkthöjd 2,1 cm [0,8 in]
Vad det är i lådan Ingår i paketet 1 - SATA 6 Gbps PCI Express-kort
1 - Lågprofilsfäste
1 - Drivrutin CD
1 - Instruktionsbok

Tillbehör

LSATA12

30 cm SATA-kabel med lås

SATA-kontakter med lås, för säkert fastsatta hårddiskinstallationer.

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
LSATA18

45 cm SATA-kabel med lås

SATA-hårddiskkabel med låsbara SATA-kontakter, ger hårddiskinstallationer som sitter säkert.

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
LSATA24

24in Latching SATA Cable

SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
SATA18

45 cm SATA seriell ATA-kabel

Denna högkvalitativa SATA-kabel är framtagen för att kunna ansluta SATA-enheter även i trånga utrymmen.

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
SATA24

60 cm SATA seriell ATA-kabel

Denna högkvalitativa SATA-kabel är framtagen för att kunna ansluta SATA-enheter även i trånga utrymmen.

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
SATA36

36in SATA Serial ATA Cable

Connect and position SATA drives easily - designed for larger cases

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Inbyggd programvara

Manual(er):

Mjukvara

  • marvell_msu_linux.zip
    • Version: 4.1.0.2031
      RedHat Enterprise 6.0
      Redhat Enterprise 5.4 SUSE
      Linux Enterprise 11SP1
    • Språk: EN

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.

Du bör inte uppgradera enhetens inbyggda programvara om du inte har några problem med enhetens funktioner. Du behöver bara uppgradera om du har problem med enheten och är säker på att problemet är den inbyggda programvaran.  Du kan bekräfta detta genom att läsa igenom den medföljande dokumentationen eller kontakta vår tekniska avdelning. Felaktig uppgradering av inbyggd programvara kan resultera i minskade prestanda så vi rekommenderar att du kontaktar StarTech.com först.

In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller.

If a RAID controller has failed, you should get the exact same model of RAID controller.  

Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives.

Rebuild a RAID array

With the following RAID modes, recovery is possible using the same StarTech.com product. Refer to the following table for the appropriate method to use to recover your RAID array.

RAID mode Max # of failed drives Procedure
RAID 1 Only one drive is needed for recovery.
  1. Determine which drive is operational by using the RAID management utility (if available) or test each drive individually on a different hard drive controller (for example, a hard drive docking station or SATA controller).

  2. Replace the failed drive with an identical hard drive.

The array will rebuild and is accessible during the rebuilding process.

RAID 3 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 5 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 10 Only one drive in a mirrored set can fail.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

 

Installation

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in step 2.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen