2-ports USB PCIe-kort - 10 Gbps USB 3.1 Gen 2 Type-A PCI Express värdkontrollkort - USB 3.2 Gen 2x1 PCIe kortadaptertillägg - expansionskort

Lägg till två USB Type-A-portar på 10 Gbps till din dator genom en PCI Express-port

Produkt ID: PEXUSB312A2

  • För över filer och få åtkomst till USB 3.1-enheter snabbare med genomströmning på upp till 10 Gbps
  • Valfri SATA-strömkontakt ger upp till 900 mA per USB-port
  • Kostnadseffektiv bakåtkompatibilitet
Ditt pris
€48,99 EUR excl. VAT
€61,24 EUR incl. VAT

Med detta USB 3.1-kort kan du lägga till två USB Type-A-portar till din dator genom en PCI Express-port. Med den kan du uppgradera ditt befintliga system genom att lägga till två USB 3.1 Gen 2-portar till din dator och ge dig åtkomst till dataöverföringshastigheter på upp till 10 Gbps.

Snabbare USB-prestanda

Genom att lägga till USB-portar på 10 Gbps till din dator kan du utnyttja hastigheten från USB 3.1 Gen 2 och vara säker på att du är redo för både nuvarande och framtida USB-A-enheter med hög bandbredd.

Med sitt stöd för högre datagenomströmning är detta PCI Express USB 3.1-kort en nödvändighet för externa hårddiskar, External Drive Enclosures och många andra USB 3.1-tillägg. Dessutom har USB-kortet en valfri SATA-strömkontakt som ansluts till nätaggregatet och ger upp till 900 mA per port till bussdrivna USB 3.1-enheter (500 mA för USB 2.0). Kortet är idealiskt för användning med stora externa lagringslösningar.

Kompatibel med äldre USB-enheter

Att ansluta äldre tillägg är inga problem. Detta mångsidiga USB 3.1-kort med dubbla portar är bakåtkompatibelt med äldre USB 3.0/2.0-enheter som använder vanlig USB Type-A-port, så att du kan eliminera den extra kostnaden och frustrationen av att köpa nya enheter.

Enkel installering

USB 3.1 PCIe-kortet är kompatibelt med ett brett utbud av Windows®- och Linux®-operativsystem. Dessutom medföljer fästen i både standardprofil och lågprofil för att enkelt installeras i datorer och servrar med full eller liten formfaktor.

PEXUSB312A2 täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Uppgradera en äldre PCIe-utrustad stationär dator från USB 3.0/2.0 till USB 3.1 Gen 2 (10 Gbps)
  • Ge ditt system fler USB-möjligheter med två extra USB-portar eller installera kortet som en vital hårdvarukomponent när du bygger en ny PC
  • Idealisk för att säkerhetskopiera filer, redigera video och återställa data med hjälp av externa USB 3.1 Gen 2-lagringslösningar med hög bandbredd

Partnernummer

  • UPC 065030871167

Kompatibilitet

  • Linux logo
  • Windows 8 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows 11 logo
  • Windows Server 2012 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
Windows® 7, 8, 8.1, 10, 11
Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019
Linux® 3.5 to 4.11.x LTS version only

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Fraktvikt (förpackning) 124,0 g [4,4 oz]
Package Length 17,2 cm [6,8 in]
Package Width 14,2 cm [5,6 in]
Package Height 30,0 mm [1,2 in]
Hårdvara Portar 2
Gränssnitt USB 3.1 Gen 2
Busstyp PCI Express
Korttyp Standard Profile (LP bracket incl.)
Porttyp Integrated on Card
Industristandarder USB 3.1 Specification Rev. 1.0
USB Specification Rev. 2.0
PCI Express Base Specification Rev. 3.0
Intel xHCI Specification Rev. 1.1
UASP (USB Attached SCSI Protocol) Rev. 1.0
Chipset-ID ASMedia - ASM2142
Kontakt(er) 1 - Kontakttyp(er) PCI Express x4
1 - Interna portar SATA Power (15 pin)
2 - Externa portar USB 3.1 USB Type-A (9 pin, Gen 2, 10 Gbps)
Miljö Drifttemperatur 5°C to 50°C (41°F to 122°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 20~80% RH
Mjukvara OS-kompatibilitet Windows® 7, 8, 8.1, 10, 11
Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019
Linux® 3.5 to 4.11.x LTS version only
Prestanda Maximal dataöverföringshastighet 10 Gbps
Typ och hastighet USB 3.1 Gen 2 - 10 Gbit/s
UASP-stöd Yes
Särskilda anmärkningar/krav System- och kabelkrav PCI Express-kapabel dator eller server med en PCI Express x4-port eller högre (x8, x16)
Valfri SATA-strömkontakt
Obs. Kortets maximala datagenomströmning begränsas av bussens gränssnitt. Maximal genomströmning hos PCI Express Gen 1.0 är 2,5 Gbps. Maximal genomströmning hos PCI Express Gen 2.0 är 5 Gbps. Maximal genomströmning hos PCI Express Gen 3.0 är 10 Gbps.
Utseende Produktlängd 95,0 mm [3,7 in]
Produktbredd 12,0 mm [0,5 in]
Produkthöjd 7,0 cm [2,8 in]
Produktvikt 50,0 g [1,8 oz]
Vad det är i lådan 1 - Ingår i paketet USB 3.1-kort
Fäste i lågprofil
snabbstartsguide

Tillbehör

USB31AC1M

1 m USB till USB-C-kabel - M/M

USB-A till USB-C™-kabel | USB-IF-certifierad | USB 3.1 (10 Gbps)

Ditt pris
€15,99 EUR excl. VAT
€19,99 EUR incl. VAT
SATAPOWADAP

15 cm 4-stifts LP4 till SATA-strömkabeladapter

Strömförsörj en seriell ATA-hårddisk från en konventionell strömkälla med LP4-anslutning

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external devices and transfer data at 10x the speed of USB 2.0

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
S251BPU313

Verktygslöst USB 3.1-kabinett (10 Gbps) för 2,5" SATA-enheter

Få högre hastighet med USB 3.1 Gen 2 i en lätt och bärbar lösning

Ditt pris
€39,99 EUR excl. VAT
€49,99 EUR incl. VAT
S351BU313

USB 3.1-kabinett (10 Gbps) för 3,5" SATA-enheter

Lösningen för datalagring med hög hastighet och hög kapacitet som du har väntat på - med USB 3.1 Gen 2

Ditt pris
€81,99 EUR excl. VAT
€102,49 EUR incl. VAT
S251BMU313

USB 3.1-kabinett (10 Gbps) för 2,5" SATA-enheter

Gör dig redo för supersnabb USB 3.1 Gen 2-datalagring med din 2,5" SSD eller HDD

Ditt pris
€47,99 EUR excl. VAT
€59,99 EUR incl. VAT
USB3AUB2MS

Slim Micro USB 3.0 kabel – 2 m

Placera enkelt dina Micro USB 3.0-enheter nära din stationära eller bärbara dator, med en tunn och flexiblare kabel

Ditt pris
€17,99 EUR excl. VAT
€22,49 EUR incl. VAT
ST7300USB3B

USB 3.0-hubb med 7 portar - stationär

Lägg till 7 externa USB 3.0-portar till en dator från en enda USB-anslutning

Ditt pris
€81,99 EUR excl. VAT
€102,49 EUR incl. VAT
ST7300U3M

USB 3.0-hubb med 7 portar – skrivbords- eller väggmonterbart metallkabinett

Anslut 7 högpresterande enheter till din dator eller Mac med denna kompakta och tåliga hubb

Ditt pris
€96,99 EUR excl. VAT
€121,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your device should be ready to use.

Problemsökning

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

When you troubleshoot issues with a USB controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB cables

  • USB devices

  • USB controller card

To test your setup components, try the following:

  • Use the USB cable, device, and controller card in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, device, and controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the USB device and controller card, it is recommended that you do the following:

If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:

  • A USB host connection with multiple USB 3.1 ports might not be able to support 10Gbps on each port simultaneously.
  • The type of port on a device does not determine whether the device is capable of USB 3.1 speeds. A USB-C port might not support USB 3.1 speeds, while USB-A and USB-B ports might support USB 3.1 speeds.
  • Any other devices that you include in your setup, such as an older hard drive in a USB 3.1 enclosure, might create a point of congestion and slow down transfer speeds.

To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). 

USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).

USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:

  • USB-B 3.1 cables are not compatible with USB-B 2.0 ports.
  • Unless you use an adapter, USB-C ports or cables will not work with USB-A or USB-B ports or cables.
  • Devices that require USB 3.1 transfer speeds of 10Gbps might not work with USB 3.0 or USB 2.0, or you might experience lower transfer speeds and impacted performance.
  • Bus-powered USB devices that requires more power than what USB 2.0 can provide are not compatible with USB 2.0.

To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:

  • The USB host connection
  • The USB cable
  • The USB device and any subcomponents (for example, a hard drive docking station and the hard drives in the docking station)

Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen