Svart SuperSpeed USB 3.0-hubb med 4 portar

Lägg till fyra externa SuperSpeed USB 3.0-portar från en enda USB-anslutning

Produkt ID: ST4300USB3EU

  • Fyra USB-portar av typ A som kan användas samtidigt
  • SuperSpeed USB 3.0-kompatibel med dataöverföringshastigheter på upp till 5 Gbps
  • Bakåtkompatibel med USB 2.0- och USB 1.0-/1.1-enheter
Ditt pris
€57,99 EUR excl. VAT
€72,49 EUR incl. VAT

ST4300USB3EU SuperSpeed USB 3.0-hubben med 4 portar låter dig lägga till 4 extra USB 3.0-portar från en enda USB 3.0-anslutning till värddatorn.

Denna USB 3.0-hubb är bakåtkompatibel med USB 2.0- och USB 1.x-standarderna för stöd för äldre USB-enheter och kan användas som en hubb på äldre system som inte har USB 3.0-portar.

Denna hubb är mångsidig och bärbar på riktigt med sin förmåga att ansluta olika USB 3.0/2.0/1.x-enheter samt att den kan användas med eller utan den medföljande strömadaptern.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Bygg ut dina USB 3.0-möjligheter med extra portar
  • Gör svårnådda USB-portar mer lättillgängliga genom att placera hubben var du vill dit kabeln når
  • Förläng en USB-enhets räckvidd genom att använda hubben som en mittpunkts-repeater

Fördelarna med StarTech.com

  • Anslut USB 3.0-enheter och äldre USB-enheter samtidigt med sina respektive hastigheter med bakåtkompatibilitet för USB 2.0/1.x
  • Anslut USB-enheter som drar mycket ström med den medföljande strömadaptern eller använd den helt enkelt som en bus-driven hubb

Partnernummer

  • Ingram Micro Sweden V931462
  • ALSO Sweden 000000000002764010
  • UPC 065030842594

Kompatibilitet

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Length 21,0 cm [8,3 in]
Package Width 15,0 cm [5,9 in]
Package Height 80,0 mm [3,1 in]
Fraktvikt (förpackning) 440,0 g [15,5 oz]
Hårdvara USB-C-enhetsport(ar) Nej
USB-C-värdanslutning Nej
Snabbladdningsport(ar) Nej
Portar 4
Gränssnitt USB 3.0
Chipset-ID VIA/VLI - VL811+
Indikatorer 1 - LED-indikatorer Ström (blå)
Kontakt(er) 1 - Externa portar USB Type-B (9-stifts) USB 3.0
4 - Externa portar USB Type-A (9-stifts) USB 3.0 (5 Gbps)
Miljö Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 5~85 % RH
Mjukvara OS-kompatibilitet OS Independent; No additional drivers or software required
Prestanda Total USB Power Output 10W
Maximal dataöverföringshastighet 5 Gbps
Särskilda anmärkningar/krav System- och kabelkrav USB 3.0-, 2.0- eller 1.x-kapabel värdkontroller med ledig port
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Utspänning 5 DC
Utström 2A
Polaritet på mittpol Positiv
Kontakttyp M
Strömförbrukning 10
Utseende Formfaktor Skrivbord
Färg Svart
Kabinettyp Av plast
Produktlängd 95,0 mm [3,7 in]
Produktbredd 68,0 mm [2,7 in]
Produkthöjd 23,0 mm [0,9 in]
Produktvikt 55,0 g [1,9 oz]
Vad det är i lådan 1 - Ingår i paketet USB 3.0-hub
USB 3.0-kabel
Strömadapter
Instruktionsbok

Tillbehör

Utgått
ECUSB3S2

2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add two USB 3.0 ports to your laptop through an ExpressCard slot

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
SVA5M3NEUA

DC-strömadapter - 5 V, 3 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€21,99 EUR excl. VAT
€27,49 EUR incl. VAT
PEXUSB3S11

PCI Express SuperSpeed USB 3.0-kort med 2 portar och UASP-stöd - 1 Intern, 1 extern

Lägg till en intern och en extern SuperSpeed USB 3.0 till din dator

Ditt pris
€49,99 EUR excl. VAT
€62,49 EUR incl. VAT
Utgått
PEXUSB3S2

PCI Express SuperSpeed USB 3.0-kortadapter med 2 portar och UASP-stöd

Lägg till två USB 3.0-portar till din stationära dator genom en PCI Express-utbyggnadskortplats

Ditt pris
€34,99 EUR excl. VAT
€43,74 EUR incl. VAT
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT
USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external devices and transfer data at 10x the speed of USB 2.0

Ditt pris
€11,99 EUR excl. VAT
€14,99 EUR incl. VAT
USBEXTAA3BK

91 cm svart USB 2.0-förlängningskabel A till A – M/F

Förlänger räckvidden på din befintliga USB-enhet med 91 cm

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB A-to-B cable

  • Computer USB port

  • USB peripheral(s)

To test your setup components, try the following:

  • Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hub, make sure that you do the following:

  • If a power adapter is included, provide power to the USB hub.

  • Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.

  • Install the drivers for the USB peripheral.

  • Install the latest drivers for the USB controller and motherboard chipset.

Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.

When testing your USB peripherals, make sure that you do the following:

  • If required, attach external power.

  • Confirm that the peripheral works on a standard USB port.

If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:

  • Use a new USB A-to-B cable.

  • Test your setup using basic USB peripherals, such as a keyboard or mouse.

  • Test using another USB port.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Before You Buy

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...