Produkt ID: ST53004U1C
Här är ett tillbehör som alla användare av mobila enheter måste ha. Med denna kompakta USB 3.0-hub kan du ansluta fyra extra USB-enheter till din dator och dessutom enkelt snabbladda din mobila enhet med hjälp av hubbens dedicerade laddningsport (DCP).
Med hubbens dedicerade laddningsport på 2,4 A går det snabbt och enkelt att ladda din smarttelefon, surfplatta och andra USB-laddade enheter, inklusive Android™-, Apple- och Samsung™-enheter.
Laddnings- och dataportarna fungerar samtidigt så att du enkelt kan snabbladda din mobila enhet samtidigt som du använder dina andra USB 3.0-tillägg. Den dedicerade laddningsporten är på även när värddatorn är avstängd, i sovläge eller frånkopplad helt.
Boosta ditt systems förmågor genom att lägga till fyra USB 3.0-portar och njut av snabba överföringshastigheter på upp till 5 Gbps. USB 3.0-hubben (även känd som USB 3.1 Gen 1) fungerar med dina enheter med hög bandbredd, som till exempel externa hårddiskar, USB-minnen, högupplösta webbkameror, videokameror m.m.
USB 3.0-hubben med 4 portar har en liten storlek som inte tar upp så mycket plats på skrivbordet. Och med gott om plats mellan varje USB 3.0-port är det enkelt att koppla i och ur enheterna som du använder oftast.
Installationen är enkel eftersom installation av drivrutiner inte behövs och för extra flexibilitet är hubben USB-driven eller självdriven med hjälp av den medföljande strömadaptern.
ST53004U1C täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.
Obs.: Den medföljande strömadaptern behövs för att strömförse den dedicerade laddningsporten.
Warranty Information | Warranty | 2 Years |
---|---|---|
Förpackning | Package Height | 53 mm [2.1 in] |
Package Length | 15.1 cm [5.9 in] | |
Fraktvikt (förpackning) | 411 g [14.5 oz] | |
Package Width | 21.6 cm [8.5 in] | |
Hårdvara | USB-C-enhetsport(ar) | Nej |
USB-C-värdanslutning | Nej | |
Snabbladdningsport(ar) | Ja | |
Portar | 4 | |
Gränssnitt | USB 3.0 | |
Busstyp | USB 3.0 | |
Industristandarder | USB Battery Charging Specification Rev. 1.2 | |
USB 3.0 - bakåtkompatibel med USB 2.0/1.1 | ||
Chipset-ID | VIA/VLI - VL812 | |
Indikatorer | 4 - LED-indikatorer | Portstatus (blå) |
Kontakt(er) | 4 - Kontakttyp(er) | USB Type-A (9-stifts) USB 3.0 (5 Gbps) |
1 - Kontakttyp(er) | USB 3.0 A (Snabbladdning, 9-stifts) | |
Miljö | Drifttemperatur | 0°C to 40°C (32°F to 104°F) |
Förvaringstemperatur | -10°C to 70°C (14°F to 158°F) | |
Luftfuktighet | 10~90 % RH (icke-kondenserande) | |
Mjukvara | OS-kompatibilitet | OS Independent; No additional drivers or software required |
Prestanda | Maximal dataöverföringshastighet | 5 Gbps |
Typ och hastighet | USB 3.0 - 5 Gbit/s | |
Särskilda anmärkningar/krav | System- och kabelkrav | Värddator med en ledig USB 3.0-port |
Den medföljande strömadaptern måste anslutas till hubben för att den dedicerade laddningsporten (DCP) ska fungera | ||
Obs. | Prestandan kan bli begränsad vid anslutning till en USB 2.0-värdport. | |
Ström | Power Source | AC-adapter medföljer |
Inspänning | 100 - 240 AC | |
Inström | 0.6 A | |
Utspänning | 12V DC | |
Utström | 2A | |
Polaritet på mittpol | Positiv | |
Kontakttyp | N | |
Strömförbrukning | 24 | |
Utseende | Formfaktor | Skrivbord |
Produktvikt | 75 g [2.6 oz] | |
Färg | Svart | |
Kabinettyp | Av plast | |
Produktlängd | 10.3 cm [4.1 in] | |
Produktbredd | 60 mm [2.4 in] | |
Produkthöjd | 22 mm [0.9 in] | |
Vad det är i lådan | 1 - Ingår i paketet | USB 3.0-hub med 4 portar + dedicerad laddningsport på 2,4 A |
USB 3.0 värdkabel | ||
Universell strömadapter (NA/EU/UK/AU) |
Lägg till fyra USB 3.0-portar med två oberoende kanaler, LP/SATA-ström och laddningsport till din PC genom en PCI Express-port
Add 2 USB 3.0 Ports to a Laptop through an ExpressCard Slot
Connect to your external devices and transfer data at 10x the speed of USB 2.0
Lägg till fyra USB 3.0-portar med fyra oberoende kanaler, LP/SATA-ström och laddningsport till din PC genom en PCI Express-port
Lägg till 2 SuperSpeed USB 3.0-portar till din PCI Express-kapabla PC
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
USB A-to-B cable
Computer USB port
USB peripheral(s)
To test your setup components, try the following:
Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.
Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the hub, make sure that you do the following:
If a power adapter is included, provide power to the USB hub.
Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.
Install the drivers for the USB peripheral.
Install the latest drivers for the USB controller and motherboard chipset.
Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.
When testing your USB peripherals, make sure that you do the following:
If required, attach external power.
Confirm that the peripheral works on a standard USB port.
If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:
Use a new USB A-to-B cable.
Test your setup using basic USB peripherals, such as a keyboard or mouse.
Test using another USB port.
If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.
When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.
On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.
If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.
USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.