Produktsökning

Mini Thunderbolt 3-dockningsstation med dubbla 4K-skärmar och HDMI ‒ Mac- och Windows-dockningsstation ‒ utgått, begränsad lagerhållning, ersatt av TB3DKM2HDL (TB3DKM2HD)

Dockningsstation för bärbar dator | Mac och Windows® | Bussdriven | 2x USB-A

Produkt ID: TB3DKM2HD

  • ERSATT AV TB3DKM2HDL: Ny version som erbjuder samma funktionalitet. Dessutom ger den extra långa inbyggda kabeln på 28 cm utökad räckvidd för att minska port-/kontaktbelastningen på stativen för MacBook-datorer och bärbara datorer
  • Anslut dubbla UHD 4K HDMI-skärmar vid 60 Hz med den här bärbara Thunderbolt 3-dockningsstationen; Windows- och macOS-kompatibel
  • Utökade dubbla skärmar på MacBook Pro/Air med Intel-processor och enkel skärm med Apple M1 Chip
Ditt pris
€217,99 EUR excl. VAT
€272,49 EUR incl. VAT

Den här Thunderbolt™ 3-dockningsstationen rymmer hög prestanda i en kostnadseffektiv och kompakt dockningsstation och tillhandahåller de viktigaste anslutningarna för att du ska kunna vara produktiv. Till Thunderbolt 3-dockningsstationen som får sin ström genom en buss kan du ansluta dubbla 4K HDMI-skärmar, Gigabit Ethernet och två USB-portar (Type-A). För en flexibel installation har den medföljande USB-C-kabeln förlängts till 20 cm.

Skapa en dubbel 4K 60 Hz arbetsstation

Den här bärbara Thunderbolt 3 till HDMI-dockan är perfekt för redigering av 4K-video eller andra Ultra HD-uppgifter, och den stödjer 40 Gbit/s genomströmning med 4K-upplösning vid 60 Hz på två HDMI-skärmar via en enda Thunderbolt 3-port. Kör resurskrävande tillämpningar på två oberoende skärmar utan att anstränga systemresurserna.

Anslut din bärbara dator till:

  • 2x 4K HDMI-skärmar (upp till 4096 x 2160 upplösning vid 60 Hz)

Enkel installation och distribution 

Anslut bara Thunderbolt 3-dockningsstationen till din bärbara dator med hjälp av den medföljande Thunderbolt 3-kabeln och börja arbeta direkt. Inga tidskrävande installationer av drivrutiner behövs.

De portar du mest behöver

Gigabit Ethernet-porten (med stöd för PXE-start och Wake-on-LAN) säkerställer tillförlitlig trådbunden nätverksåtkomst för att förbättra din produktivitet. En USB 3.0 Type-A-port, med gott om utrymme runt omkring, gör att du kan ansluta en USB-enhet, som ett flashminne, för enkel filåtkomst. Anslut ytterligare en USB-enhet med USB 2.0 Type-A-porten.

TB3DKM2HD är Thunderbolt-certifierad och omfattas av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Granska/redigera bilder eller mediafiler på två 4K HDMI-skärmar
  • Idealiskt för delade eller tillfälliga arbetsstationer, till exempel hot desks (hoteling)
  • Ideal for shared or temporary work stations, such as hot desks (hoteling)

Partnernummer

  • Ingram Micro Sweden V934398
  • ALSO Sweden 000000000003082717
  • UPC 065030872911

Kompatibilitet

  • Windows 10 logo
  • Windows 8 logo
  • Windows 7 logo
  • macOS Sierra (10.12) logo
  • macOS High Sierra (10.13) logo
  • macOS Mojave (10.14) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.15

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Fraktvikt (förpackning) 260,0 g [9,2 oz]
Package Length 20,8 cm [8,2 in]
Package Width 14,5 cm [5,7 in]
Package Height 36,0 mm [1,4 in]
Hårdvara 4K-stöd Ja
Snabbladdningsport(ar) Nej
Skärmstöd 2
Busstyp Thunderbolt 3
Industristandarder Thunderbolt 3
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 - bakåtkompatibel med USB 2.0 och 1.1
USB 2.0 - bakåtkompatibel med USB 1.1
Chipset-ID Intel - Alpine Ridge JHL6540
Intel - WGI210AT
Texas Instruments - TPS65983
ASMedia - ASM1042A
Parade - PS176
Kontakt(er) 1 - Kontakttyp(er) Thunderbolt™ 3 USB-C (24-pin) (40Gbps)
USB Type-A (9-stifts) USB 3.0 (5 Gbps)
USB Type-A (4-stifts) USB 2.0
RJ-45
2 - Kontakttyp(er) HDMI (19-stifts)
Miljö Drifttemperatur 5°C to 35°C (41°F to 95°F)
Förvaringstemperatur -40°C to 70°C (-40°F to 158°F)
Luftfuktighet 5~95 % RH (icke-kondenserande)
Mjukvara OS-kompatibilitet Windows® 7, 8, 8.1, 10
macOS 10.12 - 10.15
Prestanda Maximal dataöverföringshastighet 40 Gbps (Thunderbolt 3)
5 Gbps (USB 3.0)
2 Gbps (Ethernet; Full-Duplex)
Maximal digital upplösning Dubbla 4K-skärmar - HDMI 4096 x 2160p @ 60Hz / 3840 x 2160p @ 60Hz
Typ och hastighet Thunderbolt 3 - 40 Gbit/s
UASP-stöd Ja
Kompatibla nätverk 10/100/1000 Mbps
Auto MDIX Ja
PXE Ja
Stöd för full-duplex Ja
Ström Power Source Strömförsörjd via USB
Särskilda anmärkningar/krav System- och kabelkrav Thunderbolt 3-utrustad dator med en Thunderbolt 3-port.
Obs. En 4K-kapabel skärm krävs för att få 4Kx2K-upplösning (4K är även känt som 4Kx2K).
MacBook Air- och MacBook Pro-system som använder nya Apple M1 Chip stöder endast en extern bildskärm över Thunderbolt 3-portarna, även när de är anslutna till en Thunderbolt 3-dockningsstation med flera videoutgångar. Denna begränsning med en bildskärm påverkar inte Intel-baserade Mac-datorer med Thunderbolt 3.
Utseende Färg Black & Gray
Kabinettyp Aluminium
Kabellängd 20 cm [7,9 in]
Produktlängd 12,4 cm [4,9 in]
Produktbredd 61,0 mm [2,4 in]
Produkthöjd 18,8 mm [0,7 in]
Produktvikt 145,8 g [5,1 oz]
Vad det är i lådan 1 - Ingår i paketet Dockningsstation
Användarhandbok

Tillbehör

UUSBHAUB6

6ft Micro USB Cable - A to Micro B

Charge or sync micro USB mobile devices from a standard USB port on your desktop or mobile computer

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
UUSBHAUB10

10 ft Micro USB Cable - A to Micro B

Charge or sync micro USB mobile devices from a standard USB port on your desktop or mobile computer

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

If you set your display to [email protected] and connect a display to the DisplayPort output on the laptop docking station, your display may flicker. This issue only affects certain monitors and is a result of an interoperability issue between the hardware used in the display and the docking station. This issue is not specific to StarTech.com docking stations.

To resolve this issue, try any of the following:

  • Connect a USB-C to DisplayPort cable from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the display. (StarTech.com product ID for the USB-C to DisplayPort cable: CDP2DPMM1MB.)
  • Connect a USB-C to HDMI 2.0 cable from the USB-C Thunderbolt 3 port on the docking station to the HDMI input on the display. (StarTech.com product ID for the USB-C to HDMI 2.0 cable: CDP2HD4K60.)
  • If you are using a dual monitor setup, connect a dual DisplayPort adapter from the USB-C Thunderbolt 3 port on the docking station to the DisplayPort input on the displays. (StarTech.com product ID for the Thunderbolt 3 dual DisplayPort adapter: TB32DP2.)
  • Disable MST (Multi Stream Transport) or DisplayPort 1.2 mode on your display and enable [email protected] Refer to the information provided by the manufacturer for assistance. 

If your computer is not detecting your Thunderbolt™ 3 device, try the following:

  • Update the Thunderbolt software on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller NVM firmware on your Thunderbolt 3 host device.
  • Update the Thunderbolt controller drivers.
  • Update your motherboard BIOS or UEFI.

For more information about how to update the software, firmware, drivers, and BIOS or UEFI, refer to the website of the manufacturer of the Thunderbolt 3 host device. The following website includes links to some of the manufacturers of Thunderbolt 3 host devices: https://thunderbolttechnology.net/updates. If the manufacturer of your host device is not listed, you should contact the manufacturer or refer to their website for more information.

For more information about how to check which version of the Thunderbolt software and firmware you are currently using, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-check-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

If you are only getting a single display to work with your Thunderbolt™3 device, make sure that your Thunderbolt 3 host device can support two separate DisplayPort lines over Thunderbolt 3. 

While Thunderbolt 3 supports dual monitors over a single connection, not all Thunderbolt 3 host devices are designed to meet this requirement. If your Thunderbolt 3 host device does not meet this requirement, you cannot troubleshoot this issue with software, firmware, or driver updates, and you cannot use this device to achieve dual displays over Thunderbolt 3. If you are not sure whether your Thunderbolt 3 host device supports dual monitors, contact your Thunderbolt 3 host device manufacturer.

If you confirmed that your Thunderbolt 3 host device does support dual monitors and you are only seeing a single display, see the following FAQ: https://www.startech.com/faq/thunderbolt-3-update-software-firmware.

For more information about Thunderbolt 3 host system and motherboard compatibility, refer to the Thunderbolt 3 Compatibility and Troubleshooting guide.

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your Thunderbolt 3 device do one of the following:

  • Select Connect Only Once.
  • Select Always Connect.

Caution! If you select Do Not Connect, only video will pass through on your Thunderbolt 3 device.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

To use a Thunderbolt 3 adapter to output to a display at 60Hz, your monitor must support the refresh rate and you need to set the monitor to work at 60Hz. By default, most monitors are set to DP1.1, which will not work with this Thunderbolt 3 device when you use a display at 60Hz. In most cases, you need to set your monitor's DisplayPort settings to DP1.2.

To resolve this issue, use the buttons on your monitor to change the DisplayPort settings to DP1.2. For more information about changing your monitor settings, refer to the website of the manufacturer of your monitor.

Hur man

When you connect a Thunderbolt™ device to any Windows operating system that can support Thunderbolt 3, a pop-up message appears. To use your device, complete the following:

  1. In the New Thunderbolt devices have been attached pop-up message, click OK.
  2. In the User Account Control pop-up message, click Yes.
  3. In the Approve Thunderbolt Devices pop-up message, do one of the following:
    • If you want to authorize your Thunderbolt devices every time that you connect them, select Connect Only Once in the drop-down list.
    • If you want to authorize your Thunderbolt devices only once, select Always Connect in the drop-down list.
  4. Click OK.

If you accidentally set your Thunderbolt device to Do Not Connect in step three above, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-denied-authentication.

If you accidentally set a Thunderbolt™3 device to not connect to your computer when prompted by the system, you can force the software to prompt you again for authentication. To do so, complete the following:

  1. Right-click the Thunderbolt icon.
  2. Click Approve Attached Devices.
  3. Select the Thunderbolt 3 port that you want to authenticate.

You can use the Thunderbolt™ software to manage your Thunderbolt 3 devices on a computer running a version of Windows. To manage your Thunderbolt 3 devices, complete the following:

  1. Click Start.
  2. Type Thunderbolt and click on the search result.
  3. Right-click the Thunderbolt icon.
  4. Click Manage Approved Devices.

Before You Buy

Components

Thunderbolt™ 3 is the latest version of the Thunderbolt standard for connecting computers and electronic devices. It is capable of the following:

  • Total bandwidth up to 40Gbps. Data transfer speeds are dependent on the other features that you are using in your setup.
  • USB 3.1 Gen 2 support.
  • 4K 60Hz video on one or two separate displays.
  • 5K 60Hz video on a single display.
  • A 10 GbE network connection between two Thunderbolt 3 compatible computers.
  • Up to six devices daisy-chained from a single Thunderbolt 3 port.
  • Alternate modes, such as DisplayPort Alternate Mode (DP Alt Mode).
  • Bi-directional power delivery up to 100W (not all Thunderbolt 3 devices support power delivery).

USB-C and Thunderbolt 3

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: https://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

Backwards compatibility

If you use an adapter, Thunderbolt 3 host connections are compatible with Thunderbolt 1 and Thunderbolt 2 devices. You can use the StarTech.com TBT3TBTADAP to make a Thunderbolt 3 host connections backwards compatible.

Thunderbolt 3 devices are not backwards compatible with Thunderbolt 1 and Thunderbolt 2 host connections.

Although the Thunderbolt™ 3 standard is capable of data transfer speeds up to 40Gbps, not every cable can support this bandwidth. For example, cables over a certain length or made with certain materials are only capable of data transfer speeds up to 20Gbps. 

To confirm the capability of your Thunderbolt 3 cable, refer to the information provided by the manufacturer. StarTech.com lists the capabilities of the Thunderbolt 3 cables on the individual product pages.

There are two different Thunderbolt 3 cable symbols: the 20Gbps symbol and the 40Gbps symbol. The 20Gbps symbol is composed of the Thunderbolt 3 symbol, and the 40Gbps symbol is composed of the Thunderbolt 3 symbol and the number three. These images are shown below.

Thunderbolt 3 uses the USB-C connector, but not all host connections, cables, and devices with a USB-C connector support Thunderbolt 3. This means that a USB-C device is compatible with a Thunderbolt 3 host connection, but a Thunderbolt 3 device is not compatible with a USB-C host connection. Therefore, it is important to know whether you have a USB-C or a Thunderbolt 3 host, cable, or device.

To determine if your component is a Thunderbolt 3 device, look for the Thunderbolt 3 symbol (shown below). USB-C devices do not include this symbol.  For more information about USB-C, see the following FAQ: http://www.startech.com/faq/usb-c-port-capabilites.

Thunderbolt symbol: https://sgcdn.startech.com/005329/media/products/gallery_large/TBLT3MMXM.B.jpg.

No, you cannot use this device to increase the maximum number of displays that a video card supports. For example, if your video card only supports up to three displays and you add this device to your setup, your display limit is still three displays.

If you have connected more than one of this device to the same computer and are experiencing display issues, you should make sure that your video card can support the number of displays that you are using in your setup.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen