1 Port USB over Cat5 / Cat6 Ethernet Extender - up to 131ft (40m)

Extend a USB 1.1 device up to 40m (131ft) away from a computer, over a Cat5/Cat6 cable

Produkt ID: USB110EXT2

  • 1x USB 1.1 port, 1x RJ45 port
  • Support for a maximum distance of up to 40m (131ft), over Cat5 or Cat6 cabling
  • Full Speed USB 1.1 compliant host interface, with data bandwidth up to 12 Mbps
Ditt pris
€137,99 EUR excl. VAT
€172,49 EUR incl. VAT
Var kan jag köpa

The USB110EXT2 USB 1.1 Extender enables you to extend a USB 1.1 connection over distances of up to 40-meters (131-feet) using standard Cat5 or Cat6 UTP cabling, bypassing the normal limitation of 5m (15ft) for USB 1.1 devices and allows for the host computer system to be safely stored in a remote location.

The USB Extender features a compact design with no external power requirements, making it the ideal solution for remote USB cameras, keyboards, mice or other input devices for environments where install space or access to electrical outlets is limited.

Able to deliver up to 300mA of power (when supplied with 500mA from the host computer), the extender is fully compliant with the USB 1.1 specification, with support for up to 12Mbps of data bandwidth.

Backed by a StarTech.com 3-year warranty and free lifetime technical support.

Användning

  • Secured environments where the host computer must be in a secure, inaccessible location from the the keyboard, mouse, camera or other USB input devices
  • Use existing in-wall Cat5/Cat6 wiring to extend USB 1.1 device connections between rooms
  • Reduce cable clutter and the need for mid-point USB hubs/repeaters by running a single, easy-to-install Cat5/Cat6 cable
  • Industrial control environments where the host computer must be located away from interference or contamination

Fördelarna med StarTech.com

  • USB 1.1 extender supports any full-speed (12 Mbps) or low-speed (1.5 Mbps) USB peripheral at up to 131 feet (40 meters) - a cost-effective solution for extending USB devices that don't require the higher bandwidth offered by USB 2.0+
  • Provides more power at the remote end (up to 300mA), without external power, than most other similar USB Ethernet extenders, for more versatile device connection options
  • USB over Cat5/Cat6 eliminates the need to cascade expensive, inflexible and space consuming USB hubs or repeaters for extending the range of a USB device

Partnernummer

  • Ingram Micro Sweden V932017
  • ALSO Sweden 000000000002776437
  • UPC 065030847896

Kompatibilitet

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 60,0 mm [2,4 in]
Package Length 12,8 cm [5,0 in]
Fraktvikt (förpackning) 170,0 g [6,0 oz]
Package Width 12,8 cm [5,0 in]
Förpackningsantal 1
Hårdvara Portar 1
Kablage Cat 5e UTP eller bättre
Kontakt(er) 1 - Lokala enhetskontakter USB Type-A (4-stifts) USB 2.0
RJ-45
1 - Fjärrenhetskontakter RJ-45
USB Type-A (4-stifts) USB 2.0
Miljö Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -20°C to 70°C (-4°F to 158°F)
Luftfuktighet 20% ~ 80% RH
Mjukvara OS-kompatibilitet OS Independent; No additional drivers or software required
Prestanda Maximal dataöverföringshastighet 12 Mbps
Maximalt avstånd 40 m / 131 ft
Ström Power Source Strömförsörjd via USB
Särskilda anmärkningar/krav System- och kabelkrav Available USB port
Utseende Produktvikt 110,0 g [3,9 oz]
Färg Svart
Kabinettyp Av plast
Produktlängd 85,0 mm [3,3 in]
Produktbredd 40,0 mm [1,6 in]
Produkthöjd 25,0 mm [1,0 in]
Vad det är i lådan 1 - Ingår i paketet USB 1.1 Extender Local Unit
USB 1.1 Extender Remote Unit
Instruction Manual

Certifikat

View downloadable documentation
  • RoHS & REACH Certificate of Compliance logo
  • Waste Electrical and Electronic Equipment Directive (WEEE) logo
  • CE logo
  • RCM logo
  • FCC logo

Tillbehör

WIRC6PATBLRL

Bulk Cat6 Ethernet Cable - 1000 ft. - Stranded - CM-Rated for In-Wall Use - Blue

Make Gigabit network connections using this high quality Cat6 Cable

Ditt pris
€296,99 EUR excl. VAT
€371,24 EUR incl. VAT
WIRC5ECMRGRY

Cat 5e Ethernet-kabel i bulkförpackning - 304,8 m - CMR-klassad - grå

Gör pålitliga Ethernet-anslutningar vid tillämpningar som kräver CMR-klassificerade kablar

Ditt pris
€180,99 EUR excl. VAT
€226,24 EUR incl. VAT
Utgått
45PATCH100GN

Cat5e Patch Cable with Snagless RJ45 Connectors - 100 ft, Green

Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet

Ditt pris
€20,99 EUR excl. VAT
€26,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

opens in new window
Was this information helpful?

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.

Du kanske också gillar

Tillbaka till toppen