Reseadapter för bärbara datorer - HDMI och GbE - USB 3.0

Lägg till en Gigabit Ethernet RJ45-port och HDMI-utgång till din portbegränsade bärbara dator genom en enda USB 3.0-port

Produkt ID: USB31GEHD

  • 1x 10/100/1000 Mbps nätverksport, 1x HDMI-utgång
  • Drivs via USB-buss - Ingen extern strömadapter behövs
  • Kompakt, slimmad och lätt design för maximal portabilitet
Ditt pris
€99,99 EUR excl. VAT
€124,99 EUR incl. VAT

USB31GEHD USB 3.0-minidockningsstationsadaptern låter lägga till Gigabit Ethernet och HDMI®-anslutningsportar till din Ultrabook™ eller bärbara eller stationära dator genom en enda USB 3.0-värd, vilket ger dig två anslutningsportar som inte alltid finns tillgängliga på moderna, mobila datorer.

Denna adapter ger fullständig Gigabit-bandbredd för snabbare nätverksanslutningar och utnyttjar hos USB 3.0 gränssnittets kapacitet på 5 Gbps för att få stöd för 10/100/1000 Mbps Ethernet och är helt kompatibel med IEEE 802.3/2/ab-standarder. Gigabit-adaptern fungerar dessutom som ett externt grafikkort som låter dig lägga till en extern skärm till din bärbara dator med 2048x1152-video och 5.1 surround ljud (endast från HDMI®-port).

Denna USB-drivna adapter är en perfekt multiportskombo för mobila eller stationära miljöer där inte externa strömadaptrar behövs och är ett perfekt tillbehör för bärbara datorer som enkelt får plats i din resväska med dess kompakta och portabla design.

Adaptern för mini dockningsstationer garanterar snabb och enkel installation genom att automatiskt ladda ner de senaste drivrutinerna i Windows® system som har en aktiv nätverksanslutning och är bakåtkompatibel med USB 2.0-system (hastigheten begränsas av USB-buss).

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Övervinn anslutningsbegränsningar genom att lägga till två viktiga anslutningsportar till din bärbara dator
  • Bli klar med jobbuppgifter när du är på språng. Det här är en perfekt resepartner för din Ultrabook™, bärbara dator och netbook
  • Anslut din bärbara dator till ett trådat Gigabit-nätverk när det inte finns WiFi-anslutningar, som till exempel i klassrum, på kontor eller på hotell
  • Ersätt en trasig och inbyggd Ethernet-port på en bärbar dator eller uppgradera till 1000 Mbps Gigabit-anslutning
  • Lägg till en skärm till din dator med stöd för extern skärm - kolla din e-post på skärmen på din bärbara dator medan du surfar på en extern skärm
  • Anslut till din HDMI-utrustade projektor och visa engagerande presentationer eller multimediainnehåll

Fördelarna med StarTech.com

  • Kräver endast en USB 3.0 värdanslutning för att ge full Gigabit-bandbredd och HDMI®-utgång
  • Ta med dig adaptern överallt med den resevänliga och kompakta USB-drivna designen utan behov av extern strömkälla
  • Snabb, problemfri installation med automatisk nerladdning av drivrutiner på Windows-datorer med en aktiv nätverksanslutning

Partnernummer

  • ALSO Sweden 000000000002776458
  • UPC 065030856751

Kompatibilitet

  • Windows 8 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows 11 logo
  • Mac OS X El Capitan (10.11) logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® XP SP3 (32-bitars), Vista, 7, 8, 8.1, 10
Mac OS® 10.6 till 10.12, 10.14 - 10.15

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 33.0 mm [1.3 in]
Package Length 14.6 cm [5.7 in]
Fraktvikt (förpackning) 152.0 g [5.4 oz]
Package Width 17.2 cm [6.8 in]
Hårdvara 4K-stöd Nej
Snabbladdningsport(ar) Nej
Skärmstöd 1
Busstyp USB 3.0
Industristandarder IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
USB 3.0 - Hubbport stöder bakåtkompatibilitet med USB 2.0/1.1
Chipset-ID DisplayLink - DL-3700
Indikatorer 1 - LED-indikatorer Link
Activity
Kontakt(er) 1 - Kontakttyp(er) USB Type-A (9-stifts) USB 3.0 (5 Gbps)
RJ-45
HDMI (19-stifts)
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 70°C (-4°F to 158°F)
Luftfuktighet 10-90% RH
Mjukvara OS-kompatibilitet Windows® XP SP3 (32-bitars), Vista, 7, 8, 8.1, 10
Mac OS® 10.6 till 10.12, 10.14 - 10.15
Prestanda Maximal dataöverföringshastighet 5 Gbps (USB 3.0)
2 Gbps (Ethernet; Full-Duplex)
Maximal digital upplösning 2048x1152 (HDMI)
Lower resolutions are also supported.
Typ och hastighet USB 3.0 - 5 Gbit/s
Kompatibla nätverk 10/100/1000 Mbps
Auto MDIX Ja
Stöd för full-duplex Ja
Allmänna specifikationer This USB video adapter uses a DisplayLink family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a Trigger or Fresco family chipset.
Särskilda anmärkningar/krav System- och kabelkrav USB-kapabelt datorsystem med tillgänglig USB 3.0-port
Obs. Utökade bildskärmar stöds för närvarande endast med DisplayLink-baserade produkter på macOS 10.11 till 10.13.3. Detta kan komma att ändras i framtida versioner.
Ström Power Source Strömförsörjd via USB
Utseende Produktvikt 43.0 g [1.5 oz]
Färg Svart
Kabinettyp Av plast
Kabellängd 111 mm [4.4 in]
Produktlängd 65.0 mm [2.6 in]
Produktbredd 65.0 mm [2.6 in]
Produkthöjd 1.9 cm [0.7 in]
Vad det är i lådan 1 - Ingår i paketet USB 3.0-minidockningsadapter
Drivrutin CD
Instruktionsbok

Tillbehör

USB3SEXT1MBK

1m Black SuperSpeed USB 3.0 Extension Cable A to A - M/F

Extend your SuperSpeed USB 3.0 cable by up to an additional meter

Ditt pris
€9,99 EUR excl. VAT
€12,49 EUR incl. VAT
HDDVIMF8IN

20 cm HDMI till DVI-D-videokabeladapter - HDMI-hane till DVI-hona

Anslut en DVI-enhet till en HDMI®-kapabel enhet med hjälp av en standard DVI-D-kabel

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
USB31CAADP

USB-C till USB-A-kabeladapter - M/F - 15 cm - USB 3.0 - USB-IF-certifierad

Anslut din bärbara dator med USB-Type C till äldre USB-utrustning med hjälp av denna slitstarka adapter

Ditt pris
€15,99 EUR excl. VAT
€19,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Note: Do not physically connect the USB laptop docking station to your computer until you are instructed to (Step 6).

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

    Note: Windows will typically save the files to the Downloads folder associated with your user account (for example, C:\Users\your_name\Downloads).
     
  2. Once the download is complete, extract the files from the zip folder. Right-click the DisplayLink.zip or DisplayLinkDock.zip file, select Extract All and follow the on-screen instructions.
  3. Select the appropriate folder for your operating system.
  4. Right-click Setup.exe. 
  5. Click Run as Administrator.

    Note: If the Run as Administrator option is not available, you may be attempting to run the installer from within the zipped file. Please extract the files using the instructions in Step 2.
     
  6. Follow the on-screen prompts to install the device drivers and software. Restart the computer either when prompted, or when the installer disappears.
  7. Connect any video cables from your display(s) to the video port(s) on the docking station. 
  8. Once Windows has restarted, connect the docking station to your computer.
  9. Your computer will automatically complete the driver installation.

Note: Installation may take several seconds to complete. During the installation your display might flicker. This is normal.  Once the installation is complete you will see your Windows desktop extended to the additional monitor(s).

Note: Do not physically connect the USB laptop docking station to your computer until instructed to (Step 6).

  1. Log in to the computer as the local administrator.
  2. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

    Note: Windows typically saves the files to the Downloads folder associated with your user account (for example, C:\Users\your_name\Downloads.
     
  3. Once the download is complete, extract the files from the zip file. (Right-click the DisplayLink.zip file, select Extract All and follow the on-screen instructions.)
  4. Select the appropriate folder for your operating system.
  5. Double-click Setup.exe.
  6. Follow the on-screen prompts to install the device drivers and software. Restart the computer either when prompted, or when the installer disappears.
  7. Once Windows has restarted, connect the USB laptop docking station to your computer.
  8. Your computer will automatically complete the driver installation.

Note: Installation may take several seconds to complete. During the installation your display may flicker. This is normal. Once the installation has completed you will see your Windows desktop extended to the additional monitor.

Note: Do not physically connect the laptop docking station to your computer until instructed to (Step 7).

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Mac OS X will typically save the files to the Downloads folder that is associated with your user account (for example, hard_drive_name\Users\your_name\Downloads).

  1. Double-click the DisplayLink.zip file.
  2. Double-click the MAC OS folder.
  3. Double-click the appropriate folder for your operating system.
  4. Double-click the DisplayLink Installer 75598.dmg file.
  5. Follow the prompts to install the new drivers. Restart the computer when prompted.
  6. Once Mac OS X has restarted, connect the laptop docking station to your computer.

Note: Installation might take several seconds to complete. During the installation your display might flicker; this is normal. Once the installation has completed you will see your Macintosh desktop extended to any connected monitors.

To install your USB laptop docking station in Ubuntu 15.0 (kernel 3.16), you need to download the Dynamic Kernel Module Support (DKMS) package and the adapter driver.

To install the DKMS package, complete the following:

  1. On your desktop, click the Ubuntu icon, type terminal, and then press Enter.
  2. Type sudo apt-get install dkms, and then press Enter.

When the DKMS package is installed, complete the following:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product packaging.

Note: Ubuntu typically saves the files to the Downloads folder that is associated with your user account (for example, ~/Downloads).

  1. When the download is complete, open the zip folder that you downloaded and click and drag the Ubuntu folder to your desktop.
  2. Click the Ubuntu icon, type terminal, and then press Enter.
  3. Type cd ~/Desktop/Ubuntu, and then press Enter.
  4. Type chmod 755 displaylink-driver-1.1.62.run, and then press Enter.
  5. Type sudo ./displaylink-driver.run, and then press Enter.
  6. When the driver package finishes installing, restart your computer. To restart your computer, type sudo reboot, and then press Enter.
  7. When Ubuntu finishes restarting, connect the USB video adapter to your computer.

Note: It can take several minutes to complete the installation. During this time, your display might flicker, but this is normal behavior. When the installation is complete, your Ubuntu desktop is extended to the additional monitor.

Problemsökning

Om skärmen som är ansluten genom USB-skärmadaptern inte vaknar när datorn har varit i viloläge en längre tid är det antagligen för att Windows automatiskt har stängt av USB-rotnaven för att spara ström. 

Stegen nedan visar hur man konfigurerar USB-rotnaven så att den inte stängs av under viloläge.
 

Windows 8/10

  1. Tryck på Windows-knappen + X på tangentbordet och välj Kontrollpanelen.
  2. Klicka på Maskinvara och ljud och sedan på Energialternativ.
  3. Klicka på Ändra schemainställningar för det schema som du vill ändra.
  4. Klicka på Ändra avancerade inställningar.
  5. Klicka på plus-tecknet (+) jämte "USB-inställningar" och "Inställning för valbar frånkoppling" för att ta fram fler alternativ och ändra inställningen till Inaktiverad.
  6. Klicka på OK för att godkänna inställningen.

Obs.: Du kan behöva koppla ur och återansluta USB-skärmadaptern efter dessa inställningar för att anslutningen ska fungera igen.

Windows 7/Vista

  1. Klicka på Start-knappen och välj Kontrollpanelen.
  2. Klicka på Maskinvara och ljud och sedan på Energialternativ.
  3. Klicka på Ändra schemainställningar för det schema som du vill ändra.
  4. Klicka på Ändra avancerade inställningar.
  5. Klicka på plus-tecknet (+) jämte "USB-inställningar" och "Inställning för valbar frånkoppling" för att ta fram fler alternativ och ändra inställningen till Inaktiverad.
  6. Klicka på OK för att godkänna inställningen.

Obs.: Du kan behöva koppla ur och återansluta USB-skärmadaptern efter dessa inställningar för att anslutningen ska fungera igen.

Windows XP

  1. På skrivbordet, högerklicka på ikonen Den här datorn och välj Egenskaper.
  2. Klicka på fliken Enhetshanteraren .
  3. Utöka USB-styrenheter genom att klicka på pilen till vänster om den.
  4. Högerklicka på den första USB-rotnavsenheten och välj Egenskaper.
  5. Klicka på fliken Energisparfunktioner .
  6. Klicka ur boxen jämte Tillåt att datorn stänger av den här enheten för att spara ström.
  7. Klicka på OK för att godkänna inställningen.
  8. Upprepa stegen 4-7 om det finns fler enheter i avsnittet USB-styrenheter med "rotnav" i namnet.

Obs.: Du kan behöva koppla ur och återansluta USB-skärmadaptern efter dessa inställningar för att anslutningen ska fungera igen.

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

When you troubleshoot issues with a laptop docking station, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video destination

  • Laptop docking station

  • USB peripherals

  • Ethernet connection

To test your setup components, try the following:

  • Use the video cables, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, video source, video destination, laptop docking station, USB peripherals, and Ethernet connection setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.

  2. If you do not see the USB video adapter in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows.

  3. If the device is listed with an error, reinstall the drivers following the instructions on the website.

  4. Check to see if your video card drivers are current. You can check what video card you have in Device Manager under Display adapters. It is recommended that you go directly to the video card manufacturer's website to check for the latest drivers.

  5. Check to see if the monitor is being detected by Windows.

For more information about testing the USB peripherals and the laptop docking station, visit www.startech.com/faq/usb_hubs_general_troubleshooting.

When you test Ethernet and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/network_adapters_general_troubleshooting.

When you test sound and the laptop docking station, refer to the following FAQ: http://www.startech.com/faq/sound_cards_general_troubleshooting.

If hardware acceleration is enabled on any of your software applications, it can result in poor resource management and limit the performance of your video device. If you experience this problem, you should disable hardware acceleration in the program(s) that were impacted. 

To disable hardware acceleration in common applications and operating systems, complete one of the following series of steps, depending on what software application(s) or operating system that you are running.

Internet Explorer 9 and later

Note: Earlier versions of Internet Explorer do not use hardware acceleration.

  1. Click the Start button.
  2. Open Control Panel.
  3. Click Network and Internet.
  4. Click Internet Options.
  5. Click the Advanced tab.
  6. Browse to the Accelerated graphics screen.
  7. Select the Use software rendering instead of GPU rendering check box.
  8. Click Apply.
  9. Restart your computer.

Mozilla Firefox

  1. Open Firefox.
  2. Press the Alt key.
  3. Click Tools and Options.
  4. Click the Advanced icon.
  5. Click the General tab.
  6. Under Browsing, clear the Use hardware acceleration when available check box.
  7. Click the OK button.
  8. Restart your web browser.

Google Chrome

  1. Open Google Chrome.
  2. Click the Options icon (it has three horizontal lines on it).
  3. Click Settings.
  4. Click Show advanced settings.
  5. Scroll to the bottom of the screen and clear the Use hardware acceleration when available check box.
  6. Restart your web browser.

Microsoft Office 2013 / 2010

  1. Open any program in Microsoft Office (for example, Microsoft Word).
  2. Click the File tab.
  3. In the menu on the left side of the screen, click Options.
  4. Click Advanced.
  5. Under Display, select the Disable hardware graphics acceleration check box.
  6. Close and restart all of the Microsoft Office programs that you had open.

Windows 10 / 8

  1. Press the Windows key +X.
  2. Click Control Panel.
  3. Click Personalization.
  4. Select a high-contrast theme.

Windows 7 / Vista 

  1. Click the Start button.
  2. Click Control Panel.
  3. Click Personalization.
  4. Select a non-Aero theme. Ideally, you should select a basic and high-contrast theme.

Windows XP

  1. Click the Start button.
  2. Open the Control Panel.
  3. Select Display.
  4. Click the Settings tab.
  5. Click Advanced.
  6. Click the Troubleshooting tab.
  7. Move the Hardware Acceleration slider to None.
  8. Restart your computer.

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

Whether this device works with the Chrome OS™ operating system or not depends on the version of the Chrome OS operating system that you’re running and the model of the Chromebook™ notebook computer that you’re using.

Existing DisplayLink® enabled USB 3.0 products natively support Chrome OS build version R55 and later, but not all Chromebook notebook computers running build version R55 and later natively support DisplayLink. Support for DisplayLink is being rolled out to Chromebook notebook computers in a series of releases. To see the build version of the Chrome OS operating system that supports DisplayLink and corresponds to the model of the Chromebook notebook that you’re using, view the following knowledge base article on the DisplayLink website: http://support.displaylink.com/knowledgebase/articles/891030.

No, you cannot use this docking station to charge a connected laptop computer.

To see a list of laptop docking stations that can charge a connected laptop, refer to the following FAQ: https://www.startech.com/faq/laptop-docking-stations-will-charge-laptop.

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen