PCI Express (PCIe) Gigabit Ethernet-nätverkskortadapter för fiber med SC i multiläge - 550 m

Anslut en PCI Express-baserad stationär eller hyllmonterad PC direkt till ett fiberoptiskt Gigabit-nätverk med SC i multiläge

Produkt ID: PEX1000MMSC2

  • Maximal fiberavstånd på 550 m
  • Stöder auto-negotiation i full/halv duplex
  • Installationsfäste i lågprofil/halvhöjd medföljer
Ditt pris
€226,99 EUR excl. VAT
€283,74 EUR incl. VAT

PEX1000MMSC2 PCIe Gigabit-fibernätverkskortet låter dig ansluta en stationär PC direkt till ett fiberoptiskt nätverk genom att lägga till en fiberport med SC i multiläge till datorn eller servern genom en tillgänglig PCI Express-port.

Kortet är perfekt för integrering med ny eller befintlig fiberinfrastruktur över stora avstånd och ger full Gigabit-bandbredd till datorn upp till 550 meter bort från nätverkskällan med en SC-fiberkabel i multiläge med 50/125 µm duplex. För ännu större kompatibilitetsmöjligheter ger kortet dessutom fiberintegrering med en dator upp till 220 meter bort vid användning med nätverksramverk bestående av 62,5/125 µm multilägeskablage.

Med fiberanslutning blir inte ditt nätverk mottagligt för elektroniska störningar, vilket kan vara problematiskt hos nätverk med RJ45 koppar, och därför är detta fiberkort idealiskt för säkra nätverk.

Dessutom är kortet utrustat med ett standard profilfäste och ett medföljande fäste i lågprofil/halvhöjd, för enkel installation i datorer med liten formfaktor eller 1U server- och hyllmonterade tillämpningar.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Idealisk för pålitliga och säkra installationer - en direkt fiberanslutning innebär att man slipper elektromagnetiska störningar som kan vara ett problem med kopparbaserade nätverkskort
  • Perfekt för inbäddade industriella fjärrsystem för övervakning och videoövervakning med hög hastighet
  • Ge full Gigabit-bandbredd till en fjärrterminal över stora avstånd, förlänger en nätverksanslutning längre än vanligt kopparkablage

Fördelarna med StarTech.com

  • Infrastrukturer av fibernätverk är pålitliga och säkra utan elektromagnetiska störningar och mindre korrupt data, genom en direkt fiber-till-dator-anslutning
  • Passar i system i lågprofil eller liten formfaktor (SFF) med en design i dubbelprofil

Partnernummer

  • Ingram Micro Sweden V933244
  • ALSO Sweden 000000000002775840
  • UPC 065030857703

Kompatibilitet

  • Windows 8 logo
  • Windows 7 logo
  • Windows Server 2012 logo
  • Mac OS X Mavericks (10.9) logo
  • Linux logo
  • Windows 10 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
  • Windows Server 2019 logo
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS X® 10.5 till 10.9
Linux 2.4.x till 4.11.x Endast LTS-versioner
Microsoft Hyper-V®

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 49 mm [1,9 in]
Package Length 21,8 cm [8,6 in]
Package Width 17,1 cm [6,7 in]
Fraktvikt (förpackning) 0,2 kg [0,5 lb]
Hårdvara Portar 1
Gränssnitt Fiber Ethernet
Busstyp PCI Express
Korttyp Standardprofil (inkl. LP-fäste)
Industristandarder IEEE802.3z 1000BASE-SX, IEEE 802.1Q VLAN-taggning, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x flödesreglering i full duplex, RFC 1157 SNMP v1
Chipset-ID Realtek - RTL8168E
Marvell - 88E1111B1
Indikatorer LED-indikatorer 1 - Länk (grön)
1 - Aktivitet (gul)
Kontakt(er) Kontakttyp(er) 1 - PCI Express x1
Externa portar 1 - Fiberoptisk SC duplex
Miljö Drifttemperatur 0°C to 45°C (32°F to 113°F)
Förvaringstemperatur -20°C to 70°C (-4°F to 158°F)
Luftfuktighet 5~95 % RH (icke-kondenserande)
Mjukvara OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS X® 10.5 till 10.9
Linux 2.4.x till 4.11.x Endast LTS-versioner
Microsoft Hyper-V®
Prestanda Maximal dataöverföringshastighet 2000 Mbps (2 Gbps) - Full-Duplex
Buffertstorlek 48 KB
Kompatibla nätverk 1000 Mbps (1 Gbps)
Stöd för full-duplex Ja
Medeltid mellan fel (MTBF) 361.978 timmar
Ström Strömförbrukning 3.2W Max
Särskilda anmärkningar/krav Obs. Ej kompatibel med 10/100 Mbps
Utseende Kabinettyp Stål
Produktlängd 12 cm [4,7 in]
Produktbredd 18 mm [0,7 in]
Produkthöjd 11,8 cm [4,6 in]
Produktvikt 66 g [2,3 oz]
Vad det är i lådan Ingår i paketet 1 - PCI Express Gigabit fibernätverkskort med 1 port
1 - Lågprofilsfäste
1 - Drivrutin CD
1 - Instruktionsbok

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hur man

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen