10/100 Mbps Ethernet till USB 2.0 LPR-nätverksskrivarserver

Dela en standard USB-skrivare med flera användare över ett Ethernet-nätverk

Produkt ID: PM1115U2

  • Dela en enda USB-skrivare med flera användare över ett nätverk
  • Skriv ut från en dator på nätverket var som helst på kontoret
  • Ger en tillförlitlig Ethernet-anslutning med 10Base-T/100Base-TX automatisk avkänning
Ditt pris
€66,99 EUR excl. VAT
€83,74 EUR incl. VAT

Skrivarservern får plats i handflatan och gör det enkelt att dela en USB-skrivare med användare på ditt nätverk. Den är den idealiska lösningen för hemma- eller små kontorsnätverk.

Tillförlitliga, kostnadseffektiva nätverksutskrifter

Njut av kostnadseffektiva nätverksutskrifter för flera användare. 10/100 Mbps USB-skrivarservern låter dig dela en USB-skrivare med flera användare på ditt nätverk istället för att behöva köpa separata skrivare för varje individuell arbetsstation.

Placera din delade skrivare på en lämplig plats

Med webbaserad hantering kan du installera och övervaka skrivarserver genom en webbläsare så att du kan placera skrivaren på en lämplig delad plats - du behöver inte placera den jämte datorn. Du kan skicka utskriftsjobb till andra användare i hemmet eller på kontoret eller till och med till en skrivare i ett annat land.

Enkel att använda och att installera

Skrivarservern är kompakt och lätt och enkel att installera med dess tydliga installationsguider och webbaserade fjärrhantering. Du använder helt enkelt en USB-kabel för att ansluta skrivarservern till din skrivares USB-port och använder sedan en RJ45-nätverkskabel för att ansluta den till resten av nätverket.

Stöder LPR-nätverksutskrift och Bonjour Print Services

Skrivarservern stöder protokollet Line Printer Remote (LPR) som tillåter Internet-utskrifter. Den stöder dessutom Bonjour Print Services så att det blir enklare att hitta och konfigurera skrivare på ditt nätverk.

PM1115U2 täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Låter flera användare på ett Ethernet-nätverk dela en USB-skrivare
  • Är en tillförlitlig lösning för nätverksutskrifter i hemmet, på ett litet kontor, på utbildningsinstitutioner eller myndigheter och andra miljöer som behöver skrivardelning

Partnernummer

  • Ingram Micro Sweden V933617
  • ALSO Sweden 000000000002776112
  • UPC 065030855174

Kompatibilitet

  • Windows 7 logo
  • Windows 8 logo
  • Mac OS X Yosemite (10.10) logo
  • Windows Server 2012 logo
  • Windows 10 logo
Windows® XP, 7, 8 / RT, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS® 10.6 to 10.10

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 54 mm [2,1 in]
Package Length 21,5 cm [8,5 in]
Fraktvikt (förpackning) 326 g [11,5 oz]
Package Width 14,9 cm [5,9 in]
Hårdvara Portar 1
Industristandarder Kompatibelt med IEEE 802.3 10BASE-T och IEEE 802.3u 100BASE-TX
Chipset-ID EST - EST2862B
Indikatorer 1 - LED-indikatorer Ström
Länk
Aktivitet
Kontakt(er) 1 - Externa portar RJ-45
USB Type-A (4-stifts) USB 2.0
Miljö Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -10°C to 70°C (14°F to 158°F)
Luftfuktighet 10% ~ 90% RH
Mjukvara OS-kompatibilitet Windows® XP, 7, 8 / RT, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS® 10.6 to 10.10
Prestanda Maximal dataöverföringshastighet 100 Mbps
Maximalt avstånd 100 m / 330 ft
Fjärrhantering Ja
Auto MDIX Ja
Stöd för full-duplex Ja
Jumbo Frame Support 9K max.
Stödda protokoll LPR
Ström Power Source AC-adapter medföljer
Inspänning 100 - 240 AC
Inström 0.25
Utspänning 5 DC
Utström 1A
Polaritet på mittpol Positiv
Kontakttyp H
Strömförbrukning 2
Särskilda anmärkningar/krav System- och kabelkrav Skrivare med USB-anslutning
Kabel för USB-skrivare medföljer ej
Obs. OS-kompatibilitet syftar endast på medföljande mjukvara - skrivarservern själv kan användas utan mjukvara på de flesta plattformarna som stöder nätverksutskrifter
Utseende Färg Svart
Kabinettyp Av plast
Produktlängd 53 mm [2,1 in]
Produktbredd 54 mm [2,1 in]
Produkthöjd 23 mm [0,9 in]
Produktvikt 62 g [2,2 oz]
Vad det är i lådan 1 - Ingår i paketet USB 2.0 LPR-nätverksskrivarserver
universell strömadapter (NA/JP, UK, EU, ANZ)
RJ45-nätverkskabel
Snabbstartsguide
Programskiva

Tillbehör

RJ45PATCH10

Cat5e Patch Cable with Snagless RJ45 Connectors - 10 ft, Blue

Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
SVA5H2NEUA

DC-strömadapter - 5 V, 2 A

Byt ut din borttappade eller trasiga strömadapter

Ditt pris
€18,99 EUR excl. VAT
€23,74 EUR incl. VAT
45PATCH10GR

Cat5e Patch Cable with Snagless RJ45 Connectors - 10 ft, Gray

Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
RJ45PATCH15

15 ft Cat5e Blue Snagless RJ45 UTP Cat 5e Patch Cable - 15ft Patch Cord

Skapa snabba Ethernet nätverksanslutningar med denna högkvalitativa Cat5e-kabel med ström-över-Ethernet

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Inbyggd programvara

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

To add a printer from the print server to your Windows computer, you need to use the provided software to locate the print server on your network.

Hardware requirements

  • A wired Ethernet network with DHCP (automatically assigned IP addresses).
  • A compatible USB printer.
  • A computer running Windows.

Install the hardware

  1. Use a USB A-to-B cable to connect the USB printer to the PM1115U2.
  2. Use an Ethernet patch cable to connect the PM1115U2 to a wired Ethernet network (for example, a network switch, wall jack, and so on).
  3. Connect a power supply to the print server.

Install the software

  1. Navigate to http://www.startech.com/Support and download the latest software. You can find the part number and product ID on the product packaging.

Note: Windows typically saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. When the download is complete, right-click the zip folder that you downloaded, click Extract All, and follow the on-screen instructions.
  1. In the list of extracted files, right-click the Network Printer Wizard Setup 2017 with Window 8.exe file and click Run as Administrator.
  1. Follow the on-screen instructions to install the driver software.

Configure the software

After the Network Printer Wizard is installed on your system you can install the printer. To install the printer, complete the following:

  1. Open the Launch Network Printer Wizard.
  2. Click Next.
  3. Select the print server from the list and click Next.
  4. Select the appropriate driver for the printer and click Next. If you cannot find the driver, use a generic PCL5/PCL6/PS driver or obtain the driver from the manufacturer of your printer.
  5. Click Finish.

Verify the installation

  1. Open Control Panel.
  2. Navigate to Devices and Printers or Printers and Other Hardware.
  3. Right-click the installed printer and click Printer Properties.
  4. Click Print Test Page.

A printer test page should be sent to your printer.

If you are using applications that do not support print server software, you can use the web interface to configure the print server for your network. To access the web interface you need to determine the IP address of the PM1115U2. This device has Dynamic Host Configuration Protocol (DHCP) enabled by default, and will be assigned an IP address by your router when connected to your network. 

You can determine the IP address of the unit in one of the following ways:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

To access the print server web interface, complete the following:

  1. Make sure that the PM1115U2 is on the same network as your computer.
  2. In an Internet browser, enter the IP address of the unit.
  3. Click Login.
You can now access the print server configuration and make the necessary changes for it to work on your network.

In Windows 10, to add a printer to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Settings Devices > Bluetooth > Printers > Mouse > Add a printer The printer that I want isn't listed.
  3. Select the Add a local printer or network printer with manual settings check box, and click Next.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server, and click Next.
  7. Click CustomSettings > LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In Windows 8 and Windows 8.1, to add a printer to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Control Panel Hardware and Sound Devices and Printers Add a printer The printer that I want isn't listed.
  3. Select the Add a local printer or network printer with manual settings check box, and click Next.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server, and click Next.
  7. Click Custom > Settings > LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK > Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In Windows 7 and Windows Vista, to add a printer from the print server to your computer, you need to create a print server port.

Before you create the print server port, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Press the Windows key.
  2. Click Devices and Printers > Add a printer.
  3. Select the Add a local printer check box.
  4. Select Create a new port.
  5. Change the type of port to Standard TCP/IP Port, and click Next.
  6. In the Hostname or IP address field, enter the IP address of the print server.
  7. Click Next > Custom Settings LPR.
  8. Under LPR Settings, enter a Queue Name. The queue name can be any set of numbers or letters.
  9. Click OK Next.
  10. Select a driver from the list, and click Next.
  11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer.

In the Mac OS, to add a printer to your computer, you need to create a print server port.

Before you create the print server port in the Mac OS, you need to configure your print server for the network. For more information about how to configure your print server, refer to the following FAQ: https://www.startech.com/faq/print-servers-pm1115u2-alternate-setup

To create a print server port, complete the following:

  1. Click the Apple icon.
  2. Click System Preferences Printers & Scanners.
  3. At the bottom of the list of printers, click +.
  4. On the Add screen, click IP.
  5. In the Address field, enter the IP address of the print server.
  6. In the Protocol drop-down list, click Line Printer Daemon – LPD or LPR.
  7. To add the name and location of the print server, complete the Name and Location fields.
  8. In the Use drop-down list, select the driver for the print server.
  9. Click Add.

Problemsökning

This device has Dynamic Host Configuration Protocol (DHCP) enabled by default, and will be assigned an IP address by your router when connected to your network. 

You can determine the IP address of the unit in one of the following ways:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

To determine the IP address of the PM1115U2, do one of the following:

  • Use the Windows Network Printer Wizard to determine the IP address.
  • View the router's DHCP table to determine the IP address. The print server should be listed with a MAC address starting with 80:3F:5D.

 To access the print server web interface, complete the following:

  1. Make sure that the computer is on the same network as the PM1115U2. 
  2. In an Internet browser, enter the IP address of the PM1115U2.
  3. Click Login

To reset the print server to the default factory settings, complete the following:

  1. Turn on the print server and wait for it to start up. 
  2. Press and hold the Reset button for 10 seconds.
  3. Wait for the server to restart.

Hur man

The Ethernet port on a wireless network print server is intended to be used for configuration and to connect to an existing network infrastructure. You cannot connect an Ethernet port on a wireless network print server to the Ethernet port on a printer. The only supported method of connecting a printer to the print server is to use a USB A to B cable. These cables can be found on StarTech.com, in the USB 2.0 Cables section.

Compliance and safety

Compliance letters

  • WEEE
    • Språk: English
  • RoHS
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen