Mini PCI Express Gigabit Ethernet nätverksadapter NIC-kort

Lägg till en Gigabit RJ45-port genom en mini PCI express-kortplats

Produkt ID: ST1000SMPEX

  • En 10/100/1000 Mbps kompatibel RJ45 Ethernet-port
  • Helt kompatibel med specifikationerna IEEE 802.3, 802.3u och 802.3ab för anslutningar i 10/100/1000 Mbps
  • Stöd för jumboram upp till 9k
Ditt pris
€58,99 EUR excl. VAT
€73,74 EUR incl. VAT

ST1000SMPEX mini PCI express kortadaptern för Gigabit nätverk lägger till en 1000 Mbps nätverksanslutning till en mini PCI express-kapabel dator (PCI express mini card, mini PCIe) som t.ex. mini-ITX-moderkort.

Denna mini PCI express Gigabit-adapter stöder bl.a. NDIS5-kontrollsumma, LSO för lägre CPU-åtgång, Wake-On-LAN (WOL), fjärrväckning för strömhantering, jumboramar och VLAN-taggning och klarar av många olika situationer.

Denna mini PCIe-nätverksadapter av hög kvalitet är perfekt för inbyggda system eller system med liten formfaktor som inte klarar av Gigabit nätverk, eller för att lägga till en nätverksanslutning utan att använda en hel PCI express-kortplats och levereras med ett fäste i lågprofil/halvhöjd.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Lägg till en Gigabit nätverksport till ett mini-ITX-system med liten formfaktor och en mini PCI express-kortplats
  • Lägg till en Gigabit nätverksport till ett mini-ITX-system genom mini PCIe istället för en hel PCIe-kortplats
  • Ersättare för en trasig inbyggd Gigabit Ethernet-port

Fördelarna med StarTech.com

  • Mini PCI Express-formfaktorn av full längd (PCI express mini card, mini PCIe) passar i många mini ITX- eller inbyggda system
  • Inbyggd NDIS5-kontrollsumma, stöd för LSO och jumboramar minimerar systemets användning av resurser
  • Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support

Partnernummer

  • Ingram Micro Sweden V931854
  • UPC 065030846554

Kompatibilitet

  • Windows 8 logo
  • Windows Server 2012 logo
  • Linux logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.4.x och 10.5.x
Linux 2.4.x till 4.11.x Endast LTS-versioner

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 32 mm [1,3 in]
Package Length 17,5 cm [6,9 in]
Package Width 14,4 cm [5,7 in]
Förpackningsantal 1
Fraktvikt (förpackning) 150 g [5,3 oz]
Hårdvara Portar 1
Gränssnitt RJ45 (Gigabit Ethernet)
Busstyp Mini PCI Express
Korttyp Inbyggd
Industristandarder IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Chipset-ID Realtek - RTL8111E
Indikatorer 1 - LED-indikatorer Länk
Aktivitet
Kontakt(er) 1 - Kontakttyp(er) Mini PCI Express x1 (52-stifts)
1 - Externa portar RJ-45
Miljö Drifttemperatur 0°C to 55°C (32°F to 131°F)
Förvaringstemperatur -20°C to 85°C (-4°F to 185°F)
Luftfuktighet 5% ~ 95% RH
Mjukvara OS-kompatibilitet Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Mac OS® 10.4.x och 10.5.x
Linux 2.4.x till 4.11.x Endast LTS-versioner
Prestanda Kompatibla nätverk 10/100/1000 Mbps
Auto MDIX Ja
Stöd för full-duplex Ja
Promiscuous Mode Ja
Medeltid mellan fel (MTBF) 482765 Hours
Särskilda anmärkningar/krav System- och kabelkrav Tillgänglig mini PCI express-kortplats och utbyggnadskortplats
Utseende Kabinettyp Stål
Produktlängd 51 mm [2,0 in]
Produktbredd 30 mm [1,2 in]
Produkthöjd 8 mm [0,3 in]
Produktvikt 6 g [0,2 oz]
Vad det är i lådan 1 - Ingår i paketet Mini PCIe-kort
RJ45-instickskort
Lågprofilsfäste
Intern LED-kabel
Intern datakabel
Drivrutin CD
Instruktionsbok

Tillbehör

N6PATCH100GN

Cat6 patchkabel med hakfria RJ45-kontakter - 30,4 m, grön

Skapa ström-över-Ethernet-kompatibla gigabit-nätverksanslutningar

Ditt pris
€29,99 EUR excl. VAT
€37,49 EUR incl. VAT
C6PATCH1GN

Cat6-patchkabel med gjutna RJ45-kontakter - 30 cm - grön

Skapa ström-över-Ethernet-kompatibla gigabit-nätverksanslutningar

Ditt pris
€1,99 EUR excl. VAT
€2,49 EUR incl. VAT
WIRC6PATBLRL

Bulk Cat6 Ethernet Cable - 1000 ft. - Stranded - CM-Rated for In-Wall Use - Blue

Make Gigabit network connections using this high quality Cat6 Cable

Ditt pris
€257,99 EUR excl. VAT
€322,49 EUR incl. VAT
Ditt pris
€7,99 EUR excl. VAT
€9,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Problemsökning

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

Hur man

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

The drivers on our website include a Realtek Diagnostic Toolkit that you can use to easily set up a VLAN tag.

Make sure that you are logged in as the local administrator before continuing.

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Downloads). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the Realtek_PCI_GbE.zip file or the Realtek_PCIe_GbE.zip file.
  2. Select Extract All and note the location that the files will be extracted to.
  3. Select Extract. The extracted files will open automatically.
  4. In the list of extracted files, do one of the following:
  • If you are running Windows Vista/7/8, right-click the Setup.exe file and select Run as Administrator.
  • If you are running Windows XP, double-click the Setup.exe file.
  1. Follow the on-screen instructions to install the software.
  2. Open the software and under the VLAN settings, you can add, delete, or modify the VID (VLAN ID).

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen