Produkt ID: US1GC30B
Lägg omedelbart till en Gigabit Ethernet-nätverksanslutning till datorn genom med en USB-C till Gigabit Ethernet-adapter med antingen USB Type-C™- eller Thunderbolt™ 3-porten på din dator.
USB-C till LAN-adaptern stöder full Gigabit-bandbredd genom att utnyttja prestandan från USB 3.1 Gen 1 (5 Gbit/s). Du kan nå väldigt stora filer över nätverket med nätverkshastigheter på 10/100/1000 Mbit/s med stöd för avlastning av kontrollsumma (IPv4, IPv6, TCP, UDP) och avlastning av stora överföringar/mottagningar.
Ger omedelbart Gigabit-hastigheter via USB-C- eller Thunderbolt 3-porten på din enhet utan att du behöver ett inbyggt Ethernet-kort i enheten.
Koppla helt enkelt in nätverksadaptern i USB-C-porten på din bärbara dator och anslut till ditt nätverk. Adapterns Realtek® RTL8153-chipset har inbyggt stöd för drivrutiner i Chrome OS™, macOS och Windows®.
Denna bärbara USB Gigabit-nätverksadapter är den idealiska nätverksadaptern eller tillbehöret för bärbara datorer som kräver mer flexibilitet. Den strömförses direkt från USB-porten så att den är enkel att ansluta när du är på väg.
Våra USB nätverksadaptrar gör det enkelt att lägga till en trådbunden nätverksanslutning till din bärbara/stationära dator eller surfplatta. Om din enhet har en ledig USB-port så kan vår kompakta USB-nätverksadapter hjälpa dig att ansluta. USB Type-C till Ethernet-adaptern stöds av 2 års garanti och gratis, livstids Nordamerikabaserad teknisk support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Förpackning | Package Height | 30,0 mm [1,2 in] |
Package Length | 14,5 cm [5,7 in] | |
Fraktvikt (förpackning) | 88,0 g [3,1 oz] | |
Package Width | 17,1 cm [6,7 in] | |
Hårdvara | Portar | 1 |
Gränssnitt | RJ45 (Gigabit Ethernet) | |
Busstyp | USB 3.1 Gen 1 | |
Industristandarder | IEEE 802.3, 802.3u och 802.3ab | |
Chipset-ID | Realtek - RTL8153 | |
Kontakt(er) | 1 - Kontakttyp(er) | USB Type-C (24-stifts) USB 3.0 (5Gbps) |
1 - Externa portar | RJ-45 | |
Miljö | Drifttemperatur | 0°C to 45°C (32°F to 113°F) |
Förvaringstemperatur | -10°C to 70°C (14°F to 158°F) | |
Luftfuktighet | 5% ~ 90% RH | |
Mjukvara | OS-kompatibilitet | Windows® XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2016, 2019 Mac OS X® 10.7 till 10.15 VLAN-taggning stöds för närvarande inte i Mac OS Linux Kernel 2.6.25 till 4.11.x Endast LTS-versioner ChromeOS |
Prestanda | Maximal dataöverföringshastighet | 5 Gbps (USB 3.0) 2 Gbps (Ethernet - full-duplex) |
Typ och hastighet | USB 3.0 - 5 Gbit/s | |
Kompatibla nätverk | 10/100/1000 Mbps | |
Auto MDIX | Ja | |
Stöd för full-duplex | Ja | |
Ström | Power Source | Strömförsörjd via USB |
Särskilda anmärkningar/krav | System- och kabelkrav | Ledig USB Type-C-port |
Utseende | Produktlängd | 21,0 cm [8,3 in] |
Form Factor | Inbyggd kabel | |
Produktvikt | 22,0 g [0,8 oz] | |
Färg | Svart | |
Kabinettyp | Av plast | |
Produktbredd | 25,0 mm [1,0 in] | |
Produkthöjd | 15,0 mm [0,6 in] | |
Vad det är i lådan | 1 - Ingår i paketet | USB-C till GbE-nätverksadapter |
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test your cables, it is recommended that you do the following:
When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:
Sometimes an on-board network interface card (NIC) conflicts with a new NIC. In these cases it is best to disable the on-board NIC.
The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible. To do this, consult your motherboard manual.
You can also disable any NIC in Windows. Here is how you do this:
First click Start, or, in Windows 10 and 8, hold down the Windows key and press X. Then click Control Panel.
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.
Note: You must log in as the local administrator before you continue.
To open Device Manager:
If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:
To confirm that Windows detects your USB device, complete the following:
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
USB-C is a type of USB connector that is capable of supporting the following:
If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.
Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers.