USB-C till Gigabit-nätverksadapter med PD-laddning

Anslut till ett GbE-nätverk genom din bärbara dators USB-C-port och ladda medan du arbetar med Power Delivery

Produkt ID: US1GC30PD

  • Lägg till en Gigabit Ethernet RJ45-port till din USB-C-kapabla enhet för tillförlitlig nätverksanslutning
  • Stöder USB Power Delivery 2.0 för att strömförse och ladda din bärbara dator och nätverksadapter vid användning med din bärbara dators USB-C-baserade strömadapter
  • Bärbar nätverksadapter i resestorlek, idealisk för mobil användning
Ditt pris
€65,99 EUR excl. VAT
€82,49 EUR incl. VAT

Nu kan du lägga till en trådad nätverksanslutning till din USB-C-kapabla bärbara dator, surfplatta eller stationära dator. Denna USB-C till Ethernet-adapter är idealisk för mobil användning och ansluts i din USB-C- eller Thunderbolt™ 3-port för att ge trådad nätverksåtkomst. Och du kan ladda din bärbara dator medan du arbetar. Det är det perfekta tillbehöret för din MacBook, ChromeBook Pixel™, Dell™ XPS 12 eller annan enhet.

Få åtkomst till tillförlitliga Gigabit-nätverksanslutningar

Ge din bärbara dators USB-C-port fler möjligheter genom en trådad Internet-anslutning i stort sett var du än är. USB-C-nätverksadapter ansluts till din USB-C-port för att ge en tillförlitlig Gigabit Ethernet-anslutning. Den stöder full Gigabit-bandbredd genom att utnyttja prestandan från USB 3.0 (5 Gbps), även känt som USB 3.1 Gen 1, så att du snabbt kan nå stora filer över nätverket. Du kan ansluta till ett nätverk på platser där Wi-Fi® inte är tillgängligt eller opålitligt, som till exempel i klassrum, på kontor och hotell.

Strömförse och ladda medan du arbetar

Med USB-C-nätverksadaptern kan du strömförse och ladda din bärbara dator medan du arbetar.  Adaptern stöder Power Delivery 2.0, så istället för att bära på flera strömadaptrar kan du använda din bärbara dators USB-C-strömadapter för att strömförse både din bärbara dator och nätverksadaptern. Obs.: se till att din bärbara dators USB-C-baserade strömadapter stöder USB Power Delivery 2.0.

Kompakt och lätt för perfekt bärbarhet

Denna USB-C Gigabit-nätverksadapter är kompakt och bärbar och är den idealiska nätverksadaptern för stationära datorer eller tillbehör för bärbara datorer. Den strömförses direkt från USB-porten så att den är enkel att ansluta när du är på väg.

Inbyggt stöd för drivrutiner gör installationen enkel

Denna Gigabit Ethernet-nätverksadapter (GbE) ger en tillförlitlig nätverksanslutning utan att behöva installera drivrutiner. Den är redo att köra - nätverksadapterns chipset ger inbyggt stöd för drivrutiner för att garantera en snabb installation. Koppla helt enkelt in adaptern i USB-C-porten på din bärbara dator och anslut till ditt nätverk.

US1GC30PD täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Idealisk för mobila proffs som behöver trådade nätverksanslutningar
  • Nå ett trådat nätverk på platser där Wi-Fi® inte är tillgängligt eller opålitligt, som till exempel i klassrum, på kontor och hotell
  • Ladda din bärbara dator och din nätverksadapter samtidigt med hjälp av din bärbara dators USB-C-strömadapter

Partnernummer

  • Ingram Micro Sweden V933983
  • ALSO Sweden 000000000002903146
  • UPC 065030867764

Kompatibilitet

  • Windows 10 logo
  • Chrome OS logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • Windows Server 2019 logo
  • Windows Server 2016 logo
  • macOS High Sierra (10.13) logo
  • macOS Catalina (10.15) logo
  • macOS Big Sur (11.0) logo
Windows® 10
Windows Server® 2016, 2019
Mac OS X® 10.11 till 10.15 VLAN-taggning stöds för närvarande inte i Mac OS

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 32 mm [1,3 in]
Package Length 17,4 cm [6,9 in]
Fraktvikt (förpackning) 113 g [4,0 oz]
Package Width 14,7 cm [5,8 in]
Hårdvara USB-C-enhetsport(ar) USB Power Delivery
USB-C-värdanslutning Ja
Snabbladdningsport(ar) Nej
Portar 1
Gränssnitt USB 3.0
Busstyp USB 3.0
Gränssnitt RJ45 (Gigabit Ethernet)
Industristandarder IEEE 802.3, 802.3u och 802.3ab
Chipset-ID Realtek - RTL8153
Indikatorer 1 - LED-indikatorer Länk (grön)
Aktivitet (gul)
Kontakt(er) 1 - Kontakttyp(er) USB Type-C (24-stifts) USB 3.0 (5Gbps)
Endast USB-C (24-stifts) USB Power Delivery
RJ-45
Miljö Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 5% ~ 90% RH
Mjukvara OS-kompatibilitet Windows® 10
Windows Server® 2016, 2019
Mac OS X® 10.11 till 10.15 VLAN-taggning stöds för närvarande inte i Mac OS
Prestanda Maximal dataöverföringshastighet 5 Gbps (USB 3.0)
2 Gbps (Ethernet - full-duplex)
Typ och hastighet USB 3.0 - 5 Gbit/s
UASP-stöd Ja
Flödeskontroll Flödesreglering i full-duplex
Kompatibla nätverk 10/100/1000 Mbps
Auto MDIX Ja
Stöd för full-duplex Ja
Jumbo Frame Support 9K max.
Särskilda anmärkningar/krav System- och kabelkrav Ledig USB Type-C-port - USB 3.0 (5 Gbps) (för att se till att nätverksadaptern strömförser och laddar din bärbara dator måste din bärbara dators USB-C-port ha stöd för USB Power Delivery 2.0)
Valfri: USB-C-strömadapter (till exempel din bärbara dators USB-C-baserade strömadapter)
Obs. Adapterns USB-C-port är endast för USB Power Delivery. Den stöder inte DisplayPort alt-läge eller dataöverföringar.
Inte alla USB-C-portar har stöd för USB Type-C-standardens alla funktioner. Se till att din bärbara dators USB-C-port stöder USB Power Delivery 2.0
Adaptern kan ansluta till en bärbar värddators USB-C-port som inte stöder USB Power Delivery 2.0. Men om en strömadapter är ansluten till hubben i denna konfiguration kommer den inte att föra över ström till din bärbara värddator.
USB 3.0 är även känt som USB 3.1 Gen 1; denna anslutningsstandard ger hastigheter på upp till 5 Gbps.
Ström Power Source Strömförsörjd via USB
Power Delivery 60W
Utseende Färg Svart
Kabinettyp Av plast
Kabellängd 12 mm [0,5 in]
Produktlängd 0 mm [0,0 in]
Produktbredd 40 mm [1,6 in]
Produkthöjd 17 mm [0,7 in]
Produktvikt 34 g [1,2 oz]
Vad det är i lådan 1 - Ingår i paketet USB-C-adapter
snabbstartsguide

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Drivrutin(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Problemsökning

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Your laptop might not support Power Delivery or might have specific charging requirements. For example, if your laptop requires exactly 60W of power and an adapter consumes some of the 60W, your laptop might not recognize that it is getting enough power.

For more information about Power Delivery, refer to the manufacturer of your hardware.

Hur man

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Before You Buy

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

Compliance and safety

Compliance letters

  • RoHS
    • Språk: English
  • WEEE
    • Språk: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen