1U Vertical Server Rack Cable Management D-Ring Hook - 2.2x3.9in (5.7x10cm)

Add a cable management hook to your server rack or cabinet for strain relief and organization

Produkt ID: CMHOOK1U

  • 2.2 x 3.9in (5.7 x 10cm) Cable management D-Ring
  • 1U Bracket can be mounted to any standard rack post
  • TAA compliant for GSA Schedule purchases
Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT

The CMHOOK1U Vertical Cable Management D-ring lets you add a 1U metal cable hook to your server rack or cabinet to provide an organized channel for your cables. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.

Constructed of high-quality steel, the cable D-ring measures 2.2 x 3.9in (5.7 x 10cm) and offers a flexible opening for easy insertion of bundled cables. Providing strain relief for attached cables, multiple cable rings can be attached to your rack where you need them for a versatile cable management solution.

Please see our other cable management D-ring products for different size configurations:
1U Cable Management D-ring - 2.2 x 5.9in (5.7 x 15cm) - CMHOOK1UL
1U Cable Management D-ring - 1.8 x 3.9in (4.5 x 10cm) - CMHOOK1UN

Backed by a StarTech.com 2-year warranty.

Användning

  • Use with server racks and cabinets, structured wiring closets and network distribution cabling to keep cables neat and tidy

Fördelarna med StarTech.com

  • Route cables neatly through your rack with an easy to install cable management ring
  • Increase the longevity of your server and networking equipment interfaces by providing cable strain relief

Partnernummer

  • Ingram Micro Sweden V932916
  • UPC 065030852869

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 46 mm [1,8 in]
Package Length 22,5 cm [8,9 in]
Fraktvikt (förpackning) 0,1 kg [0,2 lb]
Package Width 12,5 cm [4,9 in]
Förpackningsantal 1
Hårdvara Inpassning Vertical
U-höjd 1U
Industristandarder EIA RS310-D
Utseende Produktvikt 78 g [2,8 oz]
Färg Svart
Kabinettyp Stål
Inre bredd 50.6
Inre djup 92.6
Produktlängd 10,1 cm [4,0 in]
Produktbredd 57 mm [2,2 in]
Produkthöjd 4,5 cm [1,8 in]
Vad det är i lådan Ingår i paketet 1 - 2.2x3.9in (5.7x10cm) Cable Management Hook

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

When you install your rack equipment, it’s important to put the heaviest equipment on the bottom of the rack, first.  This provides a strong base and is especially important if you are installing a lot of equipment on a tall rack.  This also prevents the server rack from becoming top heavy and falling over.

If your equipment is long, heavy, unbalanced or otherwise difficult to handle, ask someone to help you install the equipment so you don’t injure yourself or damage the equipment.

Finally, when you tighten down your screws make sure you don’t strip or damage the screws.  This is especially important to be aware of when using electric tools which can generate more torque.

The patch panel will be mounted using cage nuts, so the first step is to install them. 

Once installed, the cage nuts can be used to mount our patch panel. 

To install your server rack equipment, fasten the mounting screws into the cage nuts. After you tighten your screws, check to make sure your rack equipment is securely installed.

If you have questions about installing equipment into a server rack, contact our technical support team for further assistance. 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen