12U utskjutbart serverrack - Roterande - 4-stolpsrack

Förvara din server- och nätverksutrustning i ett utskjutbart rack med öppen ram som kan snurras runt för lätt åtkomst

Produkt ID: PORACK12U

  • Hantera enkelt din rackmonterade utrustning tack vare den utskjutbara designen
  • Levereras i platt förpackning vilket underlättar transport och minskar fraktkostnader
  • Utrustningen kyls passivt via den öppna ramkonstruktionen
Ditt pris
€674,99 EUR excl. VAT
€843,74 EUR incl. VAT

Spara utrymme med det här utskjutbara 12U-serverracket samtidigt som du håller din rackmonteringsutrustning organiserad och lättillgänglig. Den kompakta och öppna konstruktionen är lätt att dra ut och rotera, vilket underlättar åtkomst till din utrustning vid installation och underhåll.

Racket tål en totalvikt på 56 kg.

Spara plats i kontoret eller i serverrummet

Spara värdefull golvyta. Konstruerat för installation i små utrymmen, t.ex. under bord eller i skåp. Mångsidigheten gör det till det perfekta stället att lagra dina servrar i styrelserum, kontor / hemmakontor, restaurang eller annan plats där utrymmet är en prioritet.

Håll din utrustning sval och lättillgänglig

För enkel installation och underhåll av utrustning är 12U-serverrackets underdel monterad på glidskenor så att du lättare ska komma åt din utrustnings baksida. Tack vare den öppna ramkonstruktionen underlättar racket inte bara åtkomsten utan ger även obehindrat luftflöde för passiv kylning av din rackmonterade utrustning för bästa prestanda.

Spara pengar på frakt

Racket levereras i en platt låda vilket minskar fraktvolymen och sänker kostnaderna väsentligt jämfört med rack som levereras färdigmonterade. Lätt att transportera och förvara tack vare den praktiska förpackningen.

PORACK12U täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

  • Hållbar lagring för rackmonterade servrar, KVM-switchar och nätverksutrustning
  • Lämplig för rackmonterad utrustning när säkerhet på racknivå inte behövs
  • Hyllmontering av A/V-utrustning i en radio- eller TV-studio

Partnernummer

  • Ingram Micro Sweden V934232
  • UPC 065030873949

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Fraktvikt (förpackning) 26,6 kg [58,5 lb]
Platt paket (montering krävs) Ja
Package Length 62,5 cm [24,6 in]
Package Width 55 cm [21,7 in]
Package Height 220 mm [8,7 in]
Hårdvara Väggmonterbar Nej
Profil monteringsskenor L-Shape
Specialfunktioner Inbyggd kabelhantering
Enkel montering
U-markeringar
Mounting Hole Types Kvadrat (för burmutter)
Hylltyp 4 stag
U-höjd 12U
Ramtyp Öppen ram
Industristandarder EIA/ECA-310-E
Prestanda Weight Capacity 56690
Product Measurements Produktlängd 56,8 cm [22,4 in]
Produktbredd 487 mm [19,2 in]
Produkthöjd 61,5 cm [24,2 in]
Produktvikt 23350 g [823,6 oz]
Maximalt monteringsdjup 425
Utseende Construction Material Stål
Färg Svart
Vad det är i lådan Ingår i paketet 1 - utskjutbar bricka
1 - Toppfäste
6 - vertikala skenor
1 - stabiliseringsplatta
1 - säkerhetsplatta
4 - smala kabelhållare
1 - kabelhanterare
2 - tumskruvar
24 - monteringsskruvar
24 - monteringsskruvar
48 - M5 korgmuttrar
48 - M5-skruvar
1 - Användarhandbok

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

In this video, guidelines and best practices will be discussed for constructing server racks.  Constructing a new server rack can be a bit daunting, but there are some general guidelines that you can use when you assemble most of the server racks StarTech.com sells.  Let’s have a look at the guidelines.

Before You Begin

  1. Make sure there’s enough room where you will be building.
  2. If you intend to move the rack, make sure it will fit through any doors or hallways.

While Building

  1. Make sure that you have all of the parts listed in the manual.
  2. Make sure that you have all of the tools that you will need.
  3. Assemble the rack in the correct order, according to your manual.

After Building

  1. Double-check that everything is where it should be and then tighten everything down.
  2. Be careful not to strip screws.
  3. Install casters and any server rack accessories.

Now that you have reviewed the guidelines, you can begin assembling the server rack.

It is advised to take all of the parts out of the box and ensure they match up with the parts outlined in the manual.

You should also make sure that you have all of the tools that you need. 

First, the adjustable beams should be assembled. 

On this server rack, these adjustable beams control the depth of our rack and are marked with Index numbers.  The Index numbers allows you to set the depth of your rack, based on your equipment. Make sure that you choose the same Index numbers for all of the adjustable beams.  You can use the measurement chart in the manual for reference.

As you screw in your first screws, it is a good idea to only tighten them finger tight. That way, if you need to unscrew anything, you can do so easily. 

You should now have your adjustable beams together.

You will now use the beams to line up one set of left and right vertical rails and the top and base brackets.  It is often easiest to build the rack on its side.

There are a few important things that you should check for at this point in the assembly:

  • Make sure that the numbers on the adjustable beams and vertical rails are facing the right way
  • Make sure that you refer to the manual for the fastening pattern as this is crucial to the rack’s stability once it is assembled.  The same fastening pattern will be used for the other corners of the server rack.  For this rack, you can see that the screw is going through the top or base bracket, then the vertical rail, and then into the adjustable beam, in that order.  This is essential and will be the same for all of your corners.

The two adjustable beams, two of the vertical rails, and the top and base brackets should all be in place now.   You can now attach the other two vertical rails and our final two adjustable beams.

It’s time to double check that everything is in the right place before you tighten all of the screws.  Make sure that the numbers on your beams are all facing in the correct direction, the fastening pattern for each corner is correct, and that all of the cable guides are facing in the same direction.

Once you are sure that everything is correct, you can go ahead and tighten your screws, remember to be careful not to strip them.

Now that your rack is fully assembled, you can attach the casters and server rack accessories.  Note that all of your casters and server rack accessories should be installed facing in the same direction.  You may find it easier to invert the server rack to install the casters.

As you can see, rack builds are fairly straightforward as long as you take your time.  If you experience issues in setting up your StarTech.com server rack, contact the technical support team for further assistance. 

This video is about cage nuts and describes how to install and remove them, and how to identify if your product includes cage nuts.

You may have heard of cage nuts and wondered what they are and how they are used.  Today we are going to discuss cage nuts and show you some of their advantages and uses.

Cage nuts are used to mount IT equipment in server racks, such as the StarTech.com 4POSTRACK25U.  Server racks compatible with cage nuts can be easily identified by the square holes the cage nuts use. Cage nuts are great for protecting your equipment from stripped threads and allow for convenient mounting of your server rack equipment.

A cage nut houses a standard nut in a cage with a spring.  The cage has two wings that can be pinched together to allow the cage nut to be inserted into a square hole.  The wings are then released to hold the cage nut in place.  Cage nuts come in many sizes but M5 and M6 cage nuts are mainly used in IT environments.  M6 is a heavier, more robust cage nut that M5.

Let’s take a look at mounting a Cage Nut on a rail in the StarTech.com 4POSTRACK25U.

In some situations, you may be advised to use a slot screwdriver to help install cage nuts.  However, you will find it much easier to use a cage nut mounting tool.

To install a cage nut, use your tool to attach one of the wings from the cage nut.  Keep the pressure on the cage nut with your finger and then attach the other wing.  The cage nut is now ready for the mounting screw.

To uninstall a cage nut, use your tool to release the cage nut wing on one side and then the other side.

You can check to see if your StarTech.com product includes cage nuts by navigating to the StarTech.com website, searching for the product, and checking the Technical Specifications tab under the heading What’s in the Box.

StarTech.com also sells cage nuts and screws in both M5 and M6 sizes which can be seen by navigating to Server Rack Accessories and the section Mounting Screws and Cage Nuts.

When you install your rack equipment, it’s important to put the heaviest equipment on the bottom of the rack, first.  This provides a strong base and is especially important if you are installing a lot of equipment on a tall rack.  This also prevents the server rack from becoming top heavy and falling over.

If your equipment is long, heavy, unbalanced or otherwise difficult to handle, ask someone to help you install the equipment so you don’t injure yourself or damage the equipment.

Finally, when you tighten down your screws make sure you don’t strip or damage the screws.  This is especially important to be aware of when using electric tools which can generate more torque.

The patch panel will be mounted using cage nuts, so the first step is to install them. 

Once installed, the cage nuts can be used to mount our patch panel. 

To install your server rack equipment, fasten the mounting screws into the cage nuts. After you tighten your screws, check to make sure your rack equipment is securely installed.

If you have questions about installing equipment into a server rack, contact our technical support team for further assistance. 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen