Wall-Mount Server Rack - 4U

Vertically mount your server or networking equipment to a wall, in this low-profile cabinet

Produkt ID: RK419WALVO

  • Includes optional 4U steel plate that allows rack to be used as a wall case/shelf for any non-rackmount equipment
  • Wall mounting holes are 16” center to center for greater stability, and mounting to standard wall studs
  • TAA compliant for GSA Schedule purchases
Ditt pris
€236,99 EUR excl. VAT
€296,24 EUR incl. VAT

The RK419WALVO 4U 19-inch Steel Side Mount Rack is a Wall Mountable 4U solid steel rack, providing a robust solution for mounting your telecom, network or server equipment. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.

This server rack can be mounted in a server room, office, or above a doorway in rooms lacking the floor space for a full-size rack, expanding your workspace and keeping your equipment easily accessible.

The rack is constructed to EIA-RS310 standards and allows equipment to be mounted vertically - non-rackmount equipment can be installed using the rack as a wall case.

The bracket mounting holes (used to mount to a wall or the desk underside) are positioned at exactly 16-inches apart, matching standard construction stud measurements for easy installation.

Backed by a StarTech.com Lifetime warranty.

Användning

  • Mount servers and telecommunication equipment flush against the wall
  • Perfect for installing network switches out of the way and high up on a wall in a branch office, warehouse, or retail supercenter
  • Install a blade server anywhere in an office without a full server room
  • Ideal for small and medium businesses requiring small rack solutions dispersed throughout the organization

Fördelarna med StarTech.com

  • Versatile installation options for side mounting standard rack mount equipment, or vertically mounting any equipment
  • Rack depth allows for the mounting of equipment previously impossible in a small form factor rack, such as deep servers and high power PCs
  • Side panels protect your equipment while leaving the top and bottom open for easy access to LEDs, configuration buttons and cabling

Partnernummer

  • UPC 065030841832

Specifikationer

Warranty Information Warranty Lifetime
Förpackning Package Height 233 mm [9,2 in]
Package Length 57,6 cm [22,7 in]
Fraktvikt (förpackning) 11,9 kg [26,2 lb]
Package Width 54 cm [21,3 in]
Platt paket (montering krävs) Nej
Hårdvara Specialfunktioner Ships Fully Assembled
Profil monteringsskenor L-Shape
Specialfunktioner Kan monteras på väggen
Mounting Hole Types Kvadrat (för burmutter)
Industristandarder EIA/ECA-310-E
Hylltyp 2 stag
U-höjd 4U
Ramtyp Inneslutet skåp
Väggmonterbar Ja
Prestanda Weight Capacity 27700
Product Measurements Produktvikt 10000 g [352,7 oz]
Inre bredd 496
Inre djup 496
Produktlängd 55,8 cm [22,0 in]
Produktbredd 504 mm [19,8 in]
Produkthöjd 20,9 cm [8,2 in]
Maximalt monteringsdjup 480
Utseende Färg Svart
Vad det är i lådan Ingår i paketet 1 - RK419WALVO 4U väggmonterat rack
16 - # 10-32 skruvar
16 - # 10-32 korgmuttrar

Tillbehör

CABSCREWM6

50-pack M6-monteringsskruvar och korgmuttrar för serverskåp

Montera server, telecom och A/V-utrustning med dessa monteringsskruvar och muttrar i hög kvalitet

Ditt pris
€58,99 EUR excl. VAT
€73,74 EUR incl. VAT
CABSCREWS

50 Pkg M5 Mounting Screws for Server Rack Cabinet

Mount server, telecom and A/V equipment with these high quality screws

Ditt pris
€27,99 EUR excl. VAT
€34,99 EUR incl. VAT
CABCAGENUTS

50 Pkg M5 Cage Nuts for Server Rack Cabinets

Mount server, telecom and A/V equipment with these high quality nuts

Ditt pris
€23,99 EUR excl. VAT
€29,99 EUR incl. VAT
CABLMANAGER2

1U 19" hyllmonterbar kabelhanteringspanel i metall

Organisera och hantera nätverks-, server- och KVM-kablage i din serverhylla

Ditt pris
€40,99 EUR excl. VAT
€51,24 EUR incl. VAT
CABCAGENT62B

M6-korgmuttrar - 100-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€46,99 EUR excl. VAT
€58,74 EUR incl. VAT
CABCAGENTS62

M6-korgmuttrar - 100-pack

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€46,99 EUR excl. VAT
€58,74 EUR incl. VAT
CABCAGENUT2B

M5-korgmuttrar - 100-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€46,99 EUR excl. VAT
€58,74 EUR incl. VAT
CABCAGENUT6B

M6-korgmuttrar - 50-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€39,99 EUR excl. VAT
€49,99 EUR incl. VAT
CABCAGENUTS2

M5-korgmuttrar - 100-pack

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€53,99 EUR excl. VAT
€67,49 EUR incl. VAT
CABCAGENUTS6

50 Pkg M6 Cage Nuts for Server Rack Cabinet

Install your rack-mountable hardware securely with these high quality cage nuts

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
CABCAGENUTSB

M5-korgmuttrar - 50-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa korgmuttrar av hög kvalitet

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
CABSCREWM5

50-pack M5-monteringsskruvar och -korgmuttrar för serverskåp

Installera din hyllmonterbara hårdvara säkert med dessa skruvar och muttrar av hög kvalitet

Ditt pris
€51,99 EUR excl. VAT
€64,99 EUR incl. VAT
CABSCREWM52

100-pack M5-monteringsskruvar och -korgmuttrar för serverskåp

Installera din hyllmonterbara hårdvara säkert med dessa skruvar och muttrar av hög kvalitet

Ditt pris
€96,99 EUR excl. VAT
€121,24 EUR incl. VAT
CABSCREWM52B

M5x12 mm - skruvar och korgmuttrar - 100-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar och muttrar av hög kvalitet

Ditt pris
€99,99 EUR excl. VAT
€124,99 EUR incl. VAT
CABSCREWM5B

M5x12 mm - skruvar och korgmuttrar - 50-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar och muttrar av hög kvalitet

Ditt pris
€52,99 EUR excl. VAT
€66,24 EUR incl. VAT
CABSCREWM62

100-pack M6-monteringsskruvar och korgmuttrar för serverskåp

Installera din hyllmonterbara hårdvara säkert med dessa skruvar och muttrar av hög kvalitet

Ditt pris
€101,99 EUR excl. VAT
€127,49 EUR incl. VAT
CABSCREWM62B

M6x12 mm - skruvar och korgmuttrar - 100-pack, svart

Dessa M6x12 mm skruvar och korgmuttrar av hög kvalitet gör det enkelt att montera utrustning i din serverhylla eller i ditt serverskåp

Ditt pris
€105,99 EUR excl. VAT
€132,49 EUR incl. VAT
CABSCREWM6B

M6x12 mm - skruvar och korgmuttrar - 50-pack, svart

Dessa M6x12 mm skruvar och korgmuttrar av hög kvalitet gör det enkelt att montera utrustning i din serverhylla eller i ditt serverskåp

Ditt pris
€56,99 EUR excl. VAT
€71,24 EUR incl. VAT
CABSCREWSB

M5x12 mm - monteringsskruvar - 50-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar av hög kvalitet

Ditt pris
€29,99 EUR excl. VAT
€37,49 EUR incl. VAT
CABSCREWSM5

M5x12 mm - monteringsskruvar - 100-pack

Installera din hyllmonterbara hårdvara säkert med dessa skruvar av hög kvalitet

Ditt pris
€53,99 EUR excl. VAT
€67,49 EUR incl. VAT
CABSCREWSM5B

M5x12 mm - monteringsskruvar - 100-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar av hög kvalitet

Ditt pris
€53,99 EUR excl. VAT
€67,49 EUR incl. VAT
CABSCREWSM6

50 Pkg M6 Mounting Screws for Server Rack Cabinet

Install your rack-mountable hardware securely with these high quality screws

Ditt pris
€30,99 EUR excl. VAT
€38,74 EUR incl. VAT
CABSCREWSM6B

M6x12 mm - monteringsskruvar - 50-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar av hög kvalitet

Ditt pris
€30,99 EUR excl. VAT
€38,74 EUR incl. VAT
CABSCRWSM62B

M6x12 mm - monteringsskruvar - 100-pack, svart

Installera din hyllmonterbara hårdvara säkert med dessa skruvar av hög kvalitet

Ditt pris
€55,99 EUR excl. VAT
€69,99 EUR incl. VAT
C6PANEL24

1U hyllmonterbar Cat 6 110 patchpanel med 24 portar

Organisera upp till 24 Cat6-patchkablar

Ditt pris
€72,99 EUR excl. VAT
€91,24 EUR incl. VAT
PANELHU24

24 Port 0.5U Cat5e Patch Panel - RJ45 Ethernet Rackmount Cat 5e 110 Patch Panel

Organize up to 24 Cat5e patch cables using only 0.5U of rack space

Ditt pris
€56,99 EUR excl. VAT
€71,24 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Diagram:

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

This video is about cage nuts and describes how to install and remove them, and how to identify if your product includes cage nuts.

You may have heard of cage nuts and wondered what they are and how they are used.  Today we are going to discuss cage nuts and show you some of their advantages and uses.

Cage nuts are used to mount IT equipment in server racks, such as the StarTech.com 4POSTRACK25U.  Server racks compatible with cage nuts can be easily identified by the square holes the cage nuts use. Cage nuts are great for protecting your equipment from stripped threads and allow for convenient mounting of your server rack equipment.

A cage nut houses a standard nut in a cage with a spring.  The cage has two wings that can be pinched together to allow the cage nut to be inserted into a square hole.  The wings are then released to hold the cage nut in place.  Cage nuts come in many sizes but M5 and M6 cage nuts are mainly used in IT environments.  M6 is a heavier, more robust cage nut that M5.

Let’s take a look at mounting a Cage Nut on a rail in the StarTech.com 4POSTRACK25U.

In some situations, you may be advised to use a slot screwdriver to help install cage nuts.  However, you will find it much easier to use a cage nut mounting tool.

To install a cage nut, use your tool to attach one of the wings from the cage nut.  Keep the pressure on the cage nut with your finger and then attach the other wing.  The cage nut is now ready for the mounting screw.

To uninstall a cage nut, use your tool to release the cage nut wing on one side and then the other side.

You can check to see if your StarTech.com product includes cage nuts by navigating to the StarTech.com website, searching for the product, and checking the Technical Specifications tab under the heading What’s in the Box.

StarTech.com also sells cage nuts and screws in both M5 and M6 sizes which can be seen by navigating to Server Rack Accessories and the section Mounting Screws and Cage Nuts.

When you install your rack equipment, it’s important to put the heaviest equipment on the bottom of the rack, first.  This provides a strong base and is especially important if you are installing a lot of equipment on a tall rack.  This also prevents the server rack from becoming top heavy and falling over.

If your equipment is long, heavy, unbalanced or otherwise difficult to handle, ask someone to help you install the equipment so you don’t injure yourself or damage the equipment.

Finally, when you tighten down your screws make sure you don’t strip or damage the screws.  This is especially important to be aware of when using electric tools which can generate more torque.

The patch panel will be mounted using cage nuts, so the first step is to install them. 

Once installed, the cage nuts can be used to mount our patch panel. 

To install your server rack equipment, fasten the mounting screws into the cage nuts. After you tighten your screws, check to make sure your rack equipment is securely installed.

If you have questions about installing equipment into a server rack, contact our technical support team for further assistance. 

In this video, guidelines and best practices will be discussed for constructing server racks.  Constructing a new server rack can be a bit daunting, but there are some general guidelines that you can use when you assemble most of the server racks StarTech.com sells.  Let’s have a look at the guidelines.

Before You Begin

  1. Make sure there’s enough room where you will be building.
  2. If you intend to move the rack, make sure it will fit through any doors or hallways.

While Building

  1. Make sure that you have all of the parts listed in the manual.
  2. Make sure that you have all of the tools that you will need.
  3. Assemble the rack in the correct order, according to your manual.

After Building

  1. Double-check that everything is where it should be and then tighten everything down.
  2. Be careful not to strip screws.
  3. Install casters and any server rack accessories.

Now that you have reviewed the guidelines, you can begin assembling the server rack.

It is advised to take all of the parts out of the box and ensure they match up with the parts outlined in the manual.

You should also make sure that you have all of the tools that you need. 

First, the adjustable beams should be assembled. 

On this server rack, these adjustable beams control the depth of our rack and are marked with Index numbers.  The Index numbers allows you to set the depth of your rack, based on your equipment. Make sure that you choose the same Index numbers for all of the adjustable beams.  You can use the measurement chart in the manual for reference.

As you screw in your first screws, it is a good idea to only tighten them finger tight. That way, if you need to unscrew anything, you can do so easily. 

You should now have your adjustable beams together.

You will now use the beams to line up one set of left and right vertical rails and the top and base brackets.  It is often easiest to build the rack on its side.

There are a few important things that you should check for at this point in the assembly:

  • Make sure that the numbers on the adjustable beams and vertical rails are facing the right way
  • Make sure that you refer to the manual for the fastening pattern as this is crucial to the rack’s stability once it is assembled.  The same fastening pattern will be used for the other corners of the server rack.  For this rack, you can see that the screw is going through the top or base bracket, then the vertical rail, and then into the adjustable beam, in that order.  This is essential and will be the same for all of your corners.

The two adjustable beams, two of the vertical rails, and the top and base brackets should all be in place now.   You can now attach the other two vertical rails and our final two adjustable beams.

It’s time to double check that everything is in the right place before you tighten all of the screws.  Make sure that the numbers on your beams are all facing in the correct direction, the fastening pattern for each corner is correct, and that all of the cable guides are facing in the same direction.

Once you are sure that everything is correct, you can go ahead and tighten your screws, remember to be careful not to strip them.

Now that your rack is fully assembled, you can attach the casters and server rack accessories.  Note that all of your casters and server rack accessories should be installed facing in the same direction.  You may find it easier to invert the server rack to install the casters.

As you can see, rack builds are fairly straightforward as long as you take your time.  If you experience issues in setting up your StarTech.com server rack, contact the technical support team for further assistance. 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen