4-ports HDMI KVM-switch - 4K 30 Hz - dubbel skärm

Med denna 4K HDMI KVM med stöd för dubbelskärm kan du kontrollera fyra HDMI-datorer med en mus, tangentbord och dubbelskärmar upp till 4K vid 30 Hz.

Produkt ID: SV431DHD4KU

  • Videokvalitet med hög upplösning och stöd för dubbla 4K vid 30 Hz-skärmar
  • Två inbyggda USB 3.0-portar och oberoende portar för HID-tangentbord/-mus
  • Varken programvara eller drivrutiner behövs
Ditt pris
€1 034,99 EUR excl. VAT
€1 293,74 EUR incl. VAT

Med denna HDMI KVM-switch med 4 portar kan du kontrollera fyra HDMI-datorer med en mus, tangentbord och skärm upp till 4K 30 Hz. KVM:en har dessutom 3,5 mm ljudport och en inbyggd USB 3.0-hubb med 2 portar.

Dubbel 4K vid 30 Hz UHD-skärm

Denna HDMI KVM-switch med 4 portar har stöd för ultra-high-definition-upplösningar 4K 30 Hz och har förmågan att kristallklart driva dubbla HDMI-skärmar och är därför idealisk för grafiska tillämpningar som kräver UHD-kapacitet.

Enkel och kostnadseffektiv delning av USB 3.0-kringutrustning

Denna 4-ports KVM-switch har två USB 3.0-portar samt fyra portar för HID-tangentbord och -mus så att du kan dela kringutrustning mellan datorer och slippa kostnaden för separat utrustning. USB 3.0-hubben växlar dina anslutna enheter automatiskt till vald dator så att du slipper bekymret med att koppla ifrån och återansluta din kringutrustning.

Kapacitet för full multimedia

Vid sidan av dubbel UHD-videokapacitet erbjuder denna KVM-switch 3,5 mm dubbelriktade ljudportar med dubbla kanaler. Med detta oberoende analoga ljud kan du dela dina analoga ljudenheter, såsom högtalare eller en mikrofon mellan samtliga anslutna datorer, vilket ger dig total kontroll av multimedia på dina system.

SV431DHD4KU omfattas av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

 

Användning

  • Perfekt för tillämpningar som kräver två skärmar med hög upplösning, såsom grafisk design, medicinsk bildbehandling, digital skyltning, multimedia-design över fyra datorer
  • Utmärkt för alla som behöver dela höghastighetslagring mellan upp till fyra system
  • Perfekt för kreativa, professionella tillämpningar som till exempel video- och ljuddesign eller redigering.

Partnernummer

  • Ingram Micro Sweden V934360
  • ALSO Sweden 000000000003061188
  • UPC 065030840095

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Fraktvikt (förpackning) 1,8 kg [4,0 lb]
Package Length 29,5 cm [11,6 in]
Package Width 12,4 cm [4,9 in]
Package Height 85,0 mm [3,3 in]
Hårdvara Audio Yes
KVM-portar 4
PC-gränssnitt USB
PC-videotyp HDMI
Flera skärmar 2
Hyllmonterbar Optional
Indikatorer 4 - LED-indikatorer LED för källstatus och vald PC
1 - LED-indikatorer Ström-LED
Kontakt(er) 2 - Konsolgränssnitt HDMI
USB 3.1 Gen 1 USB Type-A (9 pin, 5 Gbps)
4 - Konsolgränssnitt USB Type-A (4 pin; HID Port) USB 1.1
1 - Konsolgränssnitt 3.5mm Stereo Female 3 pos
8 - Värdkontakter HDMI
4 - Värdkontakter USB 3.1 USB Type-B (9 pin, Gen 1, 5 Gbps)
3.5mm Stereo Female 3 pos
Miljö Drifttemperatur 0°C~40°C
Förvaringstemperatur -10°C~60°C
Luftfuktighet 0%~80%
Prestanda IP-kontroll No
Hot-Key Selection Yes
Maximal dataöverföringshastighet 5 Gbps
Maximal digital upplösning 3840 x2160 @ 30Hz
Stöd för widescreen Yes
Auto Scan 3, 8, 15 & 30 seconds
Stöd för portval Push Button and Hotkeys
Allmänna specifikationer Stöd för 3D-video: Ja
Medeltid mellan fel (MTBF) 168000 hours
Ström Power Source AC Adapter Included
Inspänning 100 - 240 AC
Inström 0.6 A
Utspänning 12V DC
Utström 1.5 A
Polaritet på mittpol Positive
Kontakttyp M
Strömförbrukning 18W
Utseende Färg Black
Kabinettyp Steel
Produktlängd 22,0 cm [8,7 in]
Produktbredd 13,0 cm [5,1 in]
Produkthöjd 6,3 cm [2,5 in]
Produktvikt 1,2 kg [2,7 lb]
Vad det är i lådan 1 - Ingår i paketet KVM-switch
snabbstartsguide
universell strömadapter (NA/JP, UK, EU, ANZ)
4 - Ingår i paketet Gummifötter

Tillbehör

SV431RACK

1U hyllmonteringsfästen för KVM-switch (SV431 Serien)

Montera en KVM-switch från 1U SV431-serien på ditt serverrack eller skåp

Ditt pris
€43,99 EUR excl. VAT
€54,99 EUR incl. VAT
Utgått
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Ditt pris
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Problemsökning

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

För att du ska kunna föra muspekaren mellan dina skärmar måste skärmarna i Windows vara arrangerade så att de matchar dess fysiska placering på skrivbordet. Gör följande baserat på ditt operativsystem:

Windows 10 och Windows 8

  1. Tryck på Windows-knappen + X på tangentbordet och välj Kontrollpanelen.
  2. Klicka på Utseende och anpassning, och sedan på Bildskärm.
  3. Klicka på Skärmupplösning eller Ändra skärmupplösning i den vänstra kolumnen, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

Windows 7 och Windows Vista

  1. Klicka på Start-knappen och välj Kontrollpanelen.
  2. Klicka på Utseende och anpassning, och sedan på Bildskärm.
  3. Klicka på Skärmupplösning eller Ändra skärmupplösning i den vänstra kolumnen, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

Windows XP

  1. Klicka på Start-knappen och välj Kontrollpanelen.
  2. Dubbelklicka på Bildskärm.
  3. Klicka på fliken Inställningar, vilket visar dina skärmar som numrerade ikoner.
  4. Klicka på Identifiera för att visa varje ansluten skärms nummer som visar hur operativsystemet har angett deras positioner.
  5. Klicka och dra skärmikonerna så att de matchar din fysiska uppställning.
  6. Klicka på OK för att godkänna ändringarna och stäng fönstret.

För att spegla bilden från din primära skärm istället för att utöka skrivbordet, se följande FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors

Before You Buy

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Vänta...
Tillbaka till toppen