Professionell VGA USB KVM-switch med 4 portar och hubb

Kontrollera upp till 4 PC- eller Mac®-datorer med ett enda tangentbord, en mus och en skärm och dela USB-enheter mellan alla anslutna datorer

Produkt ID: SV431USB

  • Stödjer hot-plug och urkoppling: datorer kan läggas till eller tas bort utan att behöva starta om andra anslutna system
  • Tryckknappar på frampanelen för snabb och enkel switching
  • 1920 x 1440 hög upplösning
Ditt pris
€125,99 EUR excl. VAT
€157,49 EUR incl. VAT

Rackmonteringsbar SV431USB VGA USB KVM-switch med hubb och 4 portar ger enkel kontroll för upp till fyra datorer från en enda bildskärm och USB-enhetssats (tangentbord, mus).

USB KVM-switchen har en integrerad USB hubb med 4 portar som gör det möjligt att dela anslutna USB-enheter mellan fyra kontrollerade PC/Mac-datorer som om enheterna vore direkt anslutna.

Ger praktiska placerings- och installationsvalmöjligheter. KVM-switchen har en 1U rackmonteringsbar formfaktor och en bakre portanslutning för Master- och Slave-datorer vilket gör det möjligt att ansluta enheter utan att röra till din arbetsyta.

En lösning för flera plattformar. KVM-switchen stödjer högupplösningsapplikationer på upp till 1920 x 1440 och ger en smidig driftupplevelse när den kontrolleras från flera plattformar (Windows/Mac OS/Linux).

Täcks av StarTech.coms 3-årsgaranti och gratis livstidsgaranti på teknisk support.

Hyllmontera din KVM-switch

Om du vill montera denna KVM-switch till din serverhylla har StarTech.com ett 1U hyllmonteringsfäste (säljs separat) som gör om denna KVM till en hyllmonterbar KVM.

Användning

  • Dela datorer och USB-enheter i hemma/små kontors/multimedia-miljöer
  • Perfekt för datorkontroll vid tillverkningslinjer med enkel åtkomst till multipla system
  • Bra till PC-test/burn-in datorkontroll och sparar på utrymmet av två skärmar, tangentbord och möss
  • Kontroll över dubbla system för arbetsstationer med en användare och ökar produktiviteten på kontoret

Fördelarna med StarTech.com

  • Integrerad USB 2.0-hubb gör det möjligt för användaren att dela USB-kringutrustningen och tar därmed bort kostnader för dubbla enheter
  • En helt och hållet OS-oberoende KVM-lösning som varken behöver mjukvara eller drivrutiner

Partnernummer

  • Ingram Micro Sweden V930458
  • ALSO Sweden 000000000002764279
  • UPC 065030787192

Kompatibilitet

Specifikationer

Warranty Information Warranty 3 Years
Förpackning Package Height 72 mm [2,8 in]
Package Length 29,5 cm [11,6 in]
Fraktvikt (förpackning) 1,3 kg [2,8 lb]
Package Width 19,6 cm [7,7 in]
Hårdvara Audio Nej
KVM-portar 4
PC-gränssnitt USB
PC-videotyp VGA
Flera skärmar 1
Hyllmonterbar Valfri
Medföljande kablar Nej
U-höjd 1U
Kedjekoppling Nej
Kontakt(er) 1 - Konsolgränssnitt VGA (15-stifts, High Density D-Sub)
4 - Konsolgränssnitt USB Type-A (4-stifts) USB 2.0
4 - Värdkontakter USB B (4-stifts)
VGA (15-stifts, High Density D-Sub)
Mjukvara OS-kompatibilitet OS independent; No software or drivers required
Prestanda Skärmvisning (OSD) & stöd för snabbtangenter Nej
DVI-stöd Nej
IP-kontroll Nej
Hot-Key Selection Nej
Maximal kabellängd 5 m [16,4 ft]
Maximal analog upplösning 1920 x 1440
Auto Scan 3, 8, 15 & 30 sekunder
Maximalt antal användare 1
Stöd för portval Tryckknapp
Medeltid mellan fel (MTBF) 82506 hours
Ström Power Source Medföljer ej (behövs ej vid vanlig användning)
Inspänning 110V-240V AC
Inström 0.4A
Utspänning 5 DC
Utström 2A
Polaritet på mittpol Positiv
Kontakttyp N
N
Särskilda anmärkningar/krav Obs. Man kan komma att behöva ytterligare en strömkälla för att kunna använda SV431USB med ett UBS-tangentbord som har flera USB-portar så som ett tangentbord från Apple Macintosh, eller för att kunna använda SV431USB med en USB-hubb
Utseende Produktvikt 988 g [34,9 oz]
Färg Svart
Kabinettyp Stål
Produktlängd 22 cm [8,7 in]
Produktbredd 13 cm [5,1 in]
Produkthöjd 44 mm [1,7 in]
Vad det är i lådan 1 - Ingår i paketet VGA USB KVM-switch med 4 portar
4 - Ingår i paketet Gummifötter
1 - Ingår i paketet Instruktionsbok

Tillbehör

SVUSB2N1_6

1,8 m 2-i-1 USB KVM-kabel

Anslut VGA- och USB-utrustade datorer till en KVM-switch genom att använda en enda kabel

Ditt pris
€10,99 EUR excl. VAT
€13,74 EUR incl. VAT
SVUSB2N1_10

3 m 2-i-1 universell USB KVM-kabel

Anslut VGA- och USB-utrustade datorer till en KVM-switch genom att använda en enda kabel

Ditt pris
€19,99 EUR excl. VAT
€24,99 EUR incl. VAT
SVUSB2N1_15

15 ft 2-in-1 Universal USB KVM Cable

Connect VGA and USB-equipped computers to a KVM Switch using a single cable

Ditt pris
€32,99 EUR excl. VAT
€41,24 EUR incl. VAT
MXT101MMHQ3

3 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€8,99 EUR excl. VAT
€11,24 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€14,99 EUR excl. VAT
€18,74 EUR incl. VAT
MXT101MMHQ25

7,6 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€25,99 EUR excl. VAT
€32,49 EUR incl. VAT
SV431RACK

1U hyllmonteringsfästen för KVM-switch (SV431 Serien)

Montera en KVM-switch från 1U SV431-serien på ditt serverrack eller skåp

Ditt pris
€39,99 EUR excl. VAT
€49,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Installation

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Problemsökning

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

Before You Buy

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...