12in LP4 to 2x Latching SATA Power Y Cable Splitter Adapter - 4 Pin Molex to Dual SATA
Power two SATA drives from a single LP4 power supply connector
Product ID: PYO2LP4LSATA
The PYO2LP4LSATA LP4 Molex to Dual Latching SATA power splitter cable features two Serial ATA female power connectors and one LP4 male connector - a reliable solution that enables you to power two SATA drives using a single LP4 connection to the computer power supply.
This durable LP4 to SATA Y cable adapter is 12 inches in length, giving you enough cable slack to position drives as needed within the computer case, while saving the cost and hassle of upgrading a power supply for compatibility with Serial ATA drives.
Expertly designed and constructed of top quality materials, the 4-pin Molex to SATA Splitter Power cable is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Cost-effective solution for powering two SATA drives from a single LP4 connection on the computer power supply, which eliminates the cost of a power supply upgrade for compatibility with SATA hard drives
- Provides secure SATA latching connectors which reduces the risk of accidental disconnections
- Backed by StarTech.com lifetime warranty
Connect two Serial ATA hard drives to a standard LP4 Molex connection on your power supply
Compatible with Serial ATA hard drives, CD-RW drives, DVD-ROM drives, and other devices
|Ingram Micro Australia||2334855|
|Connector A||1 - LP4 (4 pin, Molex Large Drive Power) Male|
|Connector B||2 - SATA Power (15 pin) Latching Receptacle|
|Cable Length||12 in [304.8 mm]|
|Product Length||12 in [304.8 mm]|
|Product Weight||1 oz [28 g]|
|Wire Gauge||20 AWG|
|Shipping (Package) Weight||0.1 lb [0 kg]|
|What's in the Box|
|Included in Package||1 - 12in LP4 to 2x Latching SATA Power Y Cable Adapter|
Power two SATA drives from a single LP4 power supply connector.
Power a Serial ATA hard drive from a conventional LP4 power supply connection
Frequently Asked Questions
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.