6in 4 Pin LP4 to SATA Power Cable Adapter
Power a Serial ATA hard drive from a conventional LP4 power supply connection
Product ID: SATAPOWADAP
- Provides 6 inches in cable length
- Connects a Serial ATA Hard Drive to a standard internal power connector – SATA (15 pin) to 4 pin Molex (LP4)
- Provide power to your Serial ATA hard drive through a standard Molex connection from your power supply
- Compliant with Serial ATA 3.0 standard
This 6in 4 Pin LP4to SATA power adapter cable features one 4 Pin LP4 male connector and one female SATA power connector, allowing you to power a Serial ATA hard drive from a conventional LP4 connection, eliminating the need to upgrade the computer power supply for compatibility with the SATA hard drive.
This LP4 to SATA adapter is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Compatible with both 2.5” and 3.5” Serial ATA Hard Drives allows the use of newer hard drives with older power supplies
- Backed by a StarTech.com lifetime warranty and free technical support
Ingram Micro Australia
|Cable Jacket Material||PVC - Polyvinyl Chloride|
|Connector A||1 - LP4 (4 pin; Large Drive Power) Male|
|Connector B||1 - SATA Power (15 pin) Receptacle|
|Operating Temperature||20°C to 80°C (68°F to 176°F)|
|Storage Temperature||24°C to 25°C (75.2°F to 77°F)|
|Cable Length||6 in [152.4 mm]|
|Product Length||6.3 in [160 mm]|
|Weight of Product||0.5 oz [13 g]|
|Package Height||0 in [0.6 mm]|
|Package Length||5 in [12.8 cm]|
|Package Width||8.6 in [219.5 mm]|
|Shipping (Package) Weight||0.6 oz [17 g]|
|What's in the Box|
|Included in Package||1 - 6 inch LP4 Male to SATA Power Adapter|
Power two SATA drives from a single LP4 power supply connector.
Power two SATA drives from a single LP4 power supply connector
Add an extra SATA power outlet to your PC Power Supply
Add an extra SATA power outlet to your Power Supply
Connect an IDE hard drive to a Serial ATA power connector
Power an LP4 device from a SATA Power connection on your computer power supply
Power an IDE hard drive from a SATA Power connection.
Frequently Asked Questions
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.