StarTech.com

10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km

Extend your 10/100Mbps network by up to 1km over Ethernet or RJ11 phone lines

Product ID: 110VDSLEXT

  • IEEE 802.1Q VLAN tag transparent
  • Selectable CPE and CO mode via DIP switch
  • Supports flow control for Fast Ethernet (pause frame or Back Pressure)
View More
  • Allows you the ability to select fixed SNR margin (9 dB) or fixed target data rate
  • Light in weight and a very compact design
  • Supports both symmetric and asymmetric transmission
$623.99 AUD exc GST
$686.39 AUD inc GST

Overview

The 110VDSLEXT VDSL Ethernet extender kit lets you span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity, allowing you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.

A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference.

Solution Diagrams:
Solution Diagrams

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage

  • Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away
  • Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible
  • Simple Plug and play installation with no software or driver installation for a hassle-free setup

Applications

Provide ethernet over copper connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether

Extend network connectivity to remote areas of stadiums, auditoriums or other venues

Industrial applications include controlling CNC machinery, polling bar code scanner data, administering process control equipment, and other harsh environment applications

Monitor and control medical equipment, security keypads/card scanners, point of sale equipment and remote sensor data, and various other healthcare related network communications

Remote sensor monitoring for traffic flow management (air traffic control, expressway flow)

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Industry Standards IEEE 802.3/802.3u/802.3x 10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X
On-board surge protection
VDSL2 ITU-T G.993.2, VDSL ITU-T G.993.1, and VDSL2/VDSL ITU-T G.997.1 compliant
Performance
Max Distance 1 km (0.6 mi)
Maximum Data Transfer Rate 0m - 100Mbit/s
300m - 75Mbit/s
1km - 10Mbit/s
Connector(s)
Local Unit Connectors 2 - RJ-45 Female
Remote Unit Connectors 2 - RJ-45 Female
Special Notes / Requirements
Note You have the ability to use up to four sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (Up to two sets only over standard Cat5).
Indicators
LED Indicators 3 - LAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
3 - VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
Power
Output Voltage 12 DC
Power Source 2 AC Adapters Included
Environmental
Humidity 10~90% RH
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature 0°C to 70°C (32°F to 158°F)
Physical Characteristics
Color Black
Product Height 0.9 in [22 mm]
Product Length 3.7 in [95 mm]
Product Weight 3.2 oz [90 g]
Product Width 2.8 in [72 mm]
Packaging Information
Shipping (Package) Weight 2.1 lb [0.9 kg]
What's in the Box
Included in Package 1 - Ethernet VDSL Extender
1 - Ethernet VDSL Receiver
2 - RJ-45 to VDSL Cable
2 - Power Adapter
1 - Instruction Manual

Certifications

Accessories

Product Support

Frequently Asked Questions

Troubleshooting

When you troubleshoot issues with a VDSL Extender, there are some quick tests that you can complete to rule out potential problems. To identify what the source of the issue is, observe the power LED, LAN LED, and VDSL LED on the units.

If the power LED is not illuminated for the transmitter or the receiver, complete the following:

  • Make sure that you are using the provided power adapter(s).
  • Make sure that the adapter is plugged into a compatible wall outlet.
  • Make sure that the adapter is plugged into both the transmitter and receiver.

If another LED is not operating as expected, make sure that the components in your setup are working correctly. To test your setup components, try the following:

  • Use the cables, VDSL extender, and network devices in another setup to see if the problem is with the components or the setup.
  • Use different cables, a different VDSL extender, and network devices in your setup to see if the problem persists. Ideally, you should test components that you know work in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

Make sure that the DIP switches are set to the following:

  • DIP switch one (CO/CPE) is opposite on both units. It does not matter which unit is set to CO or CPE.
  • DIP switches two to four are identical on both local and remote units. By default, DIP switches two to four are set to Off (the switch is pointing up).

If there is still no VDSL connection or if there is intermittent connection issues, try the following:

  • Modify the Signal to Noise Ratio (SNR) by changing switch four on both units.
  • Modify the operation mode of the unit by changing switch two or three so that they match on both units.

If you cannot establish a network connection between your remote and local units, you need to do the following to make sure that the issue is not related to the network configuration:

  • Use two computer systems directly connected to the VDSL extender LAN ports.
  • Open a command prompt on Computer 1 and ping Computer 2.

If the issue is not related to the network configuration, you should receive a response from Computer 2.

For more information on how to ping another network device, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=networking#ping-test-windows-mac-os.