Cisco SFP-GE-S Compatible Gigabit Fiber SFP Transceiver Module MM LC w/ DDM - 550m (Mini-GBIC)
Add, replace or upgrade SFP modules on Gigabit fiber equipment
Product ID: SFPGESST
- Data rates up to 1.25 Gbps
- Supports distances up to 550m (1804ft)
- Complies with SFP Multi-Source Agreements standards (MSA)
- Compatible with Cisco equipment
- LC Fiber connector
- Fully Hot Pluggable
Overview
The SFPGESST Cisco® Compatible Gigabit Fiber SFP Transceiver Module MM LC - 550m (1804 ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Multimode LC port on your Gigabit fiber networking equipment or fiber media converter.
Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.
This 850nm multi-mode SFP module is compatible with the Cisco SFP-GE-S transceiver.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
The StarTech.com Advantage
- Replacing defective or damaged SFPs/Mini GBICs in MSA or Cisco compliant equipment
- Equipped with an industry standard single-mode LC interface, this module can extend your network connectivity up to 550 m
Applications
Replacing defective or damaged SFPs in MSA compliant or Cisco equipment
Expand your network to remote segments
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro Australia | 2343485 | |
| UPC Code | 065030849432 | |
| Warranty Information | ||
|---|---|---|
| Warranty | Lifetime | |
| Hardware | ||
| Compatible Brand | Cisco | |
| Industry Standards | IEEE 802.3z 1000BASE-SX | |
| WDM | No | |
| Performance | ||
| Compatible Networks | 1000 Mbps (1 Gbps) | |
| DDM | Yes | |
| Fiber Operating Mode | Half/Full-Duplex | |
| Fiber Type | Multi Mode | |
| Max Transfer Distance | 550 m (1804 ft) | |
| Maximum Data Transfer Rate | 1.25 Gbps | |
| MTBF | 3,381,761 hours | |
| Wavelength | 850nm | |
| Connector(s) | ||
| Local Unit Connectors | 1 - Fiber Optic LC Duplex Female | |
| Special Notes / Requirements | ||
| Note | For use in Gigabit fiber networking equipment and media converters | |
| System and Cable Requirements | MSA or Cisco compliant SFP port | |
| Environmental | ||
| Humidity | 30~70% RH | |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) | |
| Storage Temperature | -40°C to 85°C (-40°F to 85°F) | |
| Physical Characteristics | ||
| Product Height | 0.4 in [10 mm] | |
| Product Length | 2.4 in [60 mm] | |
| Product Weight | 0.6 oz [17 g] | |
| Product Width | 0.5 in [12 mm] | |
| Packaging Information | ||
| Shipping (Package) Weight | 3.4 oz [95 g] | |
| What's in the Box | ||
| Included in Package | 1 - 1.25 Gbps Multimode LC SFP | |
Certifications
Related Products
Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m
Add, replace or upgrade SFP modules on gigabit fiber equipment
Cisco GLC-LH-SMD Compatible Gigabit Fiber SFP Transceiver Module SM LC w/ DDM - 20 km (Mini-GBIC)
Add, replace or upgrade SFP modules on Gigabit fiber equipment
Cisco GLC-FE-100FX Compatible 100 Mbps Fiber SFP Transceiver Module MM LC w/ DDM - 2 km (Mini-GBIC)
Add, replace or upgrade SFP modules on 100 Mbps fiber equipment
Accessories
PCI Express Gigabit Ethernet Fiber Network Card w/ Open SFP - PCIe SFP Network Card Adapter NIC
Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice
8-Port PoE+ Gigabit Ethernet Switch plus 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management
8-Port Gigabit Ethernet Switch with 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 GbE devices to your network, using 8 RJ45 and 2 fiber-optic connections, with intelligent Layer 2 management support
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 2 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 3 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Gigabit Ethernet Fiber Media Converter with Open SFP Slot
Convert and extend different networks over a Gigabit fiber cable connection using the SFP of your choice
Product Support
Drivers & Downloads
Compliance Letter(s):
Data Sheet(s)
- SFPGESST_Datasheet.pdf
English
Frequently Asked Questions
Before You Buy
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
-
The connector type, such as LC, SC, or ST.
-
The mode (single mode or multi mode).
-
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
-
The DDM support.
-
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
Follow us on Twitter | Find us on Google+