Product ID: SV411KUSB
In stock: 23
The SV411KUSB 4 Port USB KVM Switch Kit with Audio and Cables lets you control up to four USB-enabled computers using a single keyboard, mouse and VGA monitor and offers both hotkey and top panel push-button operation for simple switching between connected computers.
Designed to integrate seamlessly into any environment, the USB KVM switch offers a small footprint design (roughly the size of a deck of playing cards) and draws power from the connected computers, so it doesn't require an external power supply.
A suitable solution for virtually any application, the USB KVM switch supports video resolutions of up to 2048 x 1536 as well as audio switching. The USB KVM switch includes four, 4ft 4-in-1 VGA and USB Host Cables, providing everything needed for quick installation to provide a complete, out-of-the-box KVM solution.
Delivering dependable and convenient control of multiple computers from a single peripheral station, the KVM switch is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Console Interface(s)||VGA (15 pin, High Density D-Sub)|
|2 - Console Interface(s)||USB Type-A (4 pin) USB 2.0|
|3.5 mm Mini-Jack (3 Position)|
|8 - Host Connectors||3.5 mm Mini-Jack (3 Position)|
|4 - Host Connectors||VGA (15 pin, High Density D-Sub)|
|PC Video Type||VGA|
|Number of Monitors Supported||1|
|Packaging Information||Package Height||14.5 cm [5.7 in]|
|Package Length||21 cm [8.3 in]|
|Shipping (Package) Weight||1.4 kg [3.1 lb]|
|Package Width||18 cm [7.1 in]|
|Maximum Analog Resolutions||2048 x 1536 pixels|
|Maximum Number of Users||1|
|Port Selection Support||Push Button and Hotkeys|
|Physical Characteristics||Weight of Product||189 g [6.7 oz]|
|Cable Length||1.2 m [4.0 ft]|
|Product Width||95 mm [3.7 in]|
|Product Height||2.5 cm [1.0 in]|
|Product Depth||61 mm [2.4 in]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||4 Port KVM Switch|
|4 - Included in Package||4ft. VGA USB KVM Cable|
|4ft. Audio Cable (3.5mm speaker/mic)|
Connect your computer or audio device (iPod®, MP3 Player, etc.) to a stereo with standard RCA cables
In stock: 2580
In stock: 216
Monitors may begin flickering when they receive a signal of insufficient quality. There are a few potential fixes available that will help to improve the signal quality in order to eliminate flickering:
Check that you are using the recommended 2 in 1 (or 4 in 1) cables from StarTech.com. Some KVM switches only work with combo cables pinned out specifically for them. The correct cables will be shown in the Accessories tab on the product page for your KVM switch.
There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds. Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.
You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVR or computer)
Video destination (such as a monitor or projector)
Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.
To test your setup components, try the following:
Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.
There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch.
If the keys on your keyboard are repeating, complete the following:
Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.
KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers. KVM switches also commonly let you switch audio and USB devices between computers.
There are different types of KVM switches as well.
Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers. Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.
Here are some important things to consider before purchasing a KVM switch.
There are a couple of other important things you may want to take note of:
It can be difficult to tell which ones are right for the KVM switch you are interested in. How can you tell which KVM cables you require? How can you tell if a KVM switch requires proprietary cables? How do these cables work?
Standard KVM Switches and Cables
Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.
Standard KVM switches have no special cable requirements. If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers. StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings. Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.
KVM Switches with Opposite Gender Video Connections
Some KVM switches use male video connections for the computers and female video connections for the console ports. In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch. This is so you cannot accidentally plug cables from your computer into the console ports.
KVM Switches Requiring Proprietary Cables
KVM switches can also use proprietary KVM cables to connect to the individual computers. This is often done with larger KVM switches and KVM switches intended for a server environment. These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.
If you are unsure whether or not you need special cables, complete the following:
Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.
If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.
Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use. Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues. This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards. We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.
If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.
Check out our review guidelines.