VGA-videosplitter med audio och 2 portar - USB-driven

Dela en VGA-signal till två VGA-skärmar eller -projektorer

Produkt ID: ST122LEA

  • Kompakt, utrymmesbesparande design
  • USB-nätsladd medföljer
  • 300 MHz bandbredd för snabbrörlig video med hög bandbredd
Ditt pris
€33,99 EUR excl. VAT
€42,49 EUR incl. VAT

ST122LEA VGA-videodelaren med audio och USB-strömsättning med två portar är vår mest kompakta VGA-delare, Med den kan en dator samtidigt visa VGA-video på två skärmar från en enda källa.

Stöd för upplösningar på upp till 2048x1536 och stereoljud gör den här enheten perfekt för klassrum, mässor eller andra miljöer där video av hög kvalitet visas på flera skärmar.

Denna VGA-delare hämtar ström från din dator eller mediaspelare med hjälp av en ledig USB-port istället för att använda en standardströmadapter vilket gör den lätt att installera där det inte finns några eluttag. Delaren har även en inbyggd boosterkrets som gör att du kan placera VGA-skärmar upp till 60,9 m bort från ditt system.

Täcks av StarTech.coms 2-årsgaranti och GRATIS livstidsgaranti på teknisk support.

Användning

  • Idealisk för små digitala identifieringsinstallationer med minimalt med utrymme eller eluttag – koppla bara in den i en USB-port
  • Använd den för att marknadsföra produkter i handeln så att din reklam syns bättre.
  • Visa resescheman och upplysningar på flygplatser, bussterminaler och tågstationer
  • Skapa engagerande multimedia-presentationer för visning i föreläsningssalar och klassrum
  • Få igenom ditt budskap via flera skärmar för mässor eller informationsbås/kiosker
  • Snabb och enkel lösning för att dela en videosignal i ett auditorium eller plats för tillbedjan

Fördelarna med StarTech.com

  • Kompakt och utrymmesbesparande design, medföljande USB-nätsladd när inga eluttag finns tillgängliga
  • Integrerad signalförstärkare förstärker din anslutningsvidd upp till 65 m
  • Med flera skärmar kan du få fram ditt budskap mer effektivt till en större målgrupp och med större effekt

Partnernummer

  • ALSO Sweden 000000000002764214
  • UPC 065030839778

Specifikationer

Warranty Information Warranty 2 Years
Förpackning Package Height 47,0 mm [1,9 in]
Package Length 14,5 cm [5,7 in]
Fraktvikt (förpackning) 246,0 g [8,7 oz]
Package Width 21,0 cm [8,3 in]
Hårdvara Portar 2
AV-ingång VGA
AV-utgång VGA
Kablage Cat 5 UTP eller bättre
Audio Ja
Industristandarder DDC, DDC2, DDC2B i videoutgångsport 1
Indikatorer 1 - LED-indikatorer Grön – ström
Kontakt(er) 1 - Connector A VGA (15-stifts, High Density D-Sub)
3.5 mm minijack (3-polig)
1 - Connector B 3.5 mm minijack (3-polig)
2 - Connector B VGA (15-stifts, High Density D-Sub)
Miljö Drifttemperatur 0°C to 70°C (32°C to 158°C)
Förvaringstemperatur -20°C to 85°C (-4°C to 185°C)
Luftfuktighet 0~95 % RH
Prestanda Maximal kabellängd 65 m [213,2 ft]
Maximal analog upplösning 2048x1536
Stöd för widescreen Ja
Ström Power Source Strömförsörjd via USB
Utspänning 5 DC
Utström 0.5A
Utseende Produktvikt 111,0 g [3,9 oz]
Färg Svart
Kabinettyp Av plast
Produktlängd 68,0 mm [2,7 in]
Produktbredd 53,0 mm [2,1 in]
Produkthöjd 23,0 mm [0,9 in]
Vad det är i lådan 1 - Ingår i paketet Video splitter
USB till DC-strömkabel
Användarhandbok

Tillbehör

USB2TYPEM

USB till 5,5 mm strömkabel - cylindrisk kontakt av typ M - 91 cm

Strömförse dina 5 V DC-enheter via din dators USB-port

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Ditt pris
€12,99 EUR excl. VAT
€16,24 EUR incl. VAT
MXT105MMHQ

4,5 m koaxialkabel för VGA-skärm med hög upplösning, HD15 M/M

Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.

Ditt pris
€16,99 EUR excl. VAT
€21,24 EUR incl. VAT
MU6MMS

6 ft Slim 3.5mm Stereo Audio Cable - M/M

Connect an iPhone® or other MP3 player to a car stereo

Ditt pris
€2,99 EUR excl. VAT
€3,74 EUR incl. VAT
MU10MMS

3 m Slim 3,5 mm stereoaudiokabel - M/M

3 m slimmad 3,5 mm stereoaudiokabel

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT
MU15MMS

4,5 m Slim 3,5 mm stereoaudiokabel - M/M

Anslut enkelt en iPod eller annan MP3-spelare till stereon

Ditt pris
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT
Utgått
MU1MMRCA

1 ft Stereo Audio Cable - 3.5mm Male to 2x RCA Male

Connect your Computer or Audio Player to an RCA Audio Device

Ditt pris
€1,99 EUR excl. VAT
€2,49 EUR incl. VAT
MU3MMRCA

3 ft Stereo Audio Cable - 3.5mm Male to 2x RCA Male

Connect your Computer or Audio Player to an RCA Audio Device

Ditt pris
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT
MU6MMRCA

1,8 m stereoaudiokabel - 3,5 mm hane till 2x RCA hane

Koppla din dator eller ljudspelare till en RCA-ljudenhet

Ditt pris
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

Drivers/Downloads

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Manual(er):

Datasheet

Produktsupport

Prata med en rådgivare.

Vi är alltid redo att hjälpa dig med alla dina frågor.

Direktchatt (opens in new window)

Vanliga frågor

Problemsökning

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video splitter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.

Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.

If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:

  1. Unplug all of the video connections.

  2. If the splitter is powered, power cycle the splitter.

  3. Plug in all of the video connections again.

  4. Make sure that the first video connection plugged in is the one that you want to be the master port.

You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage

Before You Buy

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.
Tillbaka till toppen
Vänta...