Produkt ID: VS221HD2VGA
Den VS221HD2VGA automatiska VGA- & HDMI-switchen låter dig ansluta två olika A/V-källor - en VGA och en HDMI till samma VGA-skärm- eller projektor och automatiskt eller manuellt växla mellan vilken videokälla som ska visas. Denna switch med flera ingångar stöder videoupplösning på upp till 1920x1200 (1080p) och levereras med monteringsutrustning för en städad och professionell installation.
A/V-switchen har inbyggd HDMI-konvertering så att du kan ansluta en HDMI- och en VGA-videokälla till samma VGA-skärm utan att behöva använda extra adaptrar eller scalers. Switchen stöder även EDID-genomströmning, EDID-kopiering och EDID-emulering för att garantera att de ursprungliga HDMI- och VGA-upplösningarna behålls mellan båda källanslutningarna.
VS221HD2VGA garanterar problemfri användning med stöd för prioriterat portval så att du kan välja vilken port som ska väljas först i en sekvens. När enheten som är ansluten till den specifika porten aktiveras kommer switchen automatiskt välja den porten.
A/V-switchen är designad med styrelserummet och klassrummet i åtanke. VS221HD2VGA har VGA- och HDMI-ingångar som stöder många olika enheter och den inbyggda konverteraren gör det enkelt att ansluta till en skärm utan att behöva använda extra adaptrar. Dessutom uppmuntrar prioriterad växling till supersnabbt samarbete bland studenter eller kollegor genom att göra det enkelt att dela projektorn mellan flera källenheter.
Obs.: Digitalt krypterat innehåll från HDMI-videokällan visas inte på VGA-skärmen. Om du söker en liknande enhet med HDMI-utgång, se vår VS221VGA2HD.
VS221HD2VGA täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Förpackning | Package Height | 66,0 mm [2,6 in] |
Package Length | 23,7 cm [9,3 in] | |
Package Width | 15,5 cm [6,1 in] | |
Fraktvikt (förpackning) | 600,0 g [21,2 oz] | |
Hårdvara | Portar | 2 |
AV-ingång | HDMI | |
AV-utgång | VGA | |
AV-ingång | VGA | |
Audio | Ja | |
Indikatorer | 1 - LED-indikatorer | VGA-port vald |
HDMI-port vald | ||
Kontakt(er) | 1 - Connector A | VGA (15-stifts, High Density D-Sub) |
1 - Connector B | VGA (15-stifts, High Density D-Sub) | |
1 - Connector A | HDMI (19-stifts) | |
Miljö | Drifttemperatur | 0°C to 40°C (32°F to 104°F) |
Förvaringstemperatur | -20°C to 60°C (-4°F to 140°F) | |
Luftfuktighet | 0%~80% | |
Prestanda | Maximal analog upplösning | 1920x1200 |
Maximal digital upplösning | 1920x1200 | |
Stödda upplösningar | Supports resolutions up to 1920x1200 / 1080p | |
Stöd för widescreen | Ja | |
Audio-specifikationer | 3,5 mm stereoaudio i 2 kanaler | |
Ström | Power Source | AC-adapter medföljer |
Inspänning | 100 - 240 AC | |
Inström | 0.4 A | |
Utspänning | 5 DC | |
Utström | 2 A | |
Strömförbrukning | 10 | |
Särskilda anmärkningar/krav | Obs. | Digitalt krypterat innehåll från HDMI-videokällan visas inte på VGA-skärmen |
Utseende | Kabinettyp | Stål |
Produktlängd | 84,0 mm [3,3 in] | |
Produktbredd | 59,0 mm [2,3 in] | |
Produkthöjd | 20,0 mm [0,8 in] | |
Produktvikt | 172,0 g [6,1 oz] | |
Vad det är i lådan | 1 - Ingår i paketet | VGA+HDMI till VGA-konverteringsswitch |
Monteringsfästen | ||
universell strömadapter (NA, EU, UK, ANZ) | ||
Instruktionsbok |
Connect your VGA monitor with the highest quality connection available
Anslut din VGA-skärm med anslutning av högsta tillgängliga kvalitet.
Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display
Connect an iPhone® or other MP3 player to a car stereo
Anslut enkelt en iPod eller annan MP3-spelare till stereon
Connect your Computer or Audio Player to an RCA Audio Device
Connect your Computer or Audio Player to an RCA Audio Device
Koppla din dator eller ljudspelare till en RCA-ljudenhet
Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)Vi är alltid redo att hjälpa dig med alla dina frågor.
Direktchatt (opens in new window)When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video switch
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI switch, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video switch from your setup and test to make sure that the video source and video destination work together without the video switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, switch, and destination all need to support the resolution that you are using.
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
Target connection | First conversion | Second conversion (if required) |
DVI-D | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI-I | VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. | N/A |
HDMI |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
N/A |
DisplayPort | VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. | HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort. |
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source Connection |
Conversion |
VGA |
VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. |
DVI |
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/. DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/. |
DisplayPort |
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive. DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active. |
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
This device has a VGA input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
Source connection |
Conversion |
DVI-I |
DVI-I to VGA: https://www.startech.com/DVIVGAMFBK. |
DVI-D |
DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA. |
HDMI |
HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA. |
DisplayPort |
DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/. |
When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals. Some DVI-I connections only support DVI-D signaling. In this case, you must use a DVI-D to VGA converter.